DTA114TE / DTA114TUA / DTA114TCA / DTA114TSA PNP Digital Transistors (Built-in Resistors) Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors. The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. Only the on/off conditions need to be set for operation, making device design easy. EQUIVALENT CIRCUIT DTA114TE (SOT-523) DTA114TUA (SOT-323) Addreviated symbol:94 Addreviated symbol:94 DTA114TSA (TO-92S) DTA114TCA (SOT-23) Addreviated symbol:94 ABSOLUTE MAXIMUM RATINGS at (TA = 25°C unless otherwise noted) Parameter LIMITS(DTA114T□) Symbol E UA Unit CA SA Collector-Base Voltage VCBO -50 V Collector-Emitter Voltage VCEO -50 V Emitter-Base Voltage VEBO -5 IC -100 Collector Current-Continuous Collector Dissipation Junction & Storage temperature PC 150 mA 200 TJ, TSTG 300 mW 150, -55~150 ℃ ELECTRICAL CHARACTERISTICS at (TA = 25°C unless otherwise noted) Parameter Symbol Min. Typ. Max. Collector-base breakdown voltage V(BR)CBO -50 - - Collector-emitter breakdown voltage V(BR)CEO -50 - - Emitter-base breakdown voltage Unit Test Conditions IC= -50A, IE= 0 V IC= -1mA, IB= 0 V(BR)EBO -5 - - V IE= -50A, IC=0 Collector cut-off current ICBO - - -0.5 A VCB= -50V, IE=0 Emitter cut-off current IEBO - - -0.5 A DC current gain hFE 100 250 600 VCE(sat) - - -0.3 V IC= -10mA, IB= -1mA fT - 250 - MHz VCE= -10V, IC= -5mA, f= 100MHz R1 7 10 13 kΩ Collector-emitter saturation voltage Transition frequency Input resistor http://www.SeCoSGmbH.com/ 11-Aug-2010 Rev. A VEB= -4V, IC=0 VCE= -5V, IC= -1mA Any changes of specification will not be informed individually. Page 1 of 2 DTA114TE / DTA114TUA / DTA114TCA / DTA114TSA Elektronische Bauelemente PNP Digital Transistors (Built-in Resistors) CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 11-Aug-2010 Rev. A Any changes of specification will not be informed individually. Page 2 of 2