PACKAGE INFORMATION • PE-SON-6-101018 SON-6 Unit: mm PACKAGE DIMENSIONS 4 0.85Max. 3 0.13±0.05 1 0.5 0.2±0.1 0.1 6 ∗ 1.34 ∗ 1 3 (0.3) 2.6±0.2 3.0±0.15 4 (0.3) 1.6±0.2 6 Bottom View ) Tab and tab suspension leads in the circle parts have VDD or GND level. (They are connected to the back side of the IC.) Do not connect to other wires or land patterns. 4.0±0.1 3.2 3.5±0.05 2.0±0.05 8.0±0.3 ∅ 1.5+0.1 0 0.2±0.1 1.75±0.1 TAPING SPECIFICATION 1.9 4.0±0.1 1.7Max. ∅1.1±0.1 TR User Direction of Feed TAPING REEL DIMENSIONS REUSE REEL (EIAJ-RRM-08Bc) (1reel=3,000pcs) 2±0.5 21±0.8 +1 60 0 0 180 −1.5 13±0.2 11.4±1.0 9.0±0.3 PACKAGE INFORMATION PE-SON-6-101018 POWER DISSIPATION (SON-6) This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions Standard Land Pattern Environment Mounting on Board (Wind velocity=0m/s) Board Material Glass cloth epoxy plastic (Double sided) Board Dimensions 40mm × 40mm × 1.6mm Copper Ratio Top side : Approx. 50% , Back side : Approx. 50% Through-holes φ0.5mm × 44pcs Measurement Results (Topt=25°C,Tjmax=125°C) Standard Land Pattern Free Air Power Dissipation 500mW 250mW Thermal Resistance θja=(125−25°C)/0.5W=200°C/W − 700 40 600 On Board 500 400 300 Free Air 250 40 Power Dissipation PD (mW) 625 200 100 0 0 25 85 50 75 100 Ambient Temperature (°C) 125 150 Measurement Board Pattern IC Mount Area Power Dissipation The above graph shows the Power Dissipation of the package based on Tjmax=125°C and Tjmax=150°C. (Unit: mm) RECOMMENDED LAND PATTERN 0.25 0.5 influence it's lifetime. Operating time must be within the time limit described in the table below, in case of operating in the shaded area. Product Name R1163D R1131Dxx1 Operating time Estimated years∗ 9,000hrs 6years ∗The volume is calculated on the supposition that operating four hours/day. 1.05 0.75 Operating the IC in the shaded area in the graph might have an (Unit: mm)