● ● ● ● ● ● ● Features Unregulated Converter Description Industry Standard Pinout 1kVDC or 2kVDC Isolation UL94V-0 Package Material Optional Continuous Short Circuit Protected Fully Encapsulated Custom Solutions Available Efficiency to 85 % ECONOLINE DC/DC-Converter with 3 year Warranty The RE DC/DC converters are typically used in general purpose power isolation and voltage matching applications, and feature a full industrial operating temperature range of -40°C to +85°C without derating. 1 Watt SIP7 Single Output Selection Guide Part Number SIP 7 Output Voltage (VDC) Output Current (mA) Efficiency (2kV) Input Voltage (VDC) (%) Max Capacitive Load (1) RE-xx3.3S (H) 3.3, 5, 12, 15, 24 3.3 303 75 2200µF RE-xx05S (H) 3.3, 5, 12, 15, 24 5 200 78-80 1000µF RE-xx09S (H) 3.3, 5, 12, 15, 24 9 111 78-80 1000µF RE-xx12S (H) 3.3, 5, 12, 15, 24 12 83 80-84 470µF RE-xx15S (H) 3.3, 5, 12, 15, 24 15 66 80-84 470µF RE-xx24S (H) 3.3, 5, 12, 15, 24 24 42 78-85 220µF xx = Input Voltage (other input and output voltage combinations available on request) * add Suffix “P” for Continuous Short Circuit Protection, e.g. RE-0505S/P, RE-0505S/HP RoHS 2011/65/EU 6/6 Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range Output Voltage Accuracy ±5% Line Voltage Regulation 3.3V output type 20% max. (10% to 100% full load) 5V output type 15% max. 9V, 12V, 15V, 24V output types 10% max. Output Ripple and Noise (20MHz limited) 50kHz min. / 100kHz typ. / 105kHz max. Efficiency at Full Load 70% min. / 80% typ. Minimum Load = 0% Specifications valid for 10% minimum load only. (tested for 1 second) 1000VDC (rated for 1 minute**) 500VAC / 60Hz H-Suffix (tested for 1 second) 2000VDC H-Suffix (rated for 1 minute**) 1000VAC / 60Hz Isolation Capacitance (Ambient Temperature) 20pF min. / 75pF max. Isolation Resistance Short Circuit Protection P-Suffix 10 GΩ min. 100 1 Second 80 Continuous Operating Temperature Range (free air convection) -40°C to +85°C (see Graph) Storage Temperature Range -55°C to +125°C Relative Humidity 95% RH Package Weight 2.2g Packing Quantity 25 pcs per Tube (+85°C) Derating-Graph using MIL-HDBK 217F Detailed Information see Application Notes chapter "MTBF" using MIL-HDBK 217F Output Power (%) Isolation Voltage } RE 100mVp-p max. Operating Frequency MTBF (+25°C) EN-60950-1 Certified UL-60950-1 Certified 1.2%/1% of Vin typ. Load Voltage Regulation Isolation Voltage E-358085 ±10% 60 40 30 20 0 Safe Operating Area -40 0 50 85 Operating Temperature °C 100 150 992 x 103 hours 145 x 103 hours continued on next page **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. www.recom-power.com REV: 0/2015 Refer to Application Notes E-53 RE Series ECONOLINE DC/DC-Converter Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Certifications CB Test Report Report: US/15348/UL UL General Safety Report: E358085 IEC 60950-1:2005 2nd Edition EN General Safety Report: SPCLVD1109103 UL 60950-1 2nd Edition EN60950-1:2006 + A12:2011 Notes Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. Typical Characteristics RE-xx05S Efficiency / Load Efficiency / Load 1205 3.305 80 80% 0 Deviation / Load 3.305 -10.000 0 100% 0% 1205 0% 20% 40% 60% Total Output current (%) 80% 100% 60% 80% 100% Deviation / Load 0512 15.000 20.000 1212 10.000 5.000 0.000 3.312 -5.000 -10.000 40% 20% Total Output current (%) 25.000 20.000 0505 5.000 -5.000 80% 60% Deviation / Load 10.000 0.000 40% 20% 25.000 Deviation from Nominal (%) 20.000 0% 3.315 20 Total Output current (%) 25.000 15.000 Efficiency % 20 100% 0515 40 Deviation from Nominal (%) Efficiency % Efficiency % 0% 20% 40% 60% Total Output current (%) 60 3.312 40 20 1215 80 60 0505 40 Deviation from Nominal (%) 100 1212 0512 80 60 RE Efficiency / Load 100 100 0 RE-xx15S RE-xx12S 0% 20% 40% 60% Total Output current (%) 80% 100% 0515 15.000 3.315 10.000 5.000 0.000 1215 -5.000 -10.000 0% 20% 40% 60% Total Output current (%) 80% 100% Package Style and Pinning (mm) 7 PIN SIP Package 10.20 6.00 RECOM RE-0505S **** RECOM RE-0505S **** 0.51 typ. 1 2 0.51 typ. 4.10 Recommended Footprint Details 19.60 1.27 Bottom View 2.0 12.70 0.25 4 6 RE Pin Connections 1.00 ø+0.15/0 Pin # 2.54 2 –Vin 4 –Vout 2.54 1 Top View Single +Vin 6 +Vout XX.X ± 0.5 mm XX.XX ± 0.25 mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. E-54 REV: 0/2015 www.recom-power.com