Issue Date:
2011-03-18
Page 1 of 11
Report Reference #
E300305-A58-UL
UL TEST REPORT AND PROCEDURE
Standard:
Certification Type:
CCN:
UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology
Equipment - Safety - Part 1: General Requirements)
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information
Technology Equipment - Safety - Part 1: General Requirements)
Listing
QQGQ, QQGQ7 (Power Supplies for Information Technology
Equipment Including Electrical Business Equipment)
Switching Power Supply
1.BP(a)*040(b)*(c)**(d)*(e)**
2.(a)*ENB1040(b)*(c)**(d)**(e)*(f)**
(Where * may be alphanumeric, for marketing purpose and no impact
safety related critical components and constructions)
Input Rating: 100-240Vac, 50-60Hz, 1.2A
Output Rating: 5Vdc, 5.0A or
9Vdc, 4.0A or
12Vdc, 3.4A or
15Vdc, 2.7A or
18Vdc, 2.2A or
24Vdc, 1.7A or
48Vdc, 0.83A
Product:
Model:
Rating:
Applicant Name and Address:
BRIDGEPOWER CORP
964 GOSAEK-DONG
GWONSEON-GU
SUWON-SI GYEONGGI-DO 441-813 KOREA
This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the
above referenced Standards. The products have been found to comply with the requirements covering the category and the products are
judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on
such products which comply with this Test Report and any other applicable requirements of Underwriters Laboratories Inc. ('UL') in
accordance with the Follow-Up Service Agreement. Only those products which properly bear the UL Mark are considered as being
covered by UL's Follow-Up Service under the indicated Test Procedure.
The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety.
Any information and documentation involving UL Mark services are provided on behalf of Underwriters Laboratories Inc. (UL) or any
authorized licensee of UL.
Prepared by:
Reviewed by:
In-Young Hwang
Underwriters Laboratories Inc.
Hyeong-Kyun Park
Underwriters Laboratories Inc.
Copyright © 2011
Issue Date:
2011-03-18
Page 2 of 11
Report Reference #
E300305-A58-UL
Supporting Documentation
The following documents located at the beginning of this Procedure supplement the requirements of this Test
Report:
A. Authorization - The Authorization page may include additional Factory Identification Code markings.
B. Generic Inspection Instructions i. Part AC details important information which may be applicable to products covered by this Procedure.
Products described in this Test Report must comply with any applicable items listed unless otherwise
stated in the body of this Test Report.
ii. Part AE details any requirements which may be applicable to all products covered by this Procedure.
Products described in this Test Report must comply with any applicable items listed unless otherwise
stated in the body of each Test Report.
iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical
standard used to investigate these products. Products are permitted to bear only the Certification
Mark(s) corresponding to the countries for which it is certified, as indicated in each Test Report.
Product Description
Switching Mode Power Supply(AC/DC adaptor), consists of electronic components mounted on PWB, a
switching transformer and electronic components mounted on PWB, housed with a plastic enclosure.
Model Differences
BP(a)*040(b)*(c)**(d)*(e)**
(a) Family Related Designs: * is A-Z
(b) Output: * is S (S=Single)
(c) Output Voltage: 05, 09, 12, 15, 18, 24, 48
(d) Standard Input Cord Options can be F or Q or N for input plug type.
F : (Class I - IEC320-C14),
Q: (Class II - IEC320-C18),
N: ((Class II - IEC320-C8)
(e) Custom Options (Marking, Cord etc.) Number : 00 thru 99
(a)*ENB1040(b)*(c)**(d)**(e)*(f)**
(a) Family Related Designs : * is A-Z
(b) Design Revision Changes: A to Z (Standard)
(c) Output Voltage: 05, 09, 12, 15, 18, 24, 48
(d) Standards Output Cord Options: Number : 00 thru 99
(e) Standard Input Cord Options can be F or Q or Nfor input plug type.
F : (Class I = IEC320-C14)
Q: (Class II = IEC320-C18)
N: ((Class II = IEC320-C8)
(f) Custom Options (Marking, Cord etc.) Number : 00 thru 99
Technical Considerations
Equipment mobility : movable
Connection to the mains : pluggable A
Issue Date:
2011-03-18
Page 3 of 11
Report Reference #
E300305-A58-UL
Operating condition : continuous
Access location : operator accessible
Over voltage category (OVC) : OVC II
Mains supply tolerance (%) or absolute mains supply values : +10%, -10%
Tested for IT power systems : No
IT testing, phase-phase voltage (V) : N/A
Class of equipment : Class I (earthed) or Class II (double insulated)
Considered current rating (A) : 20A
Pollution degree (PD) : PD 2
IP protection class : IP X0
Altitude of operation (m) : Up to 2000m
Altitude of test laboratory (m) : Less than 2000m
Mass of equipment (kg) : 240g
The product was submitted and evaluated for use at the maximum ambient temperature (Tma)
permitted by the manufacturer’s specification of: 40 °C
The means of connection to the mains supply is: Detachable power cord, Pluggable A
The product is intended for use on the following power systems: TN
The equipment disconnect device is considered to be: Appliance inlet
The following accessible locations (with circuit/schematic designation) are within a limited current
circuit: CY2
The following circuit locations (with circuit/schematic designation) were investigated as a limited
power source (LPS): All outputs
Additional Information
Issue Date:
2011-03-18
Page 4 of 11
Report Reference #
E300305-A58-UL
Original, 11CA06784
Max. Normal Load Condition: Rated output current (See Cover Page for detail).
