Reliability Data for Safety of Machinery Safety Components OMRON Corporarion 12-May-2015 Contents of this document are subject to change without notice. -9 E-9 means *10 . Products Model Condition / Function SIL PFHｄ PL Category MTTFd(Year) DCavg (%) B10d Note E-STOP Switch E-STOP Switch Guard Lock Safety Key Selector Switch Key Selector Switch Key Selector Switch A165E series A22E series Normally Closed contact Normally Closed contact - - - - - - 1.0E+5 1.0E+5 A22LK-2RL* Normally Closed contact - - - - - - 1.0E+5 A22TK-2*L A22TK-2*R Normally Closed contact Normally Closed contact - - - - - - 1.0E+5 1.0E+5 Enabling Switch A4E Enable output - - - - - - 1.0E+5 Enabling Grip Switch A4EG Built-in enabling switch (A4E) Enable Output - - - - - - 1.0E+5 Normally closed contact conforms to IEC60947-5-1 (Direct Opening Mechanism). Normally closed contact conforms to IEC60947-5-1 (Direct Opening Mechanism). Normally closed contact has a structure that conforms to IEC60947-5-1 (Direct opening mechanism) only when the key is turned to right. Normally closed contact has a structure that conforms to IEC60947-5-1 (Direct opening mechanism) only when the key is turned to Normally closed contact has a structure that conforms to IEC60947-5-1 (Direct opening mechanism) only when the key is turned to The enabling output has a structure that conforms to IEC60947-5-8 (Three-position enabling switch). The enabling output has a structure that conforms to IEC60947-5-1 (Direct Opening Mechanism) only when the switch is gripped. The enabling output has a structure that conforms to IEC60947-5-8 (Three-position enabling switch). Enabling outputs conform to IEC60947-5-1 (Direct Opening Mechanism) only when the switch is gripped. Enabling Grip Switch A4EG Built-in E-Stop (A165E) NC contact *only A4EGBE2R041 - - - - - - 1.0E+5 Safety Limit Switch D4B-**11N Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4B-**15N Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4B-**70N Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4B-**71N Normally Closed contact - - - - - - 2.0E+7 Safety Door Switch D4BL Series Normally Closed contact - - - - - - 2.0E+6 Safety Door Switch D4BS Series Normally Closed contact - - - - - - 2.0E+6 Safety Limit Switch D4F-*02 Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4F-*20 Normally Closed contact - - - - - - 2.0E+7 Safety Door Switch D4GL Series Normally Closed contact - - - - - - 2.0E+6 Safety Door Switch D4GS-N Series Normally Closed contact - - - - - - 2.0E+6 Safety Door Switch D4JL Series Normally Closed contact - - - - - - 2.0E+6 Safety Limit Switch D4N-**20 Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**20R Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**22 Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**25 Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**26 Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**2G Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**2GR Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**2H Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**2HR Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**31 Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**31R Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**32 Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**32R Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**62 Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**62R Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**72 Normally Closed contact - - - - - - 2.0E+7 Safety Limit Switch D4N-**72R Normally Closed contact - - - - - - 2.0E+7 Safety Door Hinge Switch D4NH Series Normally Closed contact - - - - - - 2.0E+7 Safety Door Switch D4NL Series Normally Closed contact - - - - - - 2.0E+6 Safety Door Switch D4NS Series Normally Closed contact - - - - - - 2.0E+6 Normally Closed contact - - - - - - 2.0E+6 AC-15 240V 5A AC-15 240V 1.5A AC-15 240V 0.75A - - - - - - 2.0E+5 5.0E+5 9.0E+5 Safety Door Switch Safety Relay Safety Relay Safety Relay D4SL Series, D4SL-N Series G7S-[]-E G7S-[]-E G7S-[]-E 1 / 3 page Normally closed contact conforms to IEC60947-5-1 (Direct Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 2 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 