Schottky Barrier Diode Datasheet RB060M-60 Application Dimensions (Unit : mm) General rectification Land size figure (Unit : mm) 0.1±0.1 0.05 1.2 0.85 1.6±0.1 ① 2.6±0.1 1) Small power mold type. (PMDU) 3.5±0.2 3.05 Features PMDU 2) Low IR. 3) High reliability. Structure 0.9±0.1 0.8±0.1 Construction Silicon epitaxial ROHM : PMDU JEDEC :SOD-123 Manufacture Date Taping specifications (Unit : mm) 4.0±0.1 1.81±0.1 8.0±0.2 3.71±0.1 0.25±0.05 1.75±0.1 φ1.55±0.05 2.0±0.05 3.5±0.05 4.0±0.1 φ1.0±0.1 1.5MAX Absolute maximum ratings (Ta = 25°C) Symbol Limits Unit Reverse voltage (repetitive) VRM 60 V Reverse voltage (DC) VR 60 V Average rectified forward current (*1) Io 2 A IFSM 30 A Junction temperature Tj 150 °C Storage temperature Tstg 40 to 150 °C Parameter Forward current surge peak (60Hz·1cyc) (*1)Mounted on epoxy board. Tc=55°C max. Electrical characteristics (Ta = 25°C) Parameter Forward voltage Reverse current www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. Conditions Symbol Min. Typ. Max. Unit VF1 - - 0.52 V IF=1.0A VF2 - - 0.61 V IF=2.0A IR - - 50 A VR=60V 1/4 2013.02 - Rev.B Data Sheet RB060M-60 100000 10000 Ta = 150°C Ta = 150°C Ta = 125°C 1000 REVERSE CURRENT : IR(A) FORWARD CURRENT : IF(mA) 10000 Ta = 75°C 100 10 Ta = 25°C 1 1000 Ta = 125°C 100 Ta = 75°C 10 1 Ta = 25°C 0.1 Ta = 25°C 0.01 0.1 Ta = 25°C 0.001 0 0.2 0.4 0.6 0.8 0 FORWARD VOLTAGE : VF(V) VF-IF CHARACTERISTICS 10 20 30 40 50 60 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS 1000 700 f = 1MHz IF=2A FORWARD VOLTAGE : VF(mV) CAPACITANCE BETWEEN TERMINALS : Ct(pF) 650 100 600 AVE : 541.0mV 550 500 450 400 10 0 5 10 15 20 25 30 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS VF DISPERSION MAP 50 320 40 310 30 20 f=1MHz VR=0V 315 AVE : 9.367A CAPACITANCE BETWEEN TERMINALS : Ct(pF) REVERSE CURRENT : IR(A) VR=60V 10 305 300 AVE : 294pF 295 290 285 280 275 0 270 Ct DISPERSION MAP IR DISPERSION MAP www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 2/4 2013.02 - Rev.B Data Sheet RB060M-60 30 185 PEAK SURGE FORWARD CURRENT : IFSM(A) RESERVE RECOVERY TIME : trr(ns) IF=IR=100mA Irr=0.1IR IFSM 8.3ms 1cyc. 135 85 AVE : 16.55ns σ : 0.51 20 10 0 35 IFSM DISPERSION MAP trr DISPERSION MAP 250 140 PEAK SURGE FORWARD CURRENT : IFSM(A) 8.3ms 8.3ms 100 IFSM 200 PEAK SURGE FORWARD CURRENT : IFSM(A) IFSM 120 1cyc. 80 60 40 time 150 100 50 20 0 0 1 10 1 100 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 TIME : t(ms) IFSM-t CHARACTERISTICS 3 1000 D = 1/2 Rth(j-a) 100 Rth(j-c) 10 FORWARD POWER DISSIPATION : Pf(W) TRANSIENT THAERMAL IMPEDANCE : Rth (°C/W) Mounted on epoxy board 2 Sin(θ=180) DC 1 1 0.1 0.001 0 0.01 0.1 1 10 100 1000 0 TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 3/4 1 2 3 4 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS 5 2013.02 - Rev.B 2 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) 5 1.5 REVERSE POWER DISSIPATION : PR (W) Data Sheet RB060M-60 DC 1 D = 1/2 Sin(θ=180) 0.5 4 DC 3 D = 1/2 2 Sin(θ=180) 1 0 0 0 20 40 0 60 25 50 75 100 125 150 CASE TEMPARATURE : Tc(°C) DERATING CURVE (Io-Tc) REVERSE VOLTAGE : VR(V) VR-PR CHARACTERISTICS 30 No Break at 30kV ELECTROSTATIC DISCHARGE TEST ESD(KV) 25 20 15 AVE : 8.30kV 10 5 0 C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 4/4 2013.02 - Rev.B Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. R1102A