Part Number: XZMDK147W 3.2x2.4mm SMD CHIP LED LAMP Package Schematics Features ● Ideal for indication light on hand held products ● Long life and robust package ● Variety of lens types and color choices available ● Package : 1500pcs / reel ● Moisture sensitivity level : level 3 ● RoHS compliant Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MDK (AlGaInP) Unit Operating Characteristics (TA=25°C) MDK (AlGaInP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Voltage (Typ.) (IF=20mA) VF 1.95 V VF 2.5 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 mA Forward Voltage (Max.) (IF=20mA) Power Dissipation PD 75 mW Reverse Current (Max.) (VR=5V) IR 10 uA Operating Temperature TA -40 ~ +85 λP 650 nm Tstg -40 ~ +85 Wavelength of Peak Emission (Typ.) (IF=20mA) Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 630 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 28 nm C 35 pF Storage Temperature °C Capacitance (Typ.) (VF=0V, f=1MHz) Part Number XZMDK147W Emitting Color Red Emitting Material AlGaInP Lens-color Water Clear Jul 01,2011 Luminous Intensity (IF=20mA) mcd min. typ. 1300 2690 XDSB6186 SunLED Corporation Wavelength nm λP Viewing Angle 2θ 1/2 650 20° V1 Layout: Maggie L. P. 1/4 Part Number: XZMDK147W 3.2x2.4mm SMD CHIP LED LAMP MDK LED is recommended for reflow soldering and soldering profile is shown below. Jul 01,2011 XDSB6186 SunLED Corporation V1 Layout: Maggie L. P. 2/4 Part Number: XZMDK147W 3.2x2.4mm SMD CHIP LED LAMP The device has a single mounting surface. The device must be mounted according to the specifications. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Jul 01,2011 XDSB6186 SunLED Corporation V1 Layout: Maggie L. P. 3/4 Part Number: XZMDK147W 3.2x2.4mm SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS XZxxx147x Jul 01,2011 XDSB6186 SunLED Corporation V1 Layout: Maggie L. P. 4/4