F-215 SUPPLEMENT ™ TFSD–15–30–G–05.00–D–NUX D I S CR ETE •• • • • •• TFSDT–05–30–G–05.00–D–NUS (1,27 mm) .050" TFSD, TFSDT SERIES ™ TIGER EYE DISCRETE CABLE ASSEMBLY SPECIFICATIONS For complete specifications see www.samtec.com?TFSD or www.samtec.com?TFSDT Single or Double Ended Mates with: SFM, SFC (–TR requires TFM–WT option), SFML (–XL end option required) Insulator Material: Black LCP Contact Material: BeCu Plating: Au over 50µ" (1,27 µm) Ni Operating Temp Range: -10°C to +80°C (PVC) -40°C to +125°C (*Teflon®) Wire: 28 or 30 AWG RoHS Compliant: Yes 28 or 30 AWG (1,27 mm) .050" pitch RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality TYPE STRIP TFSD = Double Row PVC Cable TFSDT ALSO AVAILABLE POSITIONS PER ROW WIRE GAUGE –03, –04, –05, –07, –10, –15, –20, –25, –40, –50 ASSEMBLED LENGTH –30 –G = 30 AWG = 10µ" (0,25 µm) Gold on contact –“XX.XX” –28 = 28 AWG (Standard sizes) END 2 T-NUS T-NDS T-NUX T-NDX = Double Row *Teflon® Cable (MOQ Required) • Color coded cable (*Teflon® N/A) • Other plating options Contact Samtec. PLATING OPTION No. of Positions x (1,27) .050 + (2,54) .100 END OPTION Pin 1 to Pin N Pin 1 to Pin 1 Pin 1 and Pin N-1 Pin 1 to Pin 2 End 1 Notch (Always Down) (1,27) .050 = Assembled Length in Inches (76,20 mm) 03.00" min. for –S end option (82,60 mm) 03.25" min. for –D end option Note: Some lengths, styles and options are non-standard, non-returnable. –D END 2 OPTION Requires –D, –TF or –TR (End 1 Notch Down). = Double Ended –NUS –T = Notch up, straight (Pin 1 to Pin 2) = Transfer End Terminal on End 1 Socket on End 2 (See chart for End 2 option) –TR = Transfer End with Retention Latch (TFM –WT option required for mating) (14,26) .562 Note: Teflon® cable is intended for crimp only. Contact Samtec for solderable cable applications. = Single Ended = Transfer End with Friction Lock (–05 & –07 positions not available.) *DuPont™ Teflon ® is a registered trademark of the E.I. du Pont de Nemours and Company or its affiliates. (6,05) .238 –S –TF End 1 Notch (Always Down) (6,10) .240 Note: For wiring option and pin position location information, refer to drawings on web. END OPTION –NDS = Notch down, straight (Pin 1 to Pin N-1) –NUX = Notch up, crossed (Pin 1 to Pin 1) –NDX = Notch down, crossed (Pin 1 to Pin N) Assembled Length ± (3,18) .125 End 2 Notch (NUS) End 2 Notch (NDX) End 2 Notch (NUX) End 2 Notch (NDS) –NDS or –NUS –NDX or –NUX WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice.