LB115_Data Sheet - SL Power Electronics

LB115S
115W Single Output
LED Series
Features
Small size of 2” x 4” x 1.3”
75W convection cooled/115 Watts with 200 LFM
Universal Input 90-264Vac
Meets EN55015 Conducted EMI
Meets IEC61000-3-2 Class C for less than 1 Watt to full
power
Approved to UL/CSA/IEC/EN60950-1, 2nd Edition
Level V Efficiency Compliant
-40˚C start up
-20˚C to 70˚C Operating temperature Range
3 Year Warranty
Optional LED indicator for power-on
Description
The LB115S LED Series provide a reliable power source with high power density in 2” x 4” x 1.3” package.
Fully compliant to the applicable safety and Global Lighting EMC standards, these models will allow easy
integration into many Lighting fixtures and other industrial applications. All 4 models are CE marked to low
voltage directive and approved to standards of UL/CSA/IEC/EN60950-1 2nd edition.
Model Selection
Model
Output Current
Number
LB115S12K
Volts
12 V
Convection Cooled
6.25 A
LB115S24K
24 V
3.13A
LB115S48K
48 V
1.56A
LB115S56K
56 V
1.34A
Output Current
Forced air(200 LFM)
(Total Power)
9.00A
(108 Watts)
4.58A
(110 Watts)
2.40A
(115 Watts)
2.05A
(115 Watts)
Ripple &
Total
OVP
Noise*
0.5%RMS,
1.5% pk-pk
0.5%RMS,
1% pk-pk
0.5%RMS,
1% pk-pk
0.5%RMS,
1% pk-pk
Regulation
±2%
Threshold
14.0 ± 1.1V
±2%
28.0 ± 2.5V
±2%
55.0 ± 4.0V
±2%
63.0 ± 4.0V
Notes:
* At -20C, the noise and ripple is 2% of the output.
General & Input Specifications
PARAMETER
SPECIFICATION
AC Input Voltage:
90-264Vac, single phase
AC Input Frequency:
47-63Hz
AC Input Current:
115Vac: 2A, 230Vac: 1A
Inrush Current:
65A maximum @ 25C
Earth Leakage Current
(Input–Earth):
<[email protected], 60 Hz input, NC
Input Fuse:
F1:4A, 250VAC
www.slpower.com
LB115S 2-OCT-14
NOTES
Fuse provided on all models
1
LB115S
115W Single Output
LED Series
Efficiency
Typical
Measured @ 25˚C
LB115S12K
89% @230V ac, full load
86.5%@115V ac, full load
LB115S24K
89% @230V ac, full load
87%@115V ac, full load
LB115S48K
90% @230V ac, full load
88%@115V ac, full load
LB115S56K
90% @230V ac, full load
88%@115V ac, full load
Operating Temperature
-20˚C to 70˚C
-40˚C start up (full load)
For 12V output, the maximum load is 75%
Storage Temperature
-40˚C to 85˚C
Turn-on Time:
<2 Seconds @115Vac(<3S for 12V
output)
Hold-up Time:
12mS minimum from loss of ac input at
115 Vac
<5 Seconds @115Vac for -20˚C ambient
DC Output Specifications
PARAMETER
SPECIFICATION
NOTES
Max of 75 Watts for Convection cooled
Output Power:
Cooling:
Max of 115 Watts for fan cooled
(48 & 56V Models)
Maximum 108 Watts for 12V output
-20 to 50˚C ambient
Convection
Forced Air of 200 LFM
Total Regulation:
±2% for all models
Total regulation is the maximum deviation from
nominal voltage for all loading conditions
Overload Protection:
120% - 180% of rated output current
value, Hiccup Mode
For 12V output, it is 110 to 180%
Short Circuit
Protection:
Short across the output terminals will not
cause damage to the unit. Hiccup Mode
Overvoltage
Protection:
OVP firing reduces output voltage to
<50% of nominal in <50mS. See chart for
trip range
Overtemperature
Protection:
Automatic Power Shutdown
Minimum Load:
No minimum load is required
Ripple and Noise:
0.5% RMS, 1% pk-pk for all models.
Thermistor temperature is 130˚C
20 MHz Bandwidth, differential mode.
Measured with noise probe directly across
output terminals, and load terminated with
0.1µF ceramic and 10µF low ESR capacitors
Transient Response:
500µs typ. response time for return to
within 0.5% of final value for a 50% load
change, ∆i/∆t< 0.2A/µs. Max. voltage
deviation is 3.5%.
Measured @ 25˚C
Overshoot:
5% overshoot at turn-on, 5% overshoot at
turn-off, under all conditions.
6% for 12V output
www.slpower.com
LB115S 2-OCT-14
2
LB115S
115W Single Output
LED Series
Safety Standard Compliance
Agency
CONDITIONS
nd
Edition
EN/CSA/UL/IEC 60950-1, 2
UL
nd
CSA
CSA 60950-1, 2
Demko
EN 60950-1, 2nd
CB Report
IEC 60950-1, 2nd
Double/Reinforced between Input and Output
Isolation Type:
Isolation Specifications
PARAMETER
CONDITIONS
Insulation Safety
Rating:
Input to Ground
Electric Strength Test
Voltage:
Rating
NOTES
Basic Insulation
Input to Output
Double/Reinforced
Input to Ground
1900Vac
Input to Output
3000Vac
Output to Ground
500Vac
.