2 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 2 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 2 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 2 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 1 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 2 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 2 interlocking switch according to ISO 14119. Opening Mechanism). It can be applicable as Type 2 interlocking switch according to ISO 14119. Opening Mechanism). This product conforms to EN50205 Forcibly Guided Contact Structure. This product conforms to EN50205 Forcibly Guided Contact Structure. This product conforms to EN50205 Forcibly Guided Contact Structure. Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Normally closed contact conforms to IEC 60947-5-1 (Direct Reliability Data for Safety of Machinery Safety Components OMRON Corporarion 12-May-2015 Contents of this document are subject to change without notice. -9 E-9 means *10 . Products Model Condition / Function SIL PFHｄ PL Category MTTFd(Year) DCavg (%) B10d Note Safety Relay G7SA AC-1 AC250V 6A, DC-1 DC30V 6A - - - - - - 4.0E+5 This product conforms to EN50205 Forcibly Guided Contact Structure. Frequency Inverter MX2 Series 3G3MX2-V1 Stop function in conformity to Stop Category 0 - - d 3 100 71 - Non-conntact Door Switch D40A Safety Output SIL2 2.4E-8 d 3 - - - Non-conntact Door Switch D40Z Safety Output SIL3 1.5E-10 e 4 - - - Safety Network Safety Network Safety Network Safety Network DST1-ID12SL-1 DST1-MD16SL-1 DST1-XD0808SL-1 DST1-MRD08SL-1 SIL3 SIL3 SIL3 SIL3 2.4E-10 2.4E-10 2.4E-10 5.1E-9 e e e e 4 4 4 4 - - - Safety Light Curtain F3SG-2RA* SIL1 1.1E-8 c 2 100 98 - Safety Light Curtain F3SG-4RA* SIL3 1.1E-8 e 4 100 98 - Safety Light Curtain F3SG-2RE* SIL1 9.1E-9 c 2 100 98 - Safety Light Curtain F3SG-4RE* SIL3 9.1E-9 e 4 100 98 - SIL3 1.7E-8 e 4 - - - SIL3 2.5E-8 e 4 - - - SIL3 3.3E-8 e 4 - - - SIL3 4.0E-8 e 4 - - - SIL3 4.5E-8 e 4 - - - SIL3 2.0E-8 e 4 - - - SIL3 2.7E-8 e 4 - - - SIL3 3.5E-8 e 4 - - - SIL3 1.7E-8 e 4 - - - SIL3 2.5E-8 e 4 - - - SIL3 3.3E-8 e 4 - - - SIL3 4.0E-8 e 4 - - - SIL3 2.0E-8 e 4 - - - SIL3 2.7E-8 e 4 - - - SIL3 3.5E-8 e 4 - - - SIL3 4.3E-8 e 4 - - - SIL3 1.7E-8 e 4 - - - SIL3 2.5E-8 e 4 - - - SIL3 3.3E-8 e 4 - - - SIL3 2.0E-8 e 4 - - - SIL3 2.7E-8 e 4 - - - SIL3 3.5E-8 e 4 - - - SIL3 1.7E-8 e 4 - - - SIL3 2.5E-8 e 4 - - - SIL3 2.0E-8 e 4 - - - SIL3 2.7E-8 e 4 - - - SIL3 1.7E-8 e 4 - - - Controller Controller Controller Controller Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain F3SJ-A0245P14 to A0461P14 F3SJ-A0533P14 to A0875P14 F3SJ-A0983P14 to A1271P14 F3SJ-A1487P14 to A1631P14 F3SJ-A1784P14 F3SJ-A0245N14 to A0461N14 F3SJ-A0551N14 to A0911N14 F3SJ-A0983N14 to A1271N14 F3SJ-A0245P20 to A0755P20 F3SJ-A0785P20 to A1505P20 F3SJ-A1565P20 to A2255P20 F3SJ-A2405P20 to A2495P20 F3SJ-A0245N20 to A0755N20 F3SJ-A0785N20 to A1505N20 F3SJ-A1655N20 to A2255N20 F3SJ-A2405N20 to A2495N20 F3SJ-A0260P25 to A0940P25 F3SJ-A1020P25 to A1900P25 F3SJ-A2060P25 to A2500P25 F3SJ-A0260N25 to A0940N25 F3SJ-A1020N25 to A1900N25 F3SJ-A2060N25 to A2500N25 F3SJ-A0245P30 to A1195P30 F3SJ-A1270P30 to A2495P30 F3SJ-A0245N30 to A1195N30 F3SJ-A1270N30 to A2495N30 F3SJ-A0270P55 to A2470P55 2 / 3 page It has a structure that conforms to IEC60204-1 Stop Category 0. As a subsystem, it comforms to ISO13849-1 PLd. It can be applicable as Type 4 interlocking switch according to ISO 14119. A non-contact door switch alone conforms as a subsystem to IEC61508 SIL2. The reliability of the whole system is determined upon it being combined with a connected dedicated controller It can be applicable as Type 4 interlocking switch according to ISO 14119. A non-contact door switch alone conforms as a subsystem to IEC61508 SIL3. The reliability of the whole system is determined upon it being combined with a connected dedicated controller As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. It comforms to IEC 61496-1 TYPE 2. As subsystem, it conforms to IEC61508 SIL 1 and ISO13849-1 PL c. For a cascade configuration, multiply the PFHd value by the number of sensor segments cascaded. The MTTFd value does not change when in a cascade configuration. It comforms to IEC 61496-1 TYPE 