Part Number: ZRNI55W-3 3.2x1.6mm PHOTOTRANSISTOR www.SunLED.com Features Package Schematics ● Long life and robust package ● Standard Package: 2,000pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 ● RoHS compliant RNI D E L n u S Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Min. Typ. Max. Unit Test Condiction VBR CEO Collector-to-Emitter Breakdown Voltage 30 V IC=100μA Ee=0mW/cm2 VBR ECO Emitter-to-Collector Breakdown Voltage 5 V IE=100μA Ee=0mW/cm2 VCE(SAT) Collector-to-Emitter Saturation Voltage 0.8 V IC=2mA Ee=20mW/cm2 ICEO Collector Dark Current 100 nA VCE=10V Ee=0mW/cm2 TR Rise Time (10% to 90%) 15 μs TF Fall Time (90% to 10%) 15 μs 1 mA I(ON) On State Collector Current 0.4 VCE=5V IC=1mA RL=1KΩ VCE=5V Ee=1mW/cm2 λ=940nm Absolute Maximum Ratings at TA=25°C Parameter Maximum Ratings Collector-to-Emitter Voltage 30V Emitter-to-Collector Voltage 5V Power Dissipation at (or below) 25°C Free Air Temperature Operating / Storage Temperature Range Feb 24,2014 100mW -40°C To +85°C SDSA6553 V3 Layout: Maggie L. P. 1/4 Part Number: ZRNI55W-3 3.2x1.6mm PHOTOTRANSISTOR www.SunLED.com u S Feb 24,2014 L n D E SDSA6553 V3 Layout: Maggie L. P. 2/4 Part Number: ZRNI55W-3 3.2x1.6mm PHOTOTRANSISTOR www.SunLED.com LED is recommended for reflow soldering and soldering profile is shown below. The device has a single mounting surface. The device must be mounted according to the specifications. D E L n u S Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specification (Units : mm) Reel Dimension Feb 24,2014 SDSA6553 V3 Layout: Maggie L. P. 3/4 Part Number: ZRNI55W-3 3.2x1.6mm PHOTOTRANSISTOR www.SunLED.com PACKING & LABEL SPECIFICATIONS D E L n u S TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes Feb 24,2014 SDSA6553 V3 Layout: Maggie L. P. 4/4