DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Applications Product Description The SE5501L is a complete 802.11n WLAN RF frontend module providing all the functionality of the power amplifiers, LNAs, power detector, Antenna switches, filtering and associated matching. The SE5501L provides a complete 2.4 GHz and 5 GHz WLAN RF solution from the output of the transceiver to the antennas in a compact form factor. IEEE802.11b DSSS WLAN IEEE802.11a,g,n OFDM WLAN Embedded applications with Bluetooth (Mobile) Features Direct to Battery operation All RF ports matched to 50 Ω Integrated 2.4/5 GHz PA, 2.4/5 GHz LNA, T/R switches and filtering Integrated Power Detector 20 dBm @ 3 % EVM, 802.11gn, 54 Mbps 18 dBm @ 3.0 % EVM, 802.11an, 54 Mbps Lead free, Halogen Free and RoHS compliant Compact package, 3 x 5 x 0.9 mm, MSL 3 Ordering Information Part No. Package Remark SE5501L SE5501L-R SE5501L-EK1 30 pin QFN 30 pin QFN N/A Samples Tape & Reel Evaluation kit The receive path is designed to maximize performance by providing both a low noise amplifier as well as a bypass state, for use when high power signals are being received. Designed for ease of use, all RF ports are matched to 50 Ω to simplify PCB layout and the interface to the transceiver RFIC. The SE5501L also includes a transmitter power detector for each band with 20 dB of dynamic range. The SE5501L is optimized for mobile applications with direct to battery operation Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 1 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Functional Block Diagram LEN2 RX2 RX5 PEN2 2.4 GHz LNA TX2 2.4 GHz PA BTRX 5 GHz LNA pwr det DET BTALL CBT CRX ANT2 TX5 5 GHz PA LEN5 ANT5 PEN5 Figure 1: Functional Block Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 2 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Pin Out Diagram RX2 GND RX5 VCC CREF PEN2 DNC LEN2 CRX GND TX2 GND SP5 BTRX VCC BTALL DET GND TX5 ANT2 GND ANT5 GND GND CBT PEN5 LEN5 VCC VCC SP2 Figure 2: SE5501L Pin Out (Top View Through Package) Pin Out Description Pin No. Name Description Pin No. Name Description 1 RX2 2.4 GHz RX output 14 DET Power Detector Output 2 GND Ground 15 TX5 5 GHz Transmit Port 3 RX5 5 GHz RX output 16 SP2 2.4 GHz bias speedup 4 VCC Supply Voltage 17 VCC Supply Voltage 5 CREF 18 VCC 6 PEN2 19 LEN5 7 DNC 20 PEN5 8 LEN2 21 CBT Supply Voltage Enable for 5 GHz LNA and RX Switch Enable for 5 GHz PA and TX Switch Switch control for BT 9 CRX 22 GND Ground 10 GND Logic Reference Voltage Enable for 2.4 GHz PA and TX Switch Do Not Connect Enable for 2.4 GHz LNA and RX Switch Switch control for RX Switches Ground 23 GND Ground 24 ANT5 5 GHz Antenna Port 25 GND Ground 26 ANT2 2.4 Ghz Antenna Port 11 TX2 2.4 GHz Transmit Port 12 SP5 5 GHz bias speedup 13 VCC Supply Voltage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 3 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Pin No. Name 27 GND 28 BTALL Description Pin No. Name Description Ground 29 BTRX BT RX Port BT Port 30 GND Ground Absolute Maximum Ratings These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected workstations. Symbol Definition Min. Max. Unit VCC Supply Voltage -0.3 5.5 V VIN Control Pin Voltages -0.3 3.6 V - +10 dBm Operating Temperature Range -40 85 °C Storage Temperature Range -40 125 °C 1000 V TXRFIN TA TSTG ESD HBM TX2/TX5, with ANT2/ANT5 terminated in 50Ω JEDEC JESD22-A114 All pins Recommended Operating Conditions Symbol Parameter Min. Typ. Max. Unit VCC Supply Voltage 3.0 3.3 4.8 V TA Ambient Temperature -40 25 85 °C Control Logic Characteristics Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 4 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Parameter max Units 1.7 3.6 V Logic input high : VIH VREF-0.3 3.6 V Logic input low : VIL 0 0.3 V Logic high reference : VREF min nom Logic input current : IIH 0.5 5 µA Logic input current : IIL 0.1 1 µA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 5 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End DC Electrical Characteristics Conditions: VCC = 3.3 V,, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted Symbol Parameter Conditions Min. Typ. Max. 180 190 160 170 100 - 190 200 170 180 - 120 - Total 802.11g Transmit Supply Current POUT = 20 dBm, 54 Mbps OFDM signal, 64QAM, PEN2 = Hi, POUT = 18 dBm, 54 Mbps OFDM signal, 64QAM, PEN2 = Hi, TXICQ-G Quiescent current , 802.11g Transmit supply Current No RF applied, PEN2=Hi - TXICC-A Total 802.11a Transmit Supply Current POUT = 18 dBm, 54 Mbps OFDM signal, 64QAM, PEN5= Hi POUT = 16 dBm, 54 Mbps OFDM signal, 64QAM, PEN5= Hi - TXICC-G Unit - mA mA mA TXICQ-A Quiescent current , 802.11a Transmit supply Current No RF applied, PEN5- Hi RXICC-G Total 802.11b/g Receive Supply Current LEN= Hi LEN = Lo - 15 0.2 mA RXICC-A Total 802.11a Receive Supply Current LEN= Hi LEN = Lo - 15 0.2 mA Total BT Supply Current CBT = Hi - 0.2 mA Total Supply Current No RF, PEN2=PEN5=LEN2=LEN5=0V - 10 μA ICC-BT ICC_OFF Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 mA 6 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Operating Modes Mode# Mode Description PEN2 LEN2 PEN5 LEN5 CRX CBT CREF 0 All Off 0 0 0 0 0 0 X 1 BT 0 0 0 0 0 1 1 2 BT + RX5 Low Gain 0 0 0 0 1 1 1 3 BT + RX5 High Gain 0 0 0 1 1 1 1 4 BT + TX5 0 0 1 0 0 1 1 5 RX2 Low Gain + RX5 Low Gain 0 0 0 0 1 0 1 6 RX2 High Gain + RX5 Low Gain 0 1 0 0 1 0 1 7 RX2 Low Gain + RX5 High Gain 0 0 0 1 1 0 1 8 TX2 1 0 0 0 0 0 1 9 TX5 0 0 1 0 0 0 1 10 RX2 High Gain + RX5 High Gain 0 1 0 1 1 0 1 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 7 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End AC Electrical Characteristics 2.4 GHz Transmit Characteristics Conditions: VCC = 3.3 V, PEN2= CREF=Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol FIN Parameter Frequency Range Condition Min. Typ. - 2400 - 2485 MHz 2.5 2.0 3.5 2.5 % 22 25 dB -10 -10 dBc EVM EVM Pout = 19.5 dBm Pout = 18 dBm S21 Gain 2400 – 2485 MHz Out of Band Gain 1600 – 1660 MHz 3200 – 3215 MHz Gain Variation Over 2400-2485 MHz Band S21_OOB ∆S21 19 1.5 Max. Unit 2 dBpp S11 Input Return Loss -14 -10 dB S22 Output Return Loss -10 -6 dB PN Wideband Noise NF Noise Figure 2f 800 – 2170 MHz -140 dBm/Hz 10 2f @ Pout= 22 dBm -25 -20 3f 3f @ Pout = 22 dBm -35 -30 ACP11b 11b @ Pout=22 dBm: fc +/- 11 MHz fc +/- 22 MHz -34 -54 -32 -52 ACP11g 11g @ Pout=20 dBm: fc +/- 11 MHz fc +/- 20 MHz fc +/- 30 MHz -23 -30 -43 -20 -28 -40 11b Harmonics Spectral Mask STAB dBm/MHz 11n @ Pout=18 