High Speed Characterization Report Series: Q-Pair QMS-DP/QFS-DP Micro High Speed Series Description: 0.635mm (.0250”) Pitch, 16mm (0.630”) Stack Height Frequency Domain Data Summary Table 1 - Differential Pair Signaling System Performance Test Parameter Insertion Loss Return Loss Near-End Crosstalk Far-End Crosstalk Source port1=QFS_J6_8; port2=QMS_J6_8 port1=QFS_J6_8; port2=QMS_J6_8 QFS J6_8 Victim QFS J10_12 -22dB @ 5.4 GHz QFS J9_11 QFS J10_12 -32dB @ 5.4 GHz QFS J6_8 QMS J10_12 -25dB @ 5.4 GHz QFS J9_11 QMS J10_12 -22dB @ 5.4 GHz -3dB @ 5.4 GHz -3dB @ 5.4 GHz Pin Map (reference Appendix C for full description of test boards) Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Page:2 Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 10/12/2007 All Rights Reserved High Speed Characterization Report Series: Q-Pair QMS-DP/QFS-DP Micro High Speed Series Description: 0.635mm (.0250”) Pitch, 16mm (0.630”) Stack Height Bandwidth Chart – Q-Pair DP & Standard Differential Insertion Loss Insertion Loss (dB) PCB/Connector Test System Standard Differential & Q Pair DP Application QFS/QMS 16mm Stack Height 1 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 QPR_IL_16 DP2_IL_16 0 1 2 3 4 5 6 Frequency (GHz) Pin Map (reference Appendix C for full description of test boards) Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Page:3 Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 10/12/2007 All Rights Reserved