F-215 ™ FMTP–10–D–03.85–01 UUUUUUUUUUUUUUUUUUU (1,27 mm) .050" FFTP, FMTP SERIES FFTP–20–D–08.77–01–N ™ TIGER EYE TWISTED PAIR IDC CABLES FFTP Mates with: FTS, FTSH, EHF, SHF PINS PER ROW FFTP FMTP Mates with: FLE*, SFMC* END ASSEMBLY Insulator Material: PBT Contact (FFTP): BeCu Terminal (FMTP): Phosphor Bronze Plating (FFTP): 10µ" (0,25 µm) Au over 50µ" (1,27 µm) Ni on contact area; Sn over 50µ" (1,27 µm) Ni on balance Plating (FMTP): Sn over 50µ" (1,27 µm) Ni Wire: 30 AWG 7/38, Tinned, Twisted Pair with PVC insulator Operating Temp Range: -40°C to +105°C Lead Size Accepted: (0,41 mm) .016" SQ Contact Resistance: 15 mΩ Insertion Depth (FFTP): (2,64 mm) .104" to (3,17 mm) .125" Insertion Force (FFTP): (Single contact only) 5 oz (1,39 N) avg. Withdrawal Force (FFTP): (Single contact only) 3 oz (0,83 N) avg. RoHS Compliant: Yes –05, –08, –10, –13, –17, –20, –25 N OPTION = Double End –03.85 –N = (97,79 mm) 3.85" = Notch Polarization (Standard) = Reverse Connector (Standard sizes) –08.77 –18.00 = (457,20 mm) 18.00" (1,90) .075 No. of positions x (1,27) .050 + (4,19) .165 (Standard Lengths) –R FFTP (1,02) .040 (3,05) .120 Rated @ 7dB Insertion Loss Cable Length –SE 3.85" (97,8 mm) 2.0 GHz / 4.00 Gbps Performance data for other cable lengths and complete test data available at www.samtec.com?FFTP or contact [email protected] (5,08) .200 –D FMTP PINS PER ROW END ASSEMBLY ASSEMBLY LENGTH –D –03.85 –05, –08, –10, –13, –17, –20, –25 = Double End = (97,79 mm) 3.85" (Standard sizes) = Transfer End –T –08.77 = (222,76 mm) 8.77" ALSO AVAILABLE No. of positions x (1,27) .050 + (4,19) .165 • Other sizes • Other cable lengths Contact Samtec. TRANSFER OPTION 01 = (457,20 mm) 18.00" (Standard Lengths) (3,05) .120 (5,08) .200 –R –D (1,27) .050 OPTION –R Leave blank for –D End Assembly. For –T End Assembly Specify “–N” (Socket has notch polarization) –18.00 ASSEMBLY LENGTH (MOQ Required) *Note: Standard FMTP callout will not mate with FLE, SFMC. Must use gold plated callouts. (See drawing on web.) When mated with a socket, Wire 1 mates with Pin 2; Wire 2 mates wth Pin 1, etc. –R = (222,76 mm) 8.77" ASSEMBLY LENGTH RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality 01 –D SPECIFICATIONS For complete specifications see www.samtec.com?FFTP or www.samtec.com?FMTP ASSEMBLY LENGTH (3,07) .121 (0,41) .016 SQ Note: This Series is non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. –T = Reverse Connector