Additional Standards
The product fulfills the requirements of: N/A
Markings and instructions
Clause Title
Marking or Instruction Details
Power rating - Ratings
Ratings (voltage, frequency/dc, current)
Power rating Company identification
Power rating -
Listee's or Recognized company's name, Trade Name, Trademark or File
Number
Model Number
Model
Power rating Class II symbol
Symbol for Class II construction
(60417-2-IEC-5172)
Warning to service
personnel
"CAUTION: Double pole/neutral fusing"
Special Instructions to UL Representative
Inspect the transformer(s) listed in BD1.1 per AA 1.1-(C).
When the tests are conducted at other location, inspect test record and specification sheet provided by the
component manufacturer.
Verify the specification sheet indicates 100% routine test specified in BD 1.1 be conducted at the component
manufacturer.
Issue Date:
2011-03-18
Page 5 of 11
Report Reference #
E300305-A58-UL
Production-Line Testing Requirements
Electric Strength Test Special Constructions - Refer to Generic Inspection Instructions, Part AC for
further information.
Model
Component
Removable
Parts
Test probe location
BP(a)*040(b)
*(c)**(d)*(e)*
*,
(a)*ENB1040
(b)*(c)**(d)**(
e)*(f)**
T1
N/A
N/A
V
rms
300
0
V dc
Test Time,
s
4242
1s
Earthing Continuity Test Exemptions - This test is not required for the following models:
Class II model only
Electric Strength Test Exemptions - This test is not required for the following models:
Electric Strength Test Component Exemptions - The following solid-state components may
disconnected from the remainder of the circuitry during the performance of this test:
Sample and Test Specifics for Follow-Up Tests at UL
Model
N/A
Component
Material
Test
Sample(s)
Test
Specifics
Issue Date:
2011-03-18
Page 6 of 11
Report Reference #
E300305-A58-UL
TABLE: List of Critical Components
Object/part or
Description
Manufacturer/
trademark
Appliance Inlet (Class I)
Rong Feng Industrial
Co., Ltd.
Appliance Inlet (Class II) Rong Feng Industrial
Co., Ltd.
Appliance Inlet (Class II) Rong Feng Industrial
- Alternate
Co., Ltd.
Enclosure(Fire/Mech./El CHEIL INDUSTRIES.
ec.)
Fuse (F1)
Fuse (F1)
- Alternate
Fuse (F1)
- Alternate
Fuse (F1)
- Alternate
Fuse (F2) (Optional)
Fuse (F2) (Optional)
- Alternate
Fuse (F2) (Optional)
- Alternate
Fuse (F2)
- Alternate
Varistor (ZNR4)
(Optional)
Varistor (ZNR4)
(Optional) - Alternate
Varistor (ZNR4)
(Optional) - Alternate
Thermistor (TH1)
Line Filter (LF1)
type/model
technical data
CCN
Marks of
Conformity
SS-120
Rated 15 A / 250 V.
AXUT2/8
USR/CNR
RF-180
Rated 2.5 A / 250 V.
AXUT2/9
USR/CNR
SS-120A
Rated 15 A / 250 V.
AXUT2/8
USR/CNR
HN-1064W(+)
Overall Sized approx. 102.0 by 60.0 by 32.5mm.
Min 2.0mm thickness, V-1, RTI 80 degree C.
Composed of two pieces, secured together by
ultrasonic welding.
Rated 250V, T3.15AL
Rated 250V, T3.15AL
QMFZ2/8
USR/CNR
JDYX2/8
JDYX2/8
USR/CNR
USR/CNR
Rated 250V, T3.15AL
JDYX2/8
USR/CNR
Save fusetech Inc
SS-5
LITTELFUSE
392
WICKMANN WERKE
Hollyland co., ltd.
5ET
NIPPON SEISEN
CABLE, LTD.
Save fusetech Inc
LITTELFUSE
WICKMANN WERKE
Hollyland co., ltd.
