Features Unregulated Converters ● ● ● ● ● ● Micro Size SIP 6 Package Industry Standard Pinout Power Sharing on Dual Output Version 3kVDC Isolation Optional Continuous Short Circuit Protected Efficiency to 85 % ECONOLINE DC/DC-Converter with 3 year Warranty The RBM Micro Size DC/DC-Converter complements Recom’s industrial range of converters. This range is widely used for pcb distributed power systems and combines small package size, high efficiency, 3kVDC isolation and low output ripple. Description The extended operating temperature range covering –40°C to +85°C is a standard feature. The full rated power can be taken from a single pin of this dual output converter, provided this does not exceed 1 Watt. 1 Watt SIP 6 Micro Size, Single & Dual Output Selection Guide Part Number SIP 6 Micro Size Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency (%) Max Capacitive Load(1) RBM-xx05S 5, 12 5 200 70-78 1000µF RBM-xx12S 5, 12 12 83 78-80 470µF RBM-xx15S 5, 12 15 66 80-84 470µF RBM-xx05D 5, 12 ±5 ±100 74-78 ±470µF RBM-xx12D 5, 12 ±12 ±41 80-82 ±220µF RBM-xx15D 5, 12 ±15 ±33 80-84 ±220µF xx = Input Voltage. Other input and output voltage combinations available on request. * add Suffix “P” for Continuous Short Circuit Protection, e.g. RBM-0505S/P, RBM-0505D/P RoHS 2011/65/EU 6/6 Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range ±10% Output Voltage Accuracy ±5% Line Voltage Regulation Load Voltage Regulation (10% to 100% full load) 1.2%/1% of Vin typ. 15% max 10% max 5V output type 12, 15V output types Output Ripple and Noise (20MHz limited) 70% min. / 80% typ. Minimum Load = 0% Specifications valid for 10% minimum load only. (tested for 1 second) (rated for 1 minute**) 3000VDC 1500VAC / 60Hz Isolation Capacitance 20pF min. / 65pF max. Isolation Resistance 100 -55°C to +125°C 80 Relative Humidity 95% RH Package Weight 1.3g Packing Quantity 30 pcs per Tube Detailed Information see Application Notes chapter "MTBF" using MIL-HDBK 217F using MIL-HDBK 217F 1005 x 103 hours 195 x 103 hours Certifications CB Test Report Report: US/15348/UL UL General Safety Report: E358085 EN General Safety Report: SPCLVD1109103 EN Medical Safety Report: MDD1205098-4 + RM1205098-4IEC/EN 60601-1 3rd Edition Output Power (%) -40°C to +85°C (see Graph) Storage Temperature Range 60 40 30 20 0 Safe Operating Area -40 0 50 85 Operating Temperature °C 100 150 IEC 60950-1:2005 2nd Ed. UL 60950-1 2nd Ed. EN60950-1:2001 + A11:2004 Medical Report + ISO14971 Risk Assessment www.recom-power.com (Ambient Temperature) 1 Second Continuous Operating Temperature Range (free air convection) } Derating-Graph 15 GΩ min. Short Circuit Protection P-Suffix MTBF (+25°C) (+85°C) RBM 50kHz min. / 100kHz typ. / 105kHz max. Efficiency at Full Load Isolation Voltage EN-60950-1 Certified UL-60950-1 Certified EN-60601-1 Certified 100mVp-p max. Operating Frequency E-358085 REV: 0/2015 **Any data referred to in this datasheet are of indivative nature and based on our practical experience only. For further details, please refer to our Application Notes. Refer to Application Notes E-43 RBM Series ECONOLINE DC/DC-Converter Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Notes Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. Typical Characteristics RBM-xx05S RBM-xx12S Efficiency / Load Efficiency / Load 100 80 100 1205 3.305 60 60 0505 20 0% 20% 40% 60% Total Output current (%) 80% 3.312 40 Efficiency % Efficiency % 40 0 20 0 100% 0% 20.000 0505 Deviation from Nominal (%) -10.000 RBM Deviation from Nominal (%) 3.305 5.000 -5.000 1205 0% 20% 40% 60% Total Output current (%) 80% 0.000 -10.000 100% 1205 3.305 20 0% 20% 40% 60% Total Output current (%) 80% 100% 3.312 20 0 0% 40% 20% 60% 80% 100% Total Output current (%) Deviation / Load Deviation / Load 25.000 3.305 20.000 0505 Deviation from Nominal (%) Deviation from Nominal (%) 0512 1212 80 Efficiency % Efficiency % 0505 25.000 E-44 100% Efficiency / Load 40 10.000 5.000 -10.000 80% 100 40 -5.000 0% 20% 40% 60% Total Output current (%) RBM-xx12D 60 0.000 1212 3.312 -5.000 60 20.000 100% 5.000 Efficiency / Load 15.000 80% 10.000 100 0 0512 15.000 RBM-xx05D 80 60% 25.000 10.000 0.000 40% Deviation / Load Deviation / Load 20.000 20% Total Output current (%) 25.000 15.000 1212 0512 80 1205 0% 20% 40% 60% Total Output current (%) 80% 100% REV: 0/2015 15.000 0512 1212 10.000 5.000 0.000 -5.000 -10.000 3.312 0% 20% 40% 60% Total Output current (%) 80% 100% www.recom-power.com RBM Series ECONOLINE DC/DC-Converter Typical Characteristics RBM-xx15S RBM-xx15D Efficiency / Load Efficiency / Load 100 100 1215 80 60 60 0515 3.315 20 0% 40% 20% 80% 60% 1215 40 Efficiency % Efficiency % 40 0 100% 20 0 0% Total Output current (%) 40% 80% 60% 100% Deviation / Load 25.000 25.000 0515 15.000 20.000 3.315 Deviation from Nominal (%) 20.000 Deviation from Nominal (%) 20% Total Output current (%) Deviation / Load 10.000 5.000 0.000 1215 -5.000 -10.000 3.315 0515 80 0% 20% 40% 60% Total Output current (%) 80% 100% 1215 15.000 0515 10.000 5.000 0.000 3.315 -5.000 -10.000 0% 20% 40% 60% Total Output current (%) 80% 100% RBM Package Style and Pinning (mm) SIP6 Micro Size Package 6.00 7.70 RECOM RBM-0505S **** 0.51 typ. Dual Output RECOM RBM-0505S **** RECOM RBM-0505D **** 1 2 0.51 typ. 4.10 Single Output 4 5 6 1 2 4 5 6 Recommended Footprint Details Pin Connections 1.00 ø+0.15/0 16.55 1.27 1.9 Bottom View 0.25 Pin # 2.54 12.70 2.54 Top View Single Dual 1 +Vin +Vin 2 –Vin –Vin 4 NC –Vout 5 –Vout Com 6 +Vout +Vout NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 E-45