● ● ● ● ● ● ● Features Unregulated Converters Description ECONOLINE Pot-Core Transformer - separated windings High 5.2kVDC Isolation in compact size Optional Continuous Short Circuit Protected Pin Compatible with RH and RK Series Approved for Medical and IGBT Applications UL and EN Certified Efficiency to 82 % DC/DC-Converter with 3 year Warranty The RP series has very high isolation of 5.2 kVDC in a compact size. The converters are EN-60601-1 certified, making them suitable for medical as well as IGBT driver applications. 1 Watt SIP 7 Single & Dual Output The /X2 version has rearranged pins to permit an input output seperation of more than 9mm. Selection Guide Part Number SIP 7 Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) RP-xx3.3S* 5, 9, 12, 15, 24 3.3 303 70 2200µF RP-xx05S* 5, 9, 12, 15, 24 5 200 70-72 1000µF RP-xx09S* 5, 9, 12, 15, 24 9 111 75 1000µF RP-xx12S* 5, 9, 12, 15, 24 12 84 75-78 470µF RP-xx15S* 5, 9, 12, 15, 24 15 66 80 470µF RP-xx24S* 5, 9, 12, 15, 24 24 42 80 220µF RP-xx3.3D* 5, 9, 12, 15, 24 ±3.3 ±152 70 ±1000µF RP-xx05D* 5, 9, 12, 15, 24 ±5 ±100 74-76 ±470µF RP-xx09D* 5, 9, 12, 15, 24 ±9 ±56 75 ±470µF RP-xx12D* 5, 9, 12, 15, 24 ±12 ±42 79-82 ±220µF RP-xx15D* 5, 9, 12, 15, 24 ±15 ±33 80-82 ±220µF RP-xx24D* 5, 9, 12, 15, 24 ±24 ±21 80 ±100µF 5, 12, 24 +15/-9 ±42 70-85 ±220µF (%) Max Capacitive Load(1) xx = Input Voltage. Other input and output voltage combinations available on request * add Suffix “P” for Continuous Short Circuit Protection, e.g. RP-0505S/P, RP-0505D/P * add Suffix “/X2” for single output with alternative pinning e.g. RP-0505S/X2, RP-0505S/P/X2 RoHS 2011/65/EU 6/6 E-358085 EN-60950-1 Certified IEC/EN-60601-1 Certified* CSA/UL-60950-1 Certified* * +15/-9 Version excluded RP Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range ±10% Output Voltage Accuracy ±5% Line Voltage Regulation 1.2%/1% of Vin typ. Load Voltage Regulation 3.3V output types 20% max. (10% to 100% full load) 5V output type 15% max. 9V, 12V, 15V, 24V output types, RP-xx1509D Output Ripple and Noise (20MHz limited) 50kHz min. / 100kHz typ. / 120kHz max. RP-xx1509D 50kHz min / 94kHz typ. Efficiency at Full Load 70% min. / 80% typ. Minimum Load = 0% Specifications valid for 10% minimum load only. Isolation Voltage (tested for 1 second) 5200VDC (rated for 1 minute**) 2600VAC / 60Hz Isolation Capacitance 20 GΩ min. Short Circuit Protection 1 Second P-Suffix Continuous 80 60 30 40 Safe Operating Area 20 0 -40 0 50 100 85 Operating Temperature °C 150 **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. -40°C to +90°C (see Graph) continued on next page E-66 100 4pF min. / 10pF max. Isolation Resistance Operating Temperature Range (free air convection, without derating) (Ambient Temperature) 10% max. 100mVp-p max. Operating Frequency Derating-Graph Output Power (%) RP RP-xx1509D Efficiency REV: 1/2015 Refer to Application Notes www.recom-power.com RP Series ECONOLINE DC/DC-Converter Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Storage Temperature Range -55°C to +125°C Relative Humidity 95% RH Package Weight 2.4g Packing Quantity 25 pcs per Tube MTBF (+25°C) (+85°C) } Detailed Information