DFN(PLP) 1612-4

PACKAGE INFORMATION
•
PE-DFN(PLP)1612-4-101014
DFN(PLP)1612-4
Unit: mm
PACKAGE DIMENSIONS
1.0±0.1
1.2
0.6
B
3
4
2
1
1.6
0.7±0.1
0.2±0.1
A
×4
0.05
S
0.6Max.
0.05Min.
INDEX
0.3±0.1
0.05 M AB
Bottom View
) Tab in the
parts have VDD or GND level.
(They are connected to the back side of the IC.)
Do not connect to other wires or land patterns.
0.05 S
2.0±0.05
1.8
3.5±0.05
0.2±0.1
8.0±0.3
4.0±0.1
1.5 +0.1
0
1.75±0.1
TAPING SPECIFICATION
0.5±0.1
4.0±0.1
1.2Max.
1.45
TR
User Direction of Feed
TAPING REEL DIMENSIONS
(1reel=5,000pcs)
REUSE REEL (EIAJ-RRM-08Bc)
11.4±1.0
21±0.8
0
∅ 180 −1.5
∅ 60 +1
0
2±0.5
∅13±0.2
9.0±0.3
PACKAGE INFORMATION
PE-DFN(PLP)1612-4-101014
POWER DISSIPATION (DFN(PLP)1612-4)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.
This specification is based on the measurement at the condition below:
Measurement Conditions
Standard Land Pattern
Environment
Mounting on Board (Wind velocity=0m/s)
Board Material
Glass cloth epoxy plastic (Double sided)
Board Dimensions
40mm × 40mm × 1.6mm
Copper Ratio
Top side : Approx. 50% , Back side : Approx. 50%
Through-holes
φ0.54mm × 24pcs
Measurement Results
(Topt=25°C, Tjmax=125°C)
Standard Land Pattern
Power Dissipation
610mW
θja=(125−25°C)/0.61W=164°C/W
Thermal Resistance
762
800
40
700
600
610
500
400
40
300
200
100
0
0
25
85
50
75
100
Ambient Temperature (°C)
125
150
Measurement Board Pattern
Power Dissipation
Operating Estimated
years∗
time
9 years
RP101Kxx1 13,000hrs
Product Name
RP100K
∗The volume is calculated on the supposition that
operating four hours/day.
(Unit: mm)
RECOMMENDED LAND PATTERN
0.6
0.45
0.35
0.7
The above graph shows the Power Dissipation of the
package based on Tjmax=125°C and Tjmax=150°C.
Operating the IC in the shaded area in the graph might
have an influence it's lifetime.
Operating time must be within the time limit described in
the table below, in case of operating in the shaded area.
IC Mount Area
1.0
2.1
Power Dissipation PD (mW)
θjc=48°C/W
(Unit: mm)