SLT
Rated 250V, T3.15AL
JDYX2/8
USR/CNR
SS-5
392
Rated 250V, T3.15AL
Rated 250V, T3.15AL
JDYX2/8
JDYX2/8
USR/CNR
USR/CNR
5ET
Rated 250V, T3.15AL
JDYX2/8
USR/CNR
NIPPON SEISEN
CABLE, LTD.
Success Electronics
SLT
Rated 250V, T3.15AL
JDYX2/8
USR/CNR
SVR14D471K
VZCA2/8
USR/CNR
AMOTECH CO LTD
INR14D471
Rated 470 V, (line-to-line), Overall dimension 14
mm.
Rated 470 V, (line-to-line), Overall dimension 14
mm.
Rated 470 V, (line-to-line), Overall dimension 14
mm.
NTC, 5ohm at 25deg.C
Ferrite Core; 14mm by 8mm by 7mm,Coils:
Polyurethane Enamelled Wire Min.130degree C.
Bobbin: (QMFZ2) Bakelite, type PM9820@, V-0,
VZCA2
USR
VZCA2
USR
XGPU2
-
USR
-
HONGZHI
HEL14D471K
ENTERPRISES LTD
Various
Various
Bridgepower or
3025634
Wendeng Jeil
Issue Date:
2011-03-18
Page 7 of 11
Report Reference #
Object/part or
Description
Manufacturer/
trademark
type/model
X-capacitor (CX1) (Line
to Line) - Alternate
X-capacitor (CX1) (Line
to Line) - Alternate
X-capacitor (CX1) (Line
to Line) - Alternate
X-capacitor (CX1) (Line
to Line) - Alternate
X-capacitor (CX1) (Line
to Line) - Alternate
BridgeDiode(BD1)
Discharging Resister
(PR1, PR2)
Electrolytic Capacitor
(C1)
Switching IC (U1)
FET (Q1)
Main Transformer(T1)
for output 5 V
Iskra
Okaya
KNB 1530 or
1562 or 1563
PCX2 335M or
PCX2 337
LE
Sunil
436D
Tenta
MEX
Various
Various
E300305-A58-UL
technical data
CCN
Marks of
Conformity
FOWX2
USR/CNR
FOWX2
USR/CNR
FOWX2
USR/CNR
FOWX2
USR/CNR
FOWX2
USR/CNR
Various
Various
150 deg C
Rated 250V, Max.. 0.47 uF. Marked with X1 or X2.
Meets IEC/EN60384-14.
Rated 250V, Max.. 0.47 uF. Marked with X1 or X2.
Meets IEC/EN60384-14.
Rated 250V, Max.. 0.47 uF. Marked with X1 or X2.
Meets IEC/EN60384-14.
Rated 250V, Max.. 0.47 uF. Marked with X1 or X2.
Meets IEC/EN60384-14.
Rated 250V, Max.. 0.47 uF. Marked with X1 or X2.
Meets IEC/EN60384-14.
Min. 4.0A, Min. 600V.
510Kohm 1/8W
FOWX2
-
USR/CNR
-
Various
Various
Max. 82 uF, Min. 400 V, min. 105 degree.
-
-
Various
Various
Bridgepower or
Wendeng Jeil
Various
Various
3025688001
-
-
Main Transformer(T1)
for output 9V
Bridgepower or
Wendeng Jeil
3025688002
-
-
Main Transformer(T1)
for output 12 V
Bridgepower or
Wendeng Jeil
3025688003
-
-
Main Transformer(T1)
for output 15V
Bridgepower or
Wendeng Jeil
3025688004
-
-
Main Transformer(T1)
for output 18 V
Bridgepower or
Wendeng Jeil
3025688005
-
-
Main Transformer(T1)
for output 24 V
Bridgepower or
Wendeng Jeil
3025688006
Max 30V, Max.4mA
Min 650V, Max.7.2A
JEC(B), Class B. Core: Ferrite, size 28 by 20 mm.
Coils: TIW:Furukawa, TEXE, 130 deg
C.Bobbin:(QMFZ2), V-0, 130 degC.
JEC(B), Class B. Core: Ferrite, size 28 by 20 mm.
Coils: TIW:Furukawa, TEXE, 130 deg
C.Bobbin:(QMFZ2), V-0, 130 degC.
JEC(B), Class B. Core: Ferrite, size 28 by 20 mm.
Coils: TIW:Furukawa, TEXE, 130 deg
C.Bobbin:(QMFZ2), V-0, 130 degC.
JEC(B), Class B. Core: Ferrite, size 28 by 20 mm.
Coils: TIW:Furukawa, TEXE, 130 deg
C.Bobbin:(QMFZ2), V-0, 130 degC.
JEC(B), Class B. Core: Ferrite, size 28 by 20 mm.
Coils: TIW:Furukawa, TEXE, 130 deg
C.Bobbin:(QMFZ2), V-0, 130 degC.