see Application Notes chapter "MTBF" using MIL-HDBK 217F 928 x 103 hours using MIL-HDBK 217F 150 x 103 hours Certifications CSA General Safety Report: E358085 CSA C22.2 No. 60950-1-03 UL General Safety Report: E358085 EN General Safety Report: SPCLVD1109103 EN Medical safety Report: SPCMDD1205098-4 UL 60950-1 2nd Ed. EN60950-1:2006 + A12:2011 IEC/EN60601-1:2006, 3rd Edition Notes Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. Typical Characteristics RP-xx12S RP-xx05S 100 0505 1205 0515 80 60 40 40 40 20 0% 40% 20% 80% 60% 20 0 0% 100% 100% Deviation / Load 20.000 Deviation from Nominal (%) 0505 10.000 5.000 0.000 1205 -5.000 0% 20% 40% 60% Total Output current (%) 80% 100% 5.000 0.000 1212 -5.000 0% 20% 40% 60% Total Output current (%) 0505 Efficiency % 40 20 40% 60% Total Output current (%) 80% 100% -10.000 1212 80% 100% 1215 60 40 40 20 0% 20% 40% 60% Total Output current (%) 80% 0515 80 60 0 0% 20% 40% 60% Total Output current (%) 0.000 -5.000 RP-xx15D Efficiency % 60 20% 100% 5.000 Efficiency / Load 0512 80 0% 80% 0515 100 100 1205 100% 10.000 Efficiency / Load 80 80% 15.000 RP-xx12D Efficiency / Load 60% 20.000 10.000 RP-xx05D 100 40% 20% Deviation / Load 0512 15.000 -10.000 0% 25.000 Deviation from Nominal (%) 20.000 0 Total Output current (%) 25.000 15.000 0 80% 60% 20 Total Output current (%) Deviation / Load -10.000 40% 20% 1215 100% 1215 20 0 0% 20% 40% 60% 80% 100% Total Output current (%) continued on next page www.recom-power.com REV: 1/2015 E-67 RP 0 Efficiency % 60 25.000 Deviation from Nominal (%) 1212 60 Total Output current (%) Efficiency % 100 0512 80 Efficiency % Efficiency % 80 Efficiency / Load Efficiency / Load Efficiency / Load 100 RP-xx15S RP Series ECONOLINE DC/DC-Converter Typical Characteristics RP-xx05D RP-xx12D Deviation / Load 25.000 25.000 20.000 Deviation from Nominal (%) 0505 15.000 10.000 5.000 0.000 1205 -5.000 0% 20% 40% 60% Total Output current (%) 100% 80% 20.000 0512 15.000 Deviation from Nominal (%) 20.000 Deviation from Nominal (%) Deviation / Load Deviation / Load 25.000 -10.000 RP-xx15D 10.000 5.000 0.000 1212 -5.000 -10.000 0% 20% 40% 60% Total Output current (%) 15.000 10.000 5.000 0.000 -5.000 -10.000 100% 80% 0515 1215 0% 20% 40% 60% Total Output current (%) 80% 100% Application IGBT Application Circuit Rg IGBT Driver Control Signal IGBT +Vout 7 1 C2 + -Vin Isolated DC/DC Converter C1 + 6 C3 + 5 2 RP -Vout Package Style and Pinning (mm) 7 PIN SIP Package 10.20 4.10 1.27 2.0 7.05 RECOM RP-xxxxD **** 2.0 Dual Output RECOM RP-xxxxS **** RECOM RP-xxxxD **** 0.51 typ. 0.51 typ. 19.65 Bottom View 0.25 Bottom View /X2 Pin Connections Top View Standard Version 1.00 ø+0.15/0 2.54 Pin # Single Dual /X2 1 +Vin +Vin +Vin 2 –Vin –Vin -Vin 5 –Vout –Vout No Pin 6 No Pin Com -Vout 7 +Vout +Vout +Vout XX.X ± 0.5 mm XX.XX ± 0.25 mm 2.54 1 2 5 6 7 Single Output/X2 9.65 pin clearance 7 5 2.54 2.54 0.25 1 2 Recommended Footprint Details 7.11 pin clearance 19.65 1.27 Single Output RECOM RP-xxxxS/X2 **** 1 2 6 7 Dual Output RECOM RP-xx1509D **** Top View /X2 Version 1 2 5 6 7 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. E-68 REV: 1/2015 www.recom-power.com