S4KBP20-C ~ S4KBP80-C

S4KBP20-C ~ S4KBP80-C
Voltage 200V ~ 800V
4.0 Amp Glass Passivited Bridge Rectifiers
Elektronische Bauelemente
RoHS Compliant Product
FEATURES
KBP
Ideal for printed circuit board
Low forward voltage drop, high current capability
Reliable low cost construction utilizing molded plastic
technique results in inexpensive product
These are Halogen & Pb Free components
This series is UL recognized under Component Index,
file number E255340
Millimeter
Min.
Max.
14.30
14.70
10.80
11.20
1.35
1.75
14.00
15.00
1.30
1.70
0.60
0.80
REF.
A
B
C
D
E
F
REF.
G
H
I
J
K
Millimeter
Min.
Max.
3.40
3.60
3.70
3.90
0.90
1.10
2.10
2.30
0.40
0.60
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, de-rate current by 20%.)
Part Number
Parameter
Symbol
Maximum Recurrent Peak Reverse Voltage
Average Rectified Output
Current @50HZ sine wave,
R-load
VRRM
Tc=110°C,
(with heatsink)
TA=25°C
(without heatsink)
Peak Forward Surge Current @
50HZ sine wave, 1 cycle, TA=25°C
Unit
S4KBP20-C
S4KBP40-C
S4KBP60-C
S4KBP80-C
200
400
600
800
V
4
IO
A
2
IFSM
150
A
VFM
1
V
IRRM
5
µA
It
2
93
As
Typical Thermal Resistance (with heat sink)
RθJC
1.5
°C/W
Typical Thermal Resistance(without heat sink)
RθJA
45
°C/W
Typical Thermal Resistance(without heat sink)
RθJL
8
°C/W
TJ,TSTG
150, -40~150
°C
Maximum Peak Forward Voltage
Peak Reverse Current
2
1
2
I t Rating for Fusing @1ms≤t＜8.3ms,
TJ=25°C,Rating of per diode
Operating and Storage temperature range
2
Notes：
1. VRM=VRRM, Pulse measurement, Rating of per diode.
2. IFM=2A, Pulse measurement, Rating of per diode
http://www.SeCoSGmbH.com/
29-Jun-2012 Rev. A
Any changes of specification will not be informed individually.
Page 1 of 2
S4KBP20-C ~ S4KBP80-C
Elektronische Bauelemente
Voltage 200V ~ 800V
4.0 Amp Glass Passivited Bridge Rectifiers
RATINGS AND CHARACTERISTIC CURVES
http://www.SeCoSGmbH.com/
29-Jun-2012 Rev. A
Any changes of specification will not be informed individually.
Page 2 of 2