2SCR533P Datasheet Middle Power Transistors (50V / 3A) l Outline Parameter Value VCEO 50V IC 3A SOT-89 SC-62 MPT3 l Features l Inner circuit 1)Low saturation voltage, typically VCE(sat)=350mV(Max.) (IC/IB=1A/50mA) 2)High speed switching l Application LOW FREQUENCY AMPLIFIER, HIGH SPEED SWITCHING l Packaging specifications Part No. Package Package size 2SCR533P SOT-89 (MPT3) 4540 Taping code T100 Basic Reel size Tape width ordering (mm) (mm) unit.(pcs) 180 12 1000 Marking NM www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 1/6 20150731 - Rev.002 2SCR533P Datasheet l Absolute maximum ratings (Ta = 25°C) Parameter Symbol VCBO VCEO VEBO IC ICP*1 PD*2 PD*3 Tj Tstg Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Range of storage temperature Values 50 50 6 3 6 0.5 2.0 150 -55 to +150 Unit V V V A A W W ℃ ℃ l Electrical characteristics (Ta = 25°C) Parameter Symbol Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cut-off current Emitter cut-off current BVCBO BVCEO Collector-emitter saturation voltage DC current gain Transition frequency Output capacitance Min. Values Typ. Max. IC = 100μA 50 - - V IC = 1mA 50 - - V 6 - - 1.0 1.0 V μA μA - 130 350 mV 180 - 450 - - 320 - MHz - 13 - pF - 50 - ns - 450 - ns - 80 - ns Conditions BVEBO ICBO IEBO IE = 100μA VCB = 50V VEB = 4V VCE(sat)*4 IC = 1A, IB = 50mA hFE VCE = 3V, IC = 50mA VCE = 10V, IE = -500mA, f T*4 f = 100MHz VCB = 10V, IE = 0A, Cob f = 1MHz Turn-On time ton Storage time tstg Fall time tf IC = 1.5A, IB1 = 150mA, IB2 = -150mA, VCC ⋍ 10V, RL = 6.8Ω See test circuit Unit *1 Pw=10ms, Single Pulse *2 Each terminal mounted on a reference land. *3 Mounted on a ceramic board.(40×40×0.7mm) *4 Pulsed www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 2/6 20150731 - Rev.002 2SCR533P Datasheet l Electrical characteristic curves(Ta = 25°C) Fig.1 Ground Emitter Propagation Characteristics Fig.2 Typical Output Characteristics Fig.3 DC Current Gain vs. Collector Current (I) Fig.4 DC Current Gain vs. Collector Current (II) www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 3/6 20150731 - Rev.002 2SCR533P Datasheet l Electrical characteristic curves(Ta = 25°C) Fig.5 Collector-Emitter Saturation Voltage vs. Collector Current (I) Fig.6 Collector-Emitter Saturation Voltage vs. Collector Current (II) Fig.7 Base-Emitter Saturation Voltage vs. Collector Current Fig.8 Gain Bandwidth Product vs. Emitter Current www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 4/6 20150731 - Rev.002 2SCR533P Datasheet l Electrical characteristic curves(Ta = 25°C) Fig.9 Emitter Input Capacitance vs. Emitter-Base Voltage Collector Output Capacitance vs. Collector-Base Voltage Fig.10 Safe Operating Area SWITCHING TIME TEST CIRCUIT www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 5/6 20150731 - Rev.002 2SCR533P Datasheet l Dimensions www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 6/6 20150731 - Rev.002