MUR260 2.0A Axial Leaded Super Fast Rectifier Features · Plastic package has Underwriters Laboratories Flammability Classification 94V-0 · · · · B A · Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultra fast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension A C D DO-15 Mechanical Data Dim Min Max · Case: JEDEC DO-15 molded plastic body over passivated chip · Terminals: Plated axial leads, solderable per MIL-STD-750, A 25.40 ¾ B 5.50 7.62 Method 2026 · Polarity: Color band denotes cathode end C 0.686 0.889 D 2.60 3.60 · Mounting Position: Any · Weight: 0.045 oz., 1.2 g All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified at=60°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to ambient (Note 2) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Storage and Operating Temperature Range SYMBOL MUR260 units Vrrm Vrms Vdc 600 420 600 V If(av) 2.0 A Ifsm 35 A Vf 1.35 V Trr 50 nS RθJA 50 10 100 -55 to +150 Ir Tstg, Tj Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted 1 of 2 V °C/W µA µA °C 2of2