Opticom Fiber Wall Mount Enclosure Part Numbers: FWME2, FWME4, FWME8 INSTALLATION INSTRUCTIONS © Panduit Corp. 2010 FWME8 FS010 FWME4 FWME2 Contents: Additional parts included with FWME4, FWME8 enclosures: Parts included with all enclosures: 1 - ENCLOSURE 2 - CABLE ENTRY GROMMETS 2 - STRAIN RELIEF BRACKETS 4 - BLACK CABLE TIES 1 - FIBER CAUTION LABEL 1 - LASER WARNING LABEL 1 - FWMEHKIT 3 - #10-32 HEX NUTS 2 - #10-32 x 3/8" SCREWS 1 - FLAT WASHER 4 - BEVELED ENTRY CLIPS 2 - PORT I.D. LABELS Additional parts included with FWME2 enclosures: 1 - BEVELED ENTRY CLIPS 1 - PORT I.D. LABELS Assembly Instructions: 1. Determine the cable entry location on the enclosure. Remove the knockout by inserting a screwdriver into the slot located in the center of the knockout and applying a twisting motion from the inside of the enclosure twisting out. Insert grommet following proper cutting diagram. Apply Laser Warning Label and Caution Label on the inside of the larger door in a clearly visible location. Apply Port I.D. Label(s) on the inside of the small door (as shown). Laser Warning Label Cut the small circle for 1" dia. innerduct Cut the large circle for 1-1/2" dia. innerduct Cut the straight lines when not using any innerduct Grommet Port I.D. Label Fiber Caution Label Enclosure For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2 INSTALLATION INSTRUCTIONS © Panduit Corp. 2010 2. Install strain relief in slot next to grommet with the #10-32 x 3/8"screw and #10-32 hex nut provided. FS010 Optional Accessories 3a. Locks: FELS, FELU Remove appropriate knockout in door to install lock. 3b. Splice Tray Holder: FST6H4, FSTHS (Note: FWME4 uses one FST6H4). Remove fiber spools and install appropriate splice tray holder using existing #10-32 nuts. FELS FELU FELS FELU Knockout Strain Relief FST6H4 FSTHS FWME4, FWME8 (shown) .25 DIA Keyslot 4. Mount enclosure to wall using the appropriate location guide on this page. Mounting hardware not provided. FWME2 9.5 8.0 FWME2 Location Guide .25 DIA Keyslot 13.0 13.0 .25 DIA Keyslot 17.5 10.0 FWME4 Location Guide FWME8 Location Guide E-mail: [email protected] For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp www.panduit.com Page 2 of 2 Fax: (708) 444-6993