4. As subsystem, it conforms to IEC61508 SIL 3 and ISO13849-1 PL e. For a cascade configuration, multiply the PFHd value by the number of sensor segments cascaded. The MTTFd value does not change when in a cascade configuration. It comforms to IEC 61496-1 TYPE 2. As subsystem, it conforms to IEC61508 SIL 1 and ISO13849-1 PL c. For a cascade configuration, multiply the PFHd value by the number of sensor segments cascaded. The MTTFd value does not change when in a cascade configuration. It comforms to IEC 61496-1 TYPE 4. As subsystem, it conforms to IEC61508 SIL 3 and ISO13849-1 PL e. For a cascade configuration, multiply the PFHd value by the number of sensor segments cascaded. The MTTFd value does not change when in a cascade configuration. The data is applicable for the models with a protective hight from 245 to 461mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 533 to 875mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 983 to 1271mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 1487 to 1631mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight 1784mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 245 to 461mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 551 to 911mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 983 to 1271mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 245 to 755mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 770 to 1505mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 1565 to 2255mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 2405 to 2495mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 245 to 755mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 785 to 1505mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 1655 to 2255mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 2405 to 2495mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 260 to 940mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 1020 to 1900mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 2060 to 2500mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 260 to 940mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 1020 to 1900mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 2060 to 2500mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 245 to 1195mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 1270 to 2495mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 245 to 1195mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 1270 to 2495mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 270 to 2470mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. Reliability Data for Safety of Machinery Safety Components OMRON Corporarion 12-May-2015 Contents of this document are subject to change without notice. -9 E-9 means *10 . Products Model Safety Relay Unit Safety Relay Unit Safety Relay Unit Safety Relay Unit Safety Relay Unit Safety Relay Unit Safety Relay Unit F3SJ-A0270N55 to A2470N55 F3SJ-B0185P25 to B1025P25 F3SJ-B1105P25 to B2065P25 F3SJ-B0185N25 to B1025N25 F3SJ-B1105N25 to B2065N25 F3SJ-E0185P25 to E1105P25 F3SJ-E0185N25 to E1105N25 F3SR-430B0190 to 430B0990 F3SR-430B1070 to 430B2270 G9SA-300-SC G9SA-301 G9SA-321-T G9SA-321-T G9SA-501 G9SA-EX301 G9SA-EX031-T Safety Relay Unit G9SA-TH301 Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Safety Light Curtain Condition / Function SIL PFHｄ PL Category MTTFd(Year) DCavg (%) B10d SIL3 2.0E-8 e 4 - - - SIL3 1.2E-8 e 4 - - - SIL3 1.8E-8 e 4 - - - SIL3 1.2E-8 e 4 - - - SIL3 1.9E-8 e 4 - - - SIL3 1.2E-8 e 4 - - - SIL3 1.2E-8 e 4 - - - SIL3 1.4E-8 e 4 - - - SIL3 2.1E-8 e 4 - - - - - e e e d e e d 4 4 4 3 4 4 3 100 100 82 62 100 100 65 99 99 99 60 99 99 90 - - - e 4 86 99 - - - e 4 100 99 - As a subsystem, it conforms to ISO13849-1 PLe. Integrated system of G9SX-LM and E2E proximity SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 - 2.8E-8 5.1E-8 5.1E-8 1.2E-10 9.4E-11 1.1E-10 5.7E-9 5.7E-9 4.1E-9 5.8E-11 9.0E-9 - d e e e e e e e e e e e d 3 4 4 4 4 4 4 4 4 4 4 4 3 100 100 53 53 50 99 98 99 99 86 - As a subsystem, it conforms to ISO13849-1 PLd. As a subsystem, it conforms to IEC 62061 SIL3. As a subsystem, it conforms to IEC 62061 SIL3. As a subsystem, it conforms to IEC 62061 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem