F-214 SUPPLEMENT ® EQRP–018–08.00–STR–TTL–1 (0,80 mm) .0315" EQRP SERIES ® Q RATE TWINAX CABLE ASSEMBLY SPECIFICATIONSi Edge Rate™ contacts Mates with: QRF8-DP, QRM8-DP For complete specifications and recommended PCB layouts see www.samtec.com?EQRP Cable: 32 AWG twinax micro ribbon Signal Routing: 100Ω Differential Cable Bending Radius: (11,11 mm) 7/16" min Plating: Au over 50µ" (1,27 µm) Ni Current Rating: Signal Contact: .6 A per pin (All adjacent pins powered) Ground Plane: 7.9 A per ground plane (1 ground plane powered) Propagation Delay: 4.67 nsec/meter Operating Temp Range: -25°C to +105°C Skew (pair-to-pair): <10 ps/ft Skew (within a pair): <5 ps/ft EMI Performance: FCC Class A RoHS Compliant: Yes RECOGNITIONS s ocol t o r d P orte p p u S Differential routing SAS SATA el Fibre Chann et n er Eth ® PCIe ™ InfiniBand 32 AWG twinax ribbon cable ™ Integral ground/ power plane report at Download test ?EQRP m co c. te www.sam Slim body design Patent Pending WIRE LENGTH NO. OF PAIRS EQRP END NO. 1 END NO. 2 WIRING OPTION SCREW OPTION –1 Leave blank for no Screw Option For complete scope of recognitions see www.samtec.com/quality –018, –036, –054 Cable Length (Number of Pairs) Rated @ 7dB Insertion Loss –TTR –“XX.XX” = Wire Length in Inches (43,7 mm) 01.72" minimum = Terminal, Top Right OAL = Wire Length + (20,82) .820 EQRP 6" (152,4 mm) 5.82 GHz / 11.64 Gbps N-1 N N N-1 –3 –TBL = Pin 1 to Pin N-1 = Terminal, Bottom Left –STR A = Pin 1 to Pin N –STL –SBR 01 02 –SBL 02 (3,28) .129 DIA (5,08) .200 (18,93) .745 = Socket, Bottom Left NO. OF POSITIONS (12,44) .490 (11,12) (7,62) .438 .300 –018 –036 –054 END NO.1 (–F SHOWN) END NO.2 WWW.SAMTEC.COM –S = Screw option (Second end only) = Screw option (Both ends) = Socket, Bottom Right 01 –F = Screw option (First end only) –B = Socket, Top Left Processing conditions will affect mated height. Note: Some lengths, styles and options are non-standard, non-returnable. –4 = Socket, Top Right C 11.5 mm or 14.45 mm Note: Design your High Speed Cable with Samtec’s High Speed Cable Solutionator® at www.samtec.com/hdr –2 = Pin 1 to Pin 2 = Terminal, Bottom Right D Note: Cable lengths longer than 40.00" (1 meter) are not supported with S.I. test data. –TTL = Terminal, Top Left –TBR 39.37" ( 1 m) 5.10 GHz / 10.20 Gbps Performance data for other cable lengths and complete test data available at www.samtec.com?EQRP or contact [email protected] APPLICATIONS = Pin 1 to Pin 1 A C D (33,02) 1.300 (57,81) 2.276 (82,63) 3.253 (39,12) 1.540 (63,91) 2.516 (88,70) 3.492 (46,74) 1.840 (71,53) 2.816 (96,32) 3.792