Features Unregulated Converters ● ● ● ● ● ● ● ● ● UL/CSA and EN Safety certified EN-60601 for Medical Applications Isolation 6.4kVDC Optional Continuous Short Circuit Protected Unique Transformer System Compact SIP7 Package /X2 Version with >9mm Input/Output Clearance Suitable for IGBT Applications Very Low Isolation Capacitance ECONOLINE DC/DC-Converter with 3 year Warranty 2 Watt SIP 7 Single & Dual Output The RxxP2xxS_D Series of DC/DC Converters are certified to UL/CSA-60950 and UL/CSA 60601as well as EN-60950 and EN60601. This makes them ideal for medical and safety applications where approved isolation is required. The /X2 version has an input/output clearance of more than 9mm. Description Selection Guide Part Numbe SIP 7 Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency Std (%) Max Capacitive Load(1) RxxP23.3S* 5, 12, 15, 24 3.3 600 70 3300µF RxxP205S* 5, 12, 15, 24 5 400 70-75 1200µF RxxP209S* 5, 12, 15, 24 9 222 70-75 1200µF RxxP212S* 5, 12, 15, 24 12 167 70-75 680µF RxxP215S* 5, 12, 15, 24 15 132 75-80 680µF RxxP23.3D* 5, 12, 15, 24 ±3.3 ±300 70 ±1500µF RxxP205D* 5, 12, 15, 24 ±5 ±200 70-75 ±470µF RxxP209D* 5, 12, 15, 24 ±9 ±111 70-75 ±470µF RxxP212D* 5, 12, 15, 24 ±12 ±85 70-75 ±330µF EN-60950-1 Certified IEC/EN-60601-1 Certified* UL/CSA 60950-1 Certified* RxxP215D* 5, 12, 15, 24 ±15 ±66 75-80 ±330µF * +15/-9 Version excluded RxxP21509D* 5, 12, 24 +15/-9 +67/-111 70-82 ±330µF xx = Input Voltage. Other input and output voltage combinations available on request. * add Suffix “P” for Continuous Short Circuit Protection, e.g. R05P205S/P, R05P205D/P * add Suffix “/X2” for single output with alternative pinout, e.g. R05P205S/X2, R05P205S/P/X2 RoHS 2011/65/EU 6/6 E-358085 RxxP2xx Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range ±10% Output Voltage Accuracy ±5% Line Voltage Regulation 1.2%/1% of Vin typ. Load Voltage Regulation 3.3, 5V output types 15% max. (10% to 100% full load) other output types, RxxP21509D 10% max. Output Ripple and Noise (20MHz BW) 100 20kHz min. / 50kHz typ. 80 65% min. / 80% max. Minimum Load = 0% Specifications valid for 10% minimum load only. (tested for 1 second) 6400VDC (rated for 1 minute**) 3200VAC / 60Hz 1.5pF min / 10pF max. Isolation Resistance 15 GΩ min. Short Circuit Protection 1 Second P-Suffix Output Power (%) RxxP21509D 20kHz min. / 50kHz typ. / 85kHz max. Efficiency at Full Load Isolation Capacitance (Ambient Temperature) 200mVp-p max. Operating Frequency Isolation Voltage Derating-Graph 60 40 Safe Operating Area 20 0 -40 0 50 90 100 95 Operating Temperature °C 150 Continuous continued on next page **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. E-96 REV: 1/2015 Refer to Application Notes www.recom-power.com RxxP2xxS_D Series ECONOLINE DC/DC-Converter Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Operating Temperature Range (free air convection, without derating) -40°C to +90°C (see Graph) Storage Temperature Range -55°C to +125°C Relative Humidity 95% RH Package Weight 4.3g Packing Quantity 25 