integrated with the E2E (E2E-X1R5F1, -X2MF1, -X2F1, -X5MF1, -X5F1, -X10MF1), it conforms to ISO13849-1 PLd. As a subsystem, the G9SX-LM alone conforms to ISO13849-1 PLd. The DC of the proximity sensor to be connected to the rotation detection input is 90%. As a subsystem, it conforms to IEC61508 SIL3. The PL of the whole system is determined upon it being combined with a non-contact switch (D40Z or D40A). As a subsystem, it conforms to IEC61508 SIL3. The PL of the whole system is determined upon it being combined with a non-contact switch (D40Z or D40A). As a subsystem, it conforms to IEC61508 SIL3. It comforms to IEC61508 SIL3 and IEC 61496-1 TYPE4 As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. As a subsystem, it conforms to IEC61508 SIL3. It comforms to IEC 61496-1 TYPE3. As subsystem, it conforms to IEC61508 SIL2 and ISO13849-1 PLd. It has a structure that conforms to IEC61800-5-2 STO function. As a subsystem, it conforms to IEC61508 SIL2. When combined with a connected dedicated controller, it conforms to both ISO 13849-1 PLe and EN1760-2. When combined with a connected dedicated controller, it conforms to both ISO 13849-1 PLd and EN1760-1. Instantaneous Safety Output Release delayed safety output Instantaneous Safety Output Release delayed safety output Safety Relay Unit Safety Relay Unit Safety Relay Unit Safety Relay Unit Safety Controller Safety Controller Safety Controller Flexible Safety Unit Flexible Safety Unit Flexible Safety Unit Flexible Safety Unit Flexible Safety Unit Low-speed Monitoring Unit G9SB series (except G9SB-3010) G9SB-3010 G9SE-201 G9SE-401 G9SE-221-T* G9SP-N10D G9SP-N10S G9SP-N20S G9SX-AD G9SX-ADA G9SX-BC G9SX-EX G9SX-GS G9SX-LM Low-speed Monitoring Unit G9SX-LM Without proximity sensor SIL3 1.2E-8 d 3 - - - Flexible Safety Unit G9SX-NS Noncontact switch input (D40A or D40Z) SIL3 4.2E-9 e 4 - - - Flexible Safety Unit G9SX-NSA Noncontact switch input (D40A or D40Z) SIL3 5.5E-9 e 4 - - - Standstill Monitoring Unit Safety Light Curtain Safety Network Controller Safety Network Controller NX-series Safety Control Unit NX-series Safety Control Unit NX-series Safety Control Unit NX-series Safety Control Unit NX-series Safety Control Unit NX-series Safety Control Unit Safety Laser Scanner AC Servo Driver G5 Series Safety Edge and Edge Controller Safety Mat System G9SX-SM MS4800 series NE1A-SCPU01-V1 NE1A-SCPU02 NX-SID800 NX-SIH400 NX-SL3300 NX-SL3500 NX-SOD400 NX-SOH200 OS32C R88D-KT/KN SGE / SCC UM / MC3 STO function (STO input and EDM output) Integrated system of edge sensor and controller Integrated system of mats and controller SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 SIL3 SIL2 SIL2 SIL2 4.8E-9 5.9E-8 5.1E-10 6.5E-10 4.3E-10 3.1E-10 3.1E-10 3.0E-10 5.5E-10 3.6E-10 8.3E-8 2.8E-8 4.8E-8 e e e e e e e e e e d d e d 4 4 4 4 4 4 4 4 4 4 3 3 3 3 100 - 97 - - Safety Relay Unit Note The data is applicable for the models with a protective hight from 270 to 2470mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 185 to 1025mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 1105 to 2065mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 185 to 1025mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 1105 to 2065mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for all models. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for all models. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 190 to 990mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. The data is applicable for the models with a protective hight from 1070 to 2270mm. It comforms to IEC 61496-1 TYPE4. As subsystem, it conforms to IEC61508 SIL3 and ISO13849-1 PLe. As a subsystem, it conforms to ISO13849-1 PLe. As a subsystem, it conforms to ISO13849-1 PLe. As a subsystem, it conforms to ISO13849-1 PLe. As a subsystem, it conforms to ISO13849-1 PLd. As a subsystem, it conforms to ISO13849-1 PLe. As a subsystem, it conforms to ISO13849-1 PLe. As a subsystem, it conforms to ISO13849-1 PLd. It has a structure of a controller, when combined with the Two-Hand Control Device that conforms to EN574 Type IIIC. As a subsystem, it conforms to ISO13849-1 PLe. Instantaneous Safety Output, Release delayed safety 3 / 3 page