dBm: fc +/- 11 MHz fc +/- 20 MHz fc +/- 30 MHz ACP11n Stability dB POUT ≤ 20dBm Load VSWR = 10:1 dBc dBc dBc -23 -30 -48 -20 -28 -45 All non-harmonically related outputs less than -45 dBm/MHz Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 8 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End 2.4 GHz Receive Characteristics Conditions: VCC = 3.3V, LEN2=CRX=CREF = Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter FOUT Frequency Range S21 Gain Condition Min. Typ. - 2400 - 2485 13 15 17 LEN2 = Hi Max. Unit MHz dB LEN2 = Lo -8 Out of Band Gain 800 – 1990 MHz 7 Gain Variation 2400 – 2485 MHz, Over any 20MHz band - 0.25 0.4 dB NF Noise Figure LEN2 = Hi - 2.0 2.5 dB IIP3 Input Third Intercept LEN2 = Hi 0 2 - dBm -25 - - dB -10 -8 - dBm - -12 -10 dB -8 -7 - S21_OOB ΔS21 ISOLRRX Order Reverse Isolation INT Interferer S11 Input Return Loss 1710-1990, max gain change 0.5 dB LEN2 = Hi IP1dB Input P1dB dBm LEN2 = Lo TEN dB Enable Time 10% to 90% of RX RF power, from time that LEN2 is at 50% +5 +10 - - - 800 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 nsec 9 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End 5 GHz Transmit Characteristics Conditions: VCC = 3.3 V, PEN5=CREF= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol FIN Parameter Frequency Range EVM EVM S21 Gain S21_OOB ∆S21 Condition Min. Typ. - 5150 - 5850 MHz 2.5 2.0 3.5 2.5 % 18 21 dB -15 -8 -15 dBc 2.0 3.0 dBpp Pout = 18 dBm Pout = 17 dBm 15 Out of Band Gain 3265 – 3900 MHz 6900 – 7250 MHz 7250 – 7800 MHz Gain Variation Over 5150-5850 MHz Band Max. Unit S11 Input Return Loss -10 -8 dB S22 Output Return Loss -10 -6 dB PN Wideband Noise NF Noise Figure 2f 800 – 2170 MHz -150 dBm/Hz 10 2f @ Pout= 18 dBm -40 -35 3f 3f @ Pout = 18 dBm -50 -45 ACP11a 11a @ Pout=18 dBm: fc +/- 11 MHz fc +/- 20 MHz fc +/- 30 MHz -23 -30 -43 -20 -28 -40 11n @ Pout=16 dBm: fc +/- 11 MHz fc +/- 20 MHz fc +/- 30 MHz -23 -30 -48 -20 -28 -45 Harmonics dB dBm/MHz dBc Spectral Mask ACP11n Stability POUT ≤ 18dBm Load VSWR = 10:1 dBc All non-harmonically related outputs less than -45 dBm/MHz Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 10 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End 5 GHz Receive Characteristics Conditions: VCC = 3.3 V, LEN5=CREF=CRX= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter FOUT Frequency Range S21 Gain Condition Min. Typ. Max. Unit - 5150 - 5850 MHz LEN5 = Hi 8 11 14 dB LEN5 = Lo -19 -14 -9 dB Out of Band Gain 800 – 1990 MHz - - -10 dB Gain Variation 5150 – 5850 MHz, Over any 40MHz band - 0.25 0.4 dB NF Noise Figure LEN5=Hi - 2.5 3 dB IIP3 Input Third Intercept LEN5= Hi 3 5 - dBm 20 - - dB -10 - - dBm - -6 LEN5 = Hi -7 -5 - LEN5 = Lo +5 +10 - - - 800 S21_OOB ΔS21 ISOLRRX Order Reverse Isolation INT Interferer S11 Input Return Loss IP1dB TEN 1710 - 2500 MHz, max gain change = 0.5 dB - dB Input P1dB Enable Time dBm 10% to 90% of RX RF power, from time that LEN5 is at 50% nsec Bluetooth Characteristics Conditions: VCC = 3.3 V, CBT=CREF= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol FOUT Parameter Frequency Range Condition Min. Typ. Max. - 2400 - 2485 ANT2 to BTALL (CBT= Hi) - 1.0 2.0 Unit MHz BTIL Insertion Loss S11 BT Port Return Loss CBT= Hi - -14 -10 dB