pcs per Tube MTBF (+25°C) . (+85°C) } Detailed Information see Application Notes chapter "MTBF" 2113/2434 x 103 hours Single/Dual using MIL-HDBK 217F Single/Dual 299/334 x 103 hours using MIL-HDBK 217F Certifications UL/cUL General Safety Report: E358085-A8 UL 60950-1 2nd Ed. EN General Safety Report: SPCLVD1305069 EN Medical Safety Report: SPCMDD1205098-4 EN60950-1:2006 + A12: 2011 IEC/EN60601-1:2006, 3rd Edition Notes Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. Tolerance Envelope +10% Typical L o +5% V Nom. +5% ad Line 1.5% Output Voltage 5% 10% 50% 100% Output Load Current (%) RxxP2xx Typical Characteristics Deviation / Load Efficiency / Load R05P205S, R12P205S 80 R05P209S 20.000 60 40 Efficiency % RxxP205S RxxP209S 25.000 Deviation from Nominal (%) 100 R12P09S 20 0 0% 20% 40% 60% 80% 5.000 0.000 -5.000 -10.000 100% R05P205D, R12P205D R05P209D Deviation from Nominal (%) 20 0% 20% 40% 60% Total Output current (%) www.recom-power.com 20.000 R12P209D 40 0 R12P205S 0% 20% 40% 60% Total Output current (%) 80% 100% 25.000 60 Efficiency % R05P205D R05P209D R12P209S Deviation / Load Efficiency / Load 80 R05P209S 10.000 Total Output current (%) 100 R05P205S 15.000 REV: 1/2015 80% 100% 15.000 R12P205D R05P209D R05P205D 10.000 5.000 0.000 -5.000 -10.000 R12P209D 0% 20% 40% 60% Total Output current (%) 80% 100% E-97 RxxP2xxS_D Series ECONOLINE DC/DC-Converter Typical Characteristics RxxP212S RxxP215S Deviation / Load Efficiency / Load 25.000 100 R05P212S R12P215S 60 20.000 Deviation from Nominal (%) 80 R05P215S Efficiency % 40 R12P215S 20 0 0% 20% 40% 80% 60% R05P212S 15.000 R05P212S 10.000 5.000 0.000 R12P212S -5.000 -10.000 100% Total Output current (%) R12P215S 0% 20% 40% 60% Total Output current (%) 80% 100% RxxP212D RxxP215D Deviation / Load Efficiency / Load 25.000 100 R12P215D RxxP2xx 60 20.000 Deviation from Nominal (%) R12P212D 80 R05P215D Efficiency % 40 R05P212D 20 0 0% 20% 40% 80% 60% R12P212D R05P212D 15.000 R05P212D 10.000 5.000 0.000 R12P215D -5.000 -10.000 100% Total Output current (%) 0% 20% 40% 60% Total Output current (%) 80% 100% Application IGBT Application Circuit IGBT Driver Control Signal Rg IGBT +Vout 7 1 C2 + -Vin Isolated DC/DC Converter C1 + 2 6 C3 + 5 -Vout E-98 REV: 1/2015 www.recom-power.com RxxP2xxS_D Series ECONOLINE DC/DC-Converter Package Style and Pinning (mm) 7 PIN SIP Package 9.8 12.5 7.5 3.2 4.1 tc RECOM R05P205D **** 7.62 pin clearance 1.00ø+0.15/0 2.54 0.25 Top View 1.00ø+0.15/0 2.54 0.25 2.4 10.16 pin clearance RECOM RxxP2xxS **** RECOM RxxP2xxS/X2 **** 1 2 5 6 7 5 7 1 2 6 7 +15/-9 Output RECOM RxxP21509D **** 2.54 19.5 1.9 RECOM RxxP2xxD **** Recommended Footprint Details 15.24 /X2 Bottom View /X2 Single Output 1 2 0.5 2.4 1.9 Single Output 0.5 19.5 Bottom View Dual Output 2.54 /X2 Top View 1 2 5 6 7 Pin Connections Pin # 1 2 5 6 7 Single +Vin -Vin –Vout No Pin +Vout Dual +Vin -Vin –Vout Com +Vout /X2 +Vin -Vin No Pin -Vout +Vout RxxP2xx XX.X ± 0.5 mm XX.XX ± 0.25 mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 1/2015 E-99