JEC(B), Class B. Core: Ferrite, size 28 by 20 mm.
Coils: TIW:Furukawa, TEXE, 130 deg
-
-
Pilkor
Issue Date:
2011-03-18
Page 8 of 11
Object/part or
Description
Manufacturer/
trademark
Main Transformer(T1)
for output 48 V
Bridgepower or
Wendeng Jeil
Optical Isolator (U2)
Vishay
Semiconductor
Optical isolator (U2) Alternate
COSMO
ELECTRONICS
CORP
Optical isolator (U2) Alternate
SHARP CORP
ELECTRONIC
COMPONENTS
GROUP
LITE-ON
TECHNOLOGY
CORP
Optical isolator (U2) Alternat
Optical isolator (U2) Alternate
KODENSHI KOREA
Bridging Capacitor (CY1, SUCCESS
CY2)
ELECTRONICS CO
LTD
Bridging
Various
Resisitor(R4,R5)
(Optional)
PWB
Various
Heatsink(HS1)-Primary Various
Report Reference #
type/model
E300305-A58-UL
technical data
C.Bobbin:(QMFZ2), V-0, 130 degC.
JEC(B), Class B. Core: Ferrite, size 28 by 20 mm.
Coils: TIW:Furukawa, TEXE, 130 deg
C.Bobbin:(QMFZ2), V-0, 130 degC.
TCET1103(G)D or Double protection optical isolator. Providing
TCET1103
isolation voltage 5000 Vac, Internal Creepage ;
8.0mm
External Creepage ; 6.0mm
KP1010X
Double protection optical isolator. Providing
isolation voltage 5000 Vac,Internal Creepage ;
6.5mm
External Creepage ; 6.5mm
PC123
Double protection optical isolator. Providing
isolation voltage 5000 Vac,Internal Creepage ;
6.4mm
External Creepage ; 6.4mm
LTV-817
Double protection optical isolator. Providing
isolation voltage 5000 Vac,Internal Creepage ;
7.0mm
External Creepage ; 7.0mm
PC-17K
Double protection optical isolator. Providing
isolation voltage 5000 Vac.,Internal Creepage ;
7.0mm
External Creepage ; 7.0mm
SE & CB
250Vmin, 1000 pF. Marked with Y1 & Y2.
3025688007
CCN
Marks of
Conformity
-
-
-
-
FPQU2/8
USR/CNR
FPQU2/8
USR/CNR
FPQU2
US
FPQU2/8
USR/CNR
FPQU2/8
USR/CNR
Various
4.7M Ohm, 1/4W
-
-
Various
Various
Min. V-1, min 130°C.
Metal, overall sized approx.
54 by 22 mm,
2 mm thickness.
Wound by polyester film
tape OANZ2), Min. 130 deg C,
ZPMV2
-
USR
-
Issue Date:
2011-03-18
Page 9 of 11
Report Reference #
E300305-A58-UL
Object/part or
Description
Manufacturer/
trademark
type/model
technical data
CCN
Marks of
Conformity
Heatsink(HS2)Secondary
Various
Various
-
-
Output cable(LPS)
Various
Various
AVLV2 or ZJCZ
USR
Nameplate Label
Various
Various
PGDQ2, PGJI2
USR
Bonding Glue
Various
Various
QMFZ2
USR
Wiring, internal (Primary) Various
Various
AVLV2
USR
Bonding conductor
Various
Metal, overall sized approx.
35 by 22 mm,
2 mm thickness.
Wound by polyester film
tape OANZ2), Min. 130 deg C,
For use of external interconnection, max 3.05 m
long, max. 300 V, 80 °C, min.20 AWG, Marked with
VW-1 or FT-1.
Suitable for use on surface of Polycarbonate (PC)
with max. 60 °C surface temperature.
Min. V-2, min. 100 °C for additional secureness of
internal conductor.
Max. 300 V, 80 °C, min.20 AWG, Marked with VW1 or FT-1.
Mechanically clamped or secured on PWB from
Appliance Inlet. Min 18 AWG, Green-and-Yellow
Insulation.
AVLV2
USR
Various
Issue Date:
2011-03-18
Page 10 of 11
Report Reference #
Enclosures
Type
Supplement Id
Description
Photographs
3-13
External View F type (Class I)
Photographs
3-17
External View N type (Class II)
Photographs
3-23
External View Q type (Class I)
Photographs
3-29
Internal View Top_ClassI
Photographs
3-30
Internal View Bottom_ClassI
Photographs
3-31
Internal View Top_ClassII
Photographs
3-32
Internal View Bottom_ClassII
Diagrams
4-01
Component Layout_ PWB Pattern
Miscellaneous
7-01
Label Drawing_ClassI
Miscellaneous
7-18
Label Drawing_ClassII
Schematics + PWB
Manuals
E300305-A58-UL