Environmental Specifications
PARAMETER
Operating
Temperature:
Temperature Derating:
Cooling:
Storage Temperature:
Altitude:
Relative Humidity:
Shock:
Vibration:
SPECIFICATION
NOTES
-20°C to +70°C
-40°C Startup guaranteed
60% derating at 70°C
Convection/ Airflow
-40°C to +85°C
Operating: -500 to 3,000 meter
Non-operating: -500 to 40,000 ft.
5% to 95%, non-condensing
Non-Operating: Half-sine, 40 gpk, 10mS, 3 axes, 6
shocks total
Random vibration per MIL-STD-810E, Method
514.4, Cat. 1, Figure 514.4-1, 1 hr in each of three
axes
75 Watts convection
Reliability Specifications
PARAMETER
SPECIFICATION
NOTES
MTBF:
574K hours, 25°C ambient, full load
Calculation is done based on
Telcordia. Reports for each
model is available
Warranty:
3 Years
Limited
HALT Data:
Per SL Power Halt procedure
Report is available
www.slpower.com
LB115S 2-OCT-14
3
LB115S
115W Single Output
LED Series
EMI/EMC Compliance
PARAMETER
SPECIFICATION
NOTES
Conducted Emissions:
EN55011/22 Class B; FCC Part 15
Also meets EN55015 Class B
Radiated Emissions:
EN55011/22 Class A; FCC Part 15
Harmonic Current
Emissions
EN61000-3-2, Class A,B,C &D
Voltage Fluctuations &
Flicker
EN61000-3-3
Static Discharge
Immunity:
EN61000-4-2, Level 4: 6kV contact, 8kV air,
Criteria A
RF Field Susceptibility
EN61000-4-3, Level 3 (3V/m), Criteria A
Fast Transients/Bursts
Surge susceptibility
Conducted RF
susceptibility
Power Frequency
Magnetic Field Test
Voltage Sags & Surges
EN61000-4-4, Level 3 (PS: 2kV-40A, other
lines 1kV-20A), Criteria A
EN61000-4-5, Installation Class 3 (1kV diff.
mode, 2kV common mode), Criteria A
EN61000-4-6, Level 3 (3Vrms), Criteria A
Meets class C from 5 to 115 Watts.
This is based on limits set @ 115 Watt
Performance criteria are defined as
following:
A – Normal performance
during and after the test
B – Temporary degradation,
self-recoverable
C – Temporary degradation,
operator intervention required
to recover the operation
EN61000-4-8, Level 3 (3A/m), Criteria A
EN61000-4-11,
95% dip/0.5 cycle (Criteria A),
60%/5cycles (Criteria B ), 30%/25 cycles
(Criteria A).
loading is 70% of 100 watts with 100 Vac
input.
Notes:
1. Specifications subject to change without notice.
2. Specifications are for convection rating at factory settings with 115Vac input and 25°C ambient unless
otherwise stated.
www.slpower.com
LB115S 2-OCT-14
4
LB115S
115W Single Output
LED Series
Mechanical Drawing
Connector Information
Input Connector
J2
PIN 1) AC NEUTRAL
PIN 2) EMPTY
PIN 3) AC LINE
Mating Connector:
Tyco/AMP 640250-3
Terminals :
3-640252-1
DC Output
Connector
J3
PIN 1) +Vout
PIN 2) +Vout
PIN 3) +Vout
PIN 4) -Vout
PIN 5) -Vout
PIN 6) -Vout
Mating Connector:
AMP 640250-6
Terminals :
3-640252-1
Ground
(FG)J1
19-30258-0187 (Keystone 1285)
(Zierick 895)(.187*0.020)
Mating Connector
Molex 190020005
1. All dimensions in inches (mm) undefined tolerance is ±.02” (0.5mm).
2. Mounting holes should be connected together for EMI purpose
3. FG is safety ground connection
4. This power supply requires mounting on metal standoffs 0.20” (5mm) Min. in height
www.slpower.com
LB115S 2-OCT-14
5
LB115S
115W Single Output
LED Series
Characteristic Curves
Output Power vs. Temperature
Efficiency vs. Loading
www.slpower.com
LB115S 2-OCT-14
6
LB115S
115W Single Output
LED Series
Ripple & Noise
To verify that the output ripple and noise does not exceed the level specified in the product specification, measured using a scope probe socket with
0.1uF ceramic and a 10uF electrolytic capacitor connected in parallel across it, 20MHz BW.
Output Overload Characteristic
Overvoltage Protection
www.slpower.com
LB115S 2-OCT-14
7
LB115S
115W Single Output
LED Series
Turn On Time
Hold Up Time
CH1:
Vout
CH3:
Vin
Min_Limit:
16
Vin:
115
Vac
Iout:
2.40
Amps
Meas:
23.2
mS
Data Sheet © 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for
consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
www.slpower.com
LB115S 2-OCT-14
8