● ● ● ● Features Unregulated Converter ● ● ECONOLINE Low Cost 1W Converter 4kVDC / 1 sec High Isolation Low Output Ripple Wide Operating Temperature Range of -40°C to +85°C Industry Standard Pinout UL Certified DC/DC-Converter with 3 year Warranty Selection Guide Part Number SIP 7 Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency (%) Max Capacitive Load (1) 5 5 200 70 1200µf RKE-0505S/H 1 Watt SIP7 Single Output Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range ±10% Output Voltage Accuracy -2% typ. / ±5% max. Efficiency (@ Full Load) 65% min. / 70% typ. Operating Frequency 50kHz min / 65kHz typ. / 105kHz Output Ripple & Noise 55mVp-p typ. / 100mVp-p max. Line Voltage Regulation Low Line to High Line @ max. Load 1.2% typ. of 1% Vin Load Voltage Regulation (10% to 100% Load) 12% typ. / 15% max. Isolation Voltage (tested for 1 second*) 4kVDC (rated for 1 minute*) 3kVDC Isolation Capacitance 75pF max. Isolation Resistance Viso=500V RoHS 2011/65/EU 6/6 1GΩ min. Short Circuit Protection E-358085 1 sec. Operating Temperature Range -40°C to +85°C Storage Temperature Range -55°C to 125°C Humidity UL-60950-1 Certified 95% max. Size 19.60mm x 10.20mm x 7.05mm Weight RKE-0505S/H 2.7g MTBF (25°C) using MIL-HDBK 217F 850 x 10³ hours (85°C) using MIL-HDBK 217F 123 x 10³ hours Certification UL General Safety Report: E358085-A4 UL60950-1 *Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. (Ambient Temperature) Maximum capacitive load is defined as the capacitive load that will allow start up in under 1second without damage to the converter. 100 Tolerance Envelopes Output Voltage +15% +12% +5% -2% VNOM -5% Typical Load Line Output Power (%) Notes Note1: Derating-Graph Safe Operating Area 30 0 -40 0 50 Operating Temperature °C 10% 50% 125 100% +Vout load current (%) E-60 100 85 Refer to Application Notes REV: 1/2015 www.recom-power.com ECONOLINE RKE-0505S/H DC/DC-Converter Typical Characteristics Efficiency vs Load Deviation vs Load Deviation from Nominal % 100 Efficiency % 80 60 40 20 0 0 20 60 40 80 30 25 20 15 10 5 0 -5 0 20 40 80 60 100 Load % 100 Load % Package Style and Pinning (mm) RECOM RKE-0505S/H xxxx 10.20 4.10 1 2 Pin Connections RKE-0505S/H Pin # 0.51 typ. Pb 1 7 5 0.25 typ. 0.51 typ. RKE 7.05 Single +Vin 2 -Vin 5 -Vout 7 +Vout XX.X ± 0.5 mm XX.XX ± 0.25 mm Recommended Footprint Details Top View 19.60 Bottom View 1.27 1 2 5 7 7.05 1.00 ø+0.15/0 2.54 2.54 2.0 2.54*6=15.24 2.54 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 1/2015 E-61