TIGER ELECTRONIC CO.,LTD DF005 THRU DF10 Voltage Range 50 to 1000 Volts Current 1.0 Amperes Single Phase 1.0 AMPS. Silicon Bridge Rectifiers DB Features • UL Recognized File # E-230084 • Ideal for printed circuit board • Reliable low cost construction technique - + .255(6.5) .315(8.0) .245(6.2) .285(7.24) results in inexpensive product • High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ~ .350(8.9) .300(7.6) ~ .013(0.33) .0088(0.22) .205(5.2) .195(5.0) .335(8.51) .320(8.13) Mechanical Data .045(1.14) .035(0.89) • Case: Molded plastic • Lead: solder plated • Polarity: As marked .130(3.30) .120(3.05) .08(2.03) .05(1.27) .023(0.58) .018(0.46) .185(4.69) .150(3.81) .075(1.90) .055(1.39) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current @TA = 40℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25℃ rated DC blocking voltage per leg TA = 125℃ Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range VRRM VRMS VDC DF005 DF01 DF02 DF04 DF06 DF08 DF10 UNITS 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V I(AV) 1.0 A IFSM 50 A VF 1.1 V IR 10 500 μA RθJA RθJL 40 15 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ NOTE：Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.with 0.47×0.47”(12×12mm) Copper Pads. RATING AND CHARACTERISTIC CURVES DF005 THRU DF10 Page 2 of 2 h p: //www. 21yangj ie. com