BY228GP 3.0A Axial Leaded Sintered Class Junction Plastic Rectifier Features · High temperature metallurgically bonded construction · Sintered glass cavity free junction · Capability of meeting environmental standard of MIL-S-19500 · High temperature soldering guaranteed 350°C /10sec/0.375”lead length at 5 lbs tension · Operate at Ta =55°C with no thermal run away · Typical Ir<0.1µA B A A C D DO-201AD Mechanical Data · Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C · Case:Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy · Polarity:color band denotes cathode · Mounting position:any Dim Min Max A 25.40 ¾ B 7.20 9.50 C 1.20 1.30 D 4.80 5.30 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage At 5.0A Maximum full load reverse current full cycle Average at 55°C Maximum DC Reverse Current at rated DC blocking voltage Typical Reverse Recovery Time Typical Thermal Resistance Ta =25°C Ta =150°C (Note 1) (Note 2) Storage and Operating Junction Temperature SYMBOL BY228GP units Vrrm Vrms Vdc 1500 1050 1500 V V V If(av) 3.0 A Ifsm 125.0 A Vf 1.50 V Ir(av) 100.0 µA Ir 5.0 100.0 Trr Rth(ja) 1000 70.0 µA µA nS K /W Tstg, Tj -65 to +175 °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Thermal Resistance from Junction to Ambient on PC board with spacing 25mm 1 of 2 1 2of2