Features ● ● ● ● ● ● Regulated Converters 1:1 Input Range Efficiency up to 69% 1kVDC and 2kVDC Isolation Option 1W SMD Package -40°C to +85°C Operating Temperature Range Continuous Short Circuit Protection ECONOLINE DC/DC-Converter Selection Guide Part Number SMD Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency (typ.) Capacitive Load (max.) RAZ-0505S* 5 5 200 67% 2200µF RAZ-1205S* 12 5 200 68% 2200µF RAZ-2405S* 24 5 200 69% 2200µF 1 Watt SMD Single Output * add Suffix “/H“ for 2kVDC/1min. Isolation - e.g. RAZ-0505S/H * add Suffix “-R“ for tape & reel packing - e.g. RAZ-1205S-R, RAZ-2405S/H-R Specifications (measured at TA = 25°C, nominal input voltage and rated output current unless otherwise specified) Input Voltage Range Output Voltage Accuracy -1% typ., ±5% max. Line Voltage Regulation (low line to high line at max. load) 1% max. Load Voltage Regulation (10% to 100% full load) 1% max. Output Ripple and Noise (20MHz BW) 50mVp-p typ., 75mVp-p max. Operating Frequency (Vin=nominal input) 20kHz min. / 35kHz typ. / 60kHz max. Efficiency at Full Load see Selection Guide Minimum Load = 0% Specifications valid for 10% minimum load only Isolation Voltage Isolation Voltage (tested for 1 second) 1250 VDC (rated for 1 minute**) 1000 VDC H-Suffix (tested for 1 second) 2500 VDC H-Suffix (rated for 1 minute**) 2000 VDC Isolation Capacitance 6pF typ., 10pF max. Isolation Resistance (Viso=500V) Short-Circuit Protection Operating Temperature Range RAZ 10GΩ min. Derating-Graph continuous (Ambient Temperature) 100 1.6g 80 3914 x 10³ hours 60 using MIL-HDBK 217F 855 x 10³ hours Certifications EN General Safety Report: SPCLVD1112018 EN Medical Safety Report: MDD1112018 + RM1112018 EN60950-1, 2nd Edition IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment Output Power (%) Detailed Information see Application Notes chapter "MTBF" 95% RH using MIL-HDBK 217F Package Weight } (*/H suffix) -55°C to +125°C Relative Humidity MTBF (+85°C) EN-60950-1 Certified EN-60601-1 Certified* -40°C to +85°C Storage Temperature MTBF (+25°C) RoHS 2011/65/EU 6/6 ±10% max. 40 30 20 0 Safe Operating Area 100 85 Operating Temperature °C 95 -40 0 50 150 **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. Refer to Application Notes E-64 REV: 0/2015 www.recom-power.com RAZ Series ECONOLINE DC/DC-Converter Typical Characteristics Efficiency / Load 100 2405 Efficiency % 80 60 0505 40 1205 20 0 0% 40% 80% 60% Total Output current (%) 20% 100% Note Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. Package Style and Pinning 8.70 18.00 7.80 7.20 Pin Connections Pin # Function 1.27x13 1,2 28 27 17 16 15 TOP VIEW Pb 12 12 13 14 NC 13 -Vout 14 +Vout 27 -Vin NC = No Connection 1.27 11.80 RECOM RAZ-XX05S 9.00 1.40 Recommended Footprint Details +Vin 12,15~17,28 RAZ 10.65 Unit: Tolerance: mm ± 0.25 mm 0.90 13*1.27= 16.51 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 E-65