CXOXULPHT OSCILLATOR 32.768 kHz High Temperature/Ultra-Low Power/Fast StartUp/High Shock DESCRIPTION The CXOXULPHT 32.768 kHz oscillator achieves the low power comparable with a tuning fork design and the fast start-up and tight frequency stability attained by an AT cut crystal design. Designed for applications requiring ultralow current (55 µA), fast start-up time (2 ms), and a tight frequency stability (200 ppm) for high temperature operation up to +200OC. These oscillators are also capable of withstanding significantly higher shock than a standard tuning fork design. FEATURES DIMENSIONS A 4 Fast start-up (typical 2 ms) 3 1 High shock resistance up to 10,000 g Low aging 2 D 4 3 B TOP High temperature operation up to +200OC Ultra-low current (typical 55 µA) C 2 TYPICAL BOTTOM 1 MAXIMUM DIM inches mm inches mm A 0.126 3.20 0.136 3.40 Optional Output Enable/Disable with Tri-State B 0.099 2.50 0.107 2.70 Low EMI emission C (SM1) 0.039 C (SM3/SM5) 0.044 1.00 1.12 0.043 0.048 1.09 1.21 CMOS output Hermetically sealed ceramic package Full military testing available Designed and manufactured in the USA E D 0.040 1.00 0.041 1.10 E 0.030 0.75 0.031 0.85 PIN CONNECTIONS APPLICATIONS 1. Output Enable/Disable (E) or no connection (N) Industrial 2. Ground Downhole instrumentation 3. Output Rotary shaft sensors 4. VDD Underground boring tools SUGGESTED LAND PATTERN 0.141 (3.6) 0.110 (2.9) 0.031 (0.8) 0.039 (1.05) 0.051 (1.3) 0.039 (1.0) inches (mm) 10218 Rev A STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com ABSOLUTE MAXIMUM RATINGS SPECIFICATIONS Supply Voltage VDD -0.3 V to 5.0 V Storage Temperature -55OC to 125OC Maximum Process Temperature 260OC for 20 seconds Specifications are typical at 25 C unless otherwise noted. Specifications are subject to change without notice. Tighter specifications available (contact factory). O Supply Voltage1 3.3 V ±10% Calibration Tolerance ±100 ppm Frequency Stability Over Temperature3 ±100 ppm for 25OC to 150OC ±150 ppm for 25OC to 175OC ±175 ppm for 25OC to 200OC Total Tolerance ±200 ppm for 25OC to 200OC Output Load (CMOS) 15 pF Aging, first year 10 ppm max at +25OC Aging, 1,000 hours 100 ppm max at +200OC Shock4 Std: 5,000 g, 0.3 ms, ½ sine HG: 10,000 g, 0.3 ms, ½ sine 2 Vibration5 ENABLE/DISABLE OPTIONS (E/N) For the 32.768 kHz CXOXULPHT, Statek offers two enable/disable options: E and N. The E-version has a TriState output and stops oscillating internally when the output is put into the high Z state. The N-version does not have PIN 1 connected internally and so has no enable/disable capability. The following table summarizes the Enable/Disable option E. ENABLE/DISABLE OPTION E/N FUNCTION TABLE 20 g, 10-2,000 Hz swept sine Enable (Pin 1 High*) Disable (Pin 1 Low) Operating Temp. Range -55OC up to 200OC 6 Electrical characteristics:7 SYMBOL PARAMETER MIN VOH Output Voltage High 0.9VDD VOL Output Voltage Low tstartup Start-up Time tr tf MAX UNIT V Frequency Output High Z State Oscillator Oscillates Stops * When PIN 1 is allowed to float, it is held high by an internal pull-up resistor. 0.1VDD V 2.0 ms Rise Time (10%-90%) 4.0 ns PACKAGING OPTIONS Fall Time (10%-90%) 5.0 ns CXOXULPHT Duty Cycle IDD TYP Output 45 50 55 % - Tray Pack - 12 mm tape, 7ā or 13ā reels 55µA Input Current Per EIA 481 (see Tape and Reel data sheet #10109) 1. Other voltages available. Contact factory. 2. Other tolerances available. 3. Does not include calibration tolerance. Other tolerances available. 4. Shock at room temperature. Contact factory for requirements above 10,000 g. 5. Per MIL-STD-202G, Method 204D, Condition D at room temperature. Random vibration testing also available. 6. Expected life at 200OC is in excess of 1,500 hours. 7. All parameters are measured at 25OC with a 10 M1 and 15 pF load with VDD = 3.3 V. HOW TO ORDER CXOXULPHT 32.768 kHz SURFACE MOUNT CRYSTAL OSCILLATORS CXOXULPHT HG HG = High Shock. Otherwise leave blank 4 S N Supply Voltage 4 = 3.3 V āSā if special or custom design. Blank if Std. Enable/Disable Option E or N SM3 Terminations Blank = SM1 = Gold Plated (Lead Free) SM5 = Solder Dipped (Lead Free) 32.768K, / / / 200 / Total Frequency Tolerance (in ppm) Frequency k = kHz H Temp. Range: H = +25OC to +200OC S = Customer Specified OR 100 Calibration Tolerance @ 250C (in ppm) / 175 / Frequency Stability over Temp. Range (in ppm) / H Temp. Range: H = +25OC to +200OC S = Customer Specified 10218 Rev A STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com