EMT2 / UMT2N / IMT2A Datasheet General purpose transistor (dual transistors) l Outline Parameter VCEO Tr1 and Tr2 -50V IC -150mA EMT6 UMT6 EMT2 SOT-563 UMT2N SOT-363 SMT6 l Features 1) Two 2SA1037AK chips in a EMT, UMT or SMT package. 2) Mounting possible with EMT3, UMT3 or SMT3 automatic mounting machines. 3) Transistor elements are independent, eliminating interference. 4) Mounting cost and area can be cut in half. IMT2A SOT-457 l Inner circuit EMT2 / UMT2N IMT2A l Application GENERAL PURPOSE SMALL SIGNAL AMPLIFIER l Packaging specifications Part No. Package Package size Taping code EMT2 UMT2N IMT2A EMT6 UMT6 SMT6 1616 2021 2928 T2R TR T108 180 180 180 Basic ordering unit.(pcs) Marking 8 8 8 8000 3000 3000 T2 T2 T2 Reel size Tape width (mm) (mm) www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 1/8 20150527 - Rev.004 EMT2 / UMT2N / IMT2A Datasheet l Absolute maximum ratings (Ta = 25°C) <For Tr1 and Tr2 in common> Parameter Symbol Values Unit Collector-base voltage VCBO -60 V Collector-emitter voltage VCEO -50 V Emitter-base voltage VEBO -6 V IC -150 mA EMT2/ UMT2N PD*1 *2 150 mW/Total IMT2A PD*1 *3 300 mW/Total Tj 150 ℃ Tstg -55 to +150 ℃ Collector current Power dissipation Junction temperature Range of storage temperature l Electrical characteristics (Ta = 25°C) <For Tr1 and Tr2 in common> Parameter Symbol Collector-base breakdown voltage BVCBO Collector-emitter breakdown voltage Emitter-base breakdown voltage Conditions Values Unit Min. Typ. Max. IC = -50μA -60 - - V BVCEO IC = -1mA -50 - - V BVEBO IE = -50μA -6 - - V Collector cut-off current ICBO VCB = -60V - - -100 nA Emitter cut-off current IEBO VEB = -6V - - -100 nA - - -500 mV 120 - 560 - VCE = -12V, IE = 2mA, f = 100MHz - 140 - MHz VCB = -12V, IE = 0A, f = 1MHz - 4.0 5.0 pF Collector-emitter saturation voltage DC current gain VCE(sat) IC = -50mA, IB = -5mA hFE VCE = -6V, IC = -1mA Transition frequency fT Output capacitance Cob *1 Each terminal mounted on a reference land. *2 120mW per element must not be exceeded. *3 200mW per element must not be exceeded. www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 2/8 20150527 - Rev.004 EMT2 / UMT2N / IMT2A Datasheet l Electrical characteristic curves (Ta = 25°C) <For Tr1 and Tr2 in common> Fig.1 Ground Emitter Propagation Characteristics Fig.2 Grounded Emitter Output Characteristics Fig.3 DC Current Gain vs. Collector Current (I) Fig.4 DC Current Gain vs. Collector Current (lI) www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 3/8 20150527 - Rev.004 EMT2 / UMT2N / IMT2A Datasheet l Electrical characteristic curves (Ta = 25°C) <For Tr1 and Tr2 in common> Fig.5 Collector-Emitter Saturation Voltage vs. Collector Current(l) Fig.6 Collector-Emitter Saturation Voltage vs. Collector Current(ll) Fig.7 Base-Emitter Saturation Voltage vs. Collector Current (I) Fig.8 Gain Bandwith Product vs. Emitter Current www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 4/8 20150527 - Rev.004 EMT2 / UMT2N / IMT2A Datasheet l Electrical characteristic curves (Ta =25°C) <For Tr1 and Tr2 in common> Fig.9 Collector Output Capacitance vs. Collector-Base Voltage Emitter Input Capacitance vs. Emitter-Base Voltage Fig.10 Safe Operating Area Fig.11 Safe Operating Area Fig.12 Safe Operating Area www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 5/8 20150527 - Rev.004 EMT2 / UMT2N / IMT2A Datasheet l Dimensions www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 6/8 20150527 - Rev.004 EMT2 / UMT2N / IMT2A Datasheet l Dimensions www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 7/8 20150527 - Rev.004 EMT2 / UMT2N / IMT2A Datasheet l Dimensions www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 8/8 20150527 - Rev.004