SunLED

Part Number: ZRNI56W-1
PHOTOTRANSISTOR
www.SunLED.com
Features
Package Schematics
● Long life and robust package
● Standard Package: 2,000pcs/ Reel
● MSL (Moisture Sensitivity Level): 3
● RoHS compliant
D
E
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. Specifications are subject to change without notice.
L
n
u
S
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Min.
Typ.
Max.
Unit
Test Condiction
VBR CEO
Collector-to-Emitter Breakdown Voltage
30
V
IC=100μA
Ee=0mW/cm2
VBR ECO
Emitter-to-Collector Breakdown Voltage
5
V
IE=100μA
Ee=0mW/cm2
VCE(SAT)
Collector-to-Emitter Saturation Voltage
0.8
V
IC=2mA
Ee=20mW/cm2
ICEO
Collector Dark Current
100
nA
VCE=10V
Ee=0mW/cm2
TR
Rise Time (10% to 90%)
15
μs
TF
Fall Time (90% to 10%)
15
μs
0.5
mA
I(ON)
On State Collector Current
0.2
VCE=5V
IC=1mA
RL=1KΩ
VCE=5V
Ee=1mW/cm2
λ=940nm
Absolute Maximum Ratings at TA=25°C
Parameter
Maximum Ratings
Collector-to-Emitter Voltage
30V
Emitter-to-Collector Voltage
5V
Power Dissipation at (or below) 25°C Free Air Temperature
Operating / Storage Temperature Range
Feb 24, 2014
100mW
-40°C To +85°C
SDSA5249
V4
Layout: Maggie L.
P. 1/4
Part Number: ZRNI56W-1
www.SunLED.com
PHOTOTRANSISTOR
D
E
L
n
u
S
Feb 24, 2014
SDSA5249
V4
Layout: Maggie L.
P. 2/4
Part Number: ZRNI56W-1
PHOTOTRANSISTOR
www.SunLED.com
™ LED is recommended for reflow soldering and
soldering profile is shown below.
™ The device has a single mounting surface.
The device must be mounted according to the
specifications.
D
E
L
n
u
S
™ Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
™ Tape Specification (Units : mm)
™ Reel Dimension
Feb 24, 2014
SDSA5249
V4
Layout: Maggie L.
P. 3/4
Part Number: ZRNI56W-1
PHOTOTRANSISTOR
www.SunLED.com
PACKING & LABEL SPECIFICATIONS
D
E
L
n
u
S
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes
2014
Feb 24,
SDSA5249
V4
Layout: Maggie L.
P. 4/4