Switch Isolation CBT= Hi 20 - - dB 10% to 90% of BT RF power, from time that CBT is at 50% - - 800 nsec ISOLSW TEN Enable Time dB 0.8 BTALL to BTRX ( LEN2=Hi) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 11 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Power Detector Characteristics Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit PEN2= Hi PEN5 = Hi 2400 5150 - 2500 5850 MHz 0 - 22 dBm FOUT Frequency Range PDR Power detect range, peak power PDZLOAD DC load impedance - - 2.5 PDVP20 Output Voltage, POUT = 20 dBm - - 0.8 1.3 V PDVpnoRF Output Voltage, POUT = No RF - - 0.130 - V +1.5 dB PDVAR Power Detector Accuracy PDBW Power Detector Output Bandwidth Measured at ANT Pout>10 dBm -1.5 kΩ 350 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 KHz 12 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Package Diagram 30 29 28 27 26 26 27 28 29 30 1 25 25 1 2 24 24 2 3 23 23 3 4 22 22 4 5 21 21 5 6 20 20 6 7 19 19 7 8 18 18 8 9 17 17 9 10 16 16 10 11 12 13 14 15 15 14 13 12 11 TOP VIEW BOTTOM VIEW Figure 4: Package Outline Drawing Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 13 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Recommended PCB Footprint 30 29 28 27 30 26 29 28 27 26 30 29 28 27 26 1 25 1 25 1 25 2 24 2 24 2 24 3 23 3 23 3 23 4 22 4 22 4 22 5 21 5 21 5 21 6 20 6 20 6 20 7 19 7 19 7 19 8 18 8 18 8 18 9 17 9 17 9 17 10 16 10 16 10 16 11 12 13 14 15 11 12 13 14 15 11 12 13 14 15 Figure 5: Recommended PCB footprint Package Handling Information Because of its sensitivity to moisture absorption, instructions on the shipping container label must be followed regarding exposure to moisture after the container seal is broken, otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SE5501L is capable of withstanding a Pb free solder reflow. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. If the part is manually attached, precaution should be taken to insure that the device is not subjected to temperatures above its rated peak temperature for an extended period of time. For details on both attachment techniques, precautions, and handling procedures recommended, please refer to: “Quad Flat No-Lead Module Solder Reflow & Rework Information”, Document Number QAD-00045. “Handling, Packing, Shipping and Use of Moisture Sensitive QFN”, Document Number QAD-00044. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 14 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Branding Information Pin 1 Identifier Terminal Finish Pin 1 e3 Part Number Lot Code SiGe SE5501L Lot Code Figure 6: SE5501L Branding Information Document Change History Revision Date Notes 1.0 06/17/09 Created 1.1 07/14/2009 Updated pin-out 1.2 12/11/2009 Updated Package Outline and specifications 1.3 January-14-2011 Updated specifications 1.4 February-24-2011 Updated specifications 1.5 April-12-2011 Updated specifications 1.6 June-08-2011 Updated specifications 1.7 July-07-2011 Updated MSL rating 1.8 August-21-2011 Updated specifications 1.9 April-11-2012 Updated with Skyworks logo and disclaimer statement Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 15 DATA SHEET SE5501L: Dual-Band 802.11n WLAN/BT Front-End Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 16