SSF7508A Main Product Characteristics: VDSS 75V RDS(on) 6mΩ (typ.) ID 100A D2PAK Marking and pin Assignment Features and Benefits: Advanced MOSFET process technology Special designed for PWM, load switching and general purpose applications Ultra low on-resistance with low gate charge Fast switching and reverse body recovery 175℃ operating temperature Schematic diagram Description: It utilizes the latest processing techniques to achieve the high cell density and reduces the on-resistance with high repetitive avalanche rating. These features combine to make this design an extremely efficient and reliable device for use in power switching application and a wide variety of other applications. Absolute max Rating: Symbol Parameter Max. ID @ TC = 25°C Continuous Drain Current, VGS @ 10V ① 100 ID @ TC = 100°C Continuous Drain Current, VGS @ 10V ① 70 IDM Pulsed Drain Current ② 400 Power Dissipation ③ 200 W Linear Derating Factor 1.3 W/°C VDS Drain-Source Voltage 75 V VGS Gate-to-Source Voltage ± 20 V EAS Single Pulse Avalanche Energy @ L=0.3mH ② 205 mJ IAS Avalanche Current @ L=0.3mH ② 37 A TJ TSTG Operating Junction and Storage Temperature Range -55 to + 175 °C PD @TC = 25°C ©Silikron Semiconductor CO.,LTD. 2014.02.19 www.silikron.com Version : 1.0 Units A page 1 of 8 SSF7508A Thermal Resistance Symbol Characterizes RθJC RθJA Typ. Max. Units Junction-to-case③ — 0.75 ℃/W Junction-to-ambient (t ≤ 10s) ④ — 62 ℃/W Junction-to-Ambient (PCB mounted, steady-state) ④ — 40 ℃/W Electrical Characterizes @TA=25℃ unless otherwise specified Symbol Parameter Min. Typ. Max. Units V(BR)DSS Drain-to-Source breakdown voltage 75 — — V RDS(on) Static Drain-to-Source on-resistance — 6 8 — 10.5 — VGS(th) Gate threshold voltage 2 — 4 — 2.4 — IDSS Drain-to-Source leakage current — — 1 — — 50 IGSS Gate-to-Source forward leakage — — 100 — — -100 Qg Total gate charge — 118 — Qgs Gate-to-Source charge — 25 — Qgd Gate-to-Drain("Miller") charge — 43 — td(on) Turn-on delay time — 20 — tr Rise time — 18 — td(off) Turn-Off delay time — 67 — tf Fall time — 26 — Ciss Input capacitance — 4972 — Coss Output capacitance — 402 — Crss Reverse transfer capacitance — 366 — mΩ V μA nA Conditions VGS = 0V, ID = 250μA VGS=10V,ID = 30A TJ = 125℃ VDS = VGS, ID = 250μA TJ = 125℃ VDS = 75V,VGS = 0V TJ = 125°C VGS =20V VGS = -20V ID = 30A, nC VDS=30V, VGS = 10V VGS=10V, VDS=30V, ns RL=15Ω, RGEN=2.55Ω VGS = 0V, pF VDS = 25V, ƒ = 800KHz Source-Drain Ratings and Characteristics Symbol IS ISM Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Min. Typ. Max. Units — — 100 A — — 400 A Conditions MOSFET symbol showing the integral reverse p-n junction diode. VSD Diode Forward Voltage — 0.88 1.3 V IS=30A, VGS=0V trr Reverse Recovery Time — 45.7 — ns TJ = 25°C, IF =75A, Qrr Reverse Recovery Charge — 91 — nC di/dt = 100A/μs ©Silikron Semiconductor CO.,LTD. 2013.02.19 www.silikron.com Version : 1.0 page 2 of 8 SSF7508A Test circuits and Waveforms Switch Waveforms: Notes: ①Calculated continuous current based on maximum allowable junction temperature. ②Repetitive rating; pulse width limited by max. junction temperature. ③The power dissipation PD is based on max. junction temperature, using junction-to-case thermal resistance. ④The value of RθJA is measured with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C ©Silikron Semiconductor CO.,LTD. 2013.02.19 www.silikron.com Version : 1.0 page 3 of 8 SSF7508A Typical electrical and thermal characteristics Figure 1: Typical Output Characteristics Figure 3. Drain-to-Source Breakdown Voltage vs. Temperature ©Silikron Semiconductor CO.,LTD. Figure 2. Gate to source cut‐off voltage 2013.02.19 www.silikron.com Figure 4: Normalized On-Resistance Vs. Case Temperature Version : 1.0 page 4 of 8 SSF7508A Typical electrical and thermal characteristics Figure 5. Maximum Drain Current Vs. Case Temperature Figure 6.Typical Capacitance Vs. Drain-to-Source Voltage Figure7. Maximum Effective Transient Thermal Impedance, Junction-to-Case ©Silikron Semiconductor CO.,LTD. 2013.02.19 www.silikron.com Version : 1.0 page 5 of 8 SSF7508A Mechanical Data: TO263 PACKAGE OUTLINE DIMENSION Symbol A B C D1 D2 D3 E F G H I K a1 a2 Dimension In Millimeters Min Max 9.660 10.280 1.020 1.320 8.590 9.400 1.140 1.400 0.700 0.950 5.080 (TYP) 15.090 15.390 1.150 1.400 4.300 4.700 2.290 2.790 0.250 (TYP) 1.300 1.600 0.450 0.650 80 00 ©Silikron Semiconductor CO.,LTD. 2013.02.19 www.silikron.com Dimension In Inches Min Max 0.380 0.405 0.040 0.052 0.338 0.370 0.045 0.055 0.028 0.037 0.200 (TYP) 0.594 0.606 0.045 0.055 0.169 0.185 0.090 0.110 0.010 (TYP) 0.051 0.063 0.018 0.026 10 80 Version : 1.0 page 6 of 8 SSF7508A Ordering and Marking Information Device Marking: SSF7508A Package (Available) D2PAK(TO263) Operating Temperature Range C : -55 to 175 ºC Devices per Unit Package Units/ Tubes/Inner Type Tube Box D2PAK 50 20 Units/Inner Box Inner Units/Carton Boxes/Carton Box Box 1000 6 6000 Reliability Test Program Test Item Conditions Duration Sample Size High Temperature Reverse Bias(HTRB) High Temperature Gate Bias(HTGB) Tj=125℃ to 175℃ @ 80% of Max VDSS/VCES/VR 168 hours 500 hours 1000 hours 3 lots x 77 devices Tj=150℃ or 175℃ @ 100% of Max VGSS 168 hours 500 hours 1000 hours 3 lots x 77 devices ©Silikron Semiconductor CO.,LTD. 2013.02.19 www.silikron.com Version : 1.0 page 7 of 8 SSF7508A ATTENTION: ■ ■ ■ ■ ■ ■ ■ ■ ■ Any and all Silikron products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your Silikron representative nearest you before using any Silikron products described or contained herein in such applications. Silikron assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all Silikron products described or contained herein. Specifications of any and all Silikron products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. Silikron Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all Silikron products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of Silikron Semiconductor CO.,LTD. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. Silikron believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the Silikron product that you intend to use. This catalog provides information as of Dec, 2008. Specifications and information herein are subject to change without notice. Customer Service Worldwide Sales and Service: [email protected] Technical Support: [email protected] Suzhou Silikron Semiconductor Corp. 11A, 428 Xinglong Street, Suzhou Industrial Park, P.R.China TEL: (86-512) 62560688 FAX: (86-512) 65160705 E-mail: [email protected] ©Silikron Semiconductor CO.,LTD. 2013.02.19 www.silikron.com Version : 1.0 page 8 of 8