Features Unregulated Converters Description ● ● ● ● ● ● ● ● UL/CSA and EN-60950-1 Safety certified EN-60601 for Medical Applications 6kVDC Isolation Optional Continuous Short Circuit Protection Efficiency up to 82% Space Saving „Skinny DIP“ Package Very Low Isolation Capacitance Suitable for IGBT Applications ECONOLINE DC/DC-Converter with 3 year Warranty 2 Watt DIP24 Miniature Single & Dual Output Very high isolation in a small size are the main features of this miniature DIP24 converter, ideal for highly sophisticated industrial, test and measurement and medical designs where board space is at a premium. Selection Guide Part Number SIP 7 Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency Std (%) Max Capacitive Load(1) RV-xx3.3S* 3.3, 5, 12, 15, 24 3.3 RV-xx05S* 3.3, 5, 12, 15, 24 5 600 70 3300µF 400 70-75 1200µF RV-xx09S* 3.3, 5, 12, 15, 24 9 222 70-75 1200µF RV-xx12S* RV-xx15S* 3.3, 5, 12, 15, 24 12 167 70-75 680µF 3.3, 5, 12, 15, 24 15 132 75-80 680µF RV-xx24S* 3.3, 5, 12, 15, 24 24 83 75-80 220µF RV-xx3.3D* 3.3, 5, 12, 15, 24 ±3.3 ±300 70 ±1500µF RV-xx05D* 3.3, 5, 12, 15, 24 ±5 ±200 70-75 ±470µF RV-xx09D* 3.3, 5, 12, 15, 24 ±9 ±111 70-75 ±470µF RV-xx12D* 3.3, 5, 12, 15, 24 ±12 ±85 70-75 ±220µF RV-xx15D* 3.3, 5, 12, 15, 24 ±15 ±66 75-80 ±220µF RV-xx24D* 3.3, 5, 12, 15, 24 ±24 ±42 75-80 ±100µF 5, 12, 24 +15/-9 +67/-111 70-82 ±330µF RV-xx1509D xx = Input Voltage. Other input and output voltage combinations available on request. * add Suffix “P” for Continuous Short Circuit Protection, e.g. RV-0505S/P, RV-0505D/P RoHS 2011/65/EU 6/6 E358085 EN-60950-1 Certified IEC/EN-60601-1 Certified* UL/CSA 60950-1 Certified* * +15/-9 Version excluded RV Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range ±10% Output Voltage Accuracy ±5% Line Voltage Regulation (10% to 100% full load) 3.3V output types 20% max. 5V output type 15% max. 9V, 12V, 15V, 24V output types, RV-xx1509D 10% max. Output Ripple and Noise (20MHz limited) 100 20kHz min. / 50kHz typ. / 85kHz max. RV-xx1509D Efficiency at Full Load Isolation Voltage (Ambient Temperature) 200mVp-p max. Operating Frequency Minimum Load = 0% Derating-Graph 70% min. / 75% typ. Specifications valid for 10% minimum load only. (tested for 1 second) 6000VDC (rated for 1 minute**) 3000VAC / 60Hz Isolation Capacitance 2pF min. / 12pF max. Isolation Resistance 15 GΩ min. Short Circuit Protection 60 40 Safe Operating Area 20 0 -40 0 50 90 100 95 Operating Temperature °C 150 1 Second P-Suffix Operating Temperature Range (free air convection, without derating) 80 20kHz min. / 47kHz typ. Output Power (%) Load Voltage Regulation 1.2%/1% of Vin typ. Continuous -40°C to +90°C (see Graph) Storage Temperature Range **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. -55°C to +125°C continued on next page Refer to Application Notes www.recom-power.com REV: 0/2015 E-109 RV Series ECONOLINE DC/DC-Converter Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)) Relative Humidity 95% RH Package Weight 9g Packing Quantity 15 pcs per Tube MTBF (+25°C) Detailed Information see (+85°C) Application Notes chapter "MTBF" } Certifications using MIL-HDBK 217F 1154 x 103 hours using MIL-HDBK 217F 168 x 103 hours UL/cUL General Safety Report: E358085 UL 60950-1 2nd Ed. EN General Safety Report: SPCLVD1109103 EN Medical Safety Report: SPCMDD1205098-4 EN60950-1:2006 + A12: 2011 IEC/EN60601-1:2006, 3rd Edition Notes Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. Tolerance Envelope +10% Typica l +6% Load Line Output Voltage V Nom. 10% 50% +5% 2.5% 5% 100% Output Load Current (%) Typical Characteristics RV-xx05S Efficiency / Load Deviation / Load 25.000 1205 80 20.000 Deviation from Nominal (%) RV 100 60 0505 Efficiency % 40 20 0 0% 20% 40% 80% 60% 100% 0505 15.000 10.000 5.000 0.000 -5.000 -10.000 Total Output current (%) 1205 0% 20% 40% 60% Total Output current (%) 80% 100% RV-xx12S Deviation / Load Efficiency / Load 25.000 100 1212 20.000 Deviation from Nominal (%) 80 60 0512 Efficiency % 40 20 0 0% 20% 40% 60% 80% 100% Total Output current (%) E-110 REV: 0/2015 0512 15.000 10.000 5.000 0.000 -5.000 -10.000 1212 0% 20% 40% 60% Total Output current (%) 80% 100% www.recom-power.com RV Series ECONOLINE DC/DC-Converter Typical Characteristics RV-xx05D Deviation / Load Efficiency / Load 100 0505 1205 20.000 Deviation from Nominal (%) 80 25.000 60 Efficiency % 40 20 0 0% 20% 40% 80% 60% 0505 15.000 10.000 5.000 0.000 1205 -5.000 -10.000 100% Total Output current (%) 0% 20% 40% 60% Total Output current (%) 80% 100% RV-xx12D Efficiency / Load Deviation / Load 100 25.000 1212 20.000 60 0512 Efficiency % 40 20 0 0% 20% 40% 60% 80% 100% 0512 15.000 10.000 RV Deviation from Nominal (%) 80 5.000 0.000 1212 -5.000 -10.000 Total Output current (%) 0% 20% 40% 60% Total Output current (%) 80% 100% Applications IGBT Application Circuit IGBT Driver Control Signal Rg IGBT +Vout 7 1 C2 + -Vin Isolated DC/DC Converter C1 + 2 6 C3 + 5 -Vout www.recom-power.com REV: 0/2015 E-111 RV Series ECONOLINE DC/DC-Converter Package Style and Pinning (mm) 24 PIN DIP Miniature Package Style Single & Dual Output, RV-xx1509D 14.70 2.54 x 11=27.94 17 16 15 14 13 24 23 RECOM RV-0505S 11.10 0.40 **** 4.10 0.60 0.25 2.2 15.24 0.50±0.05 8 9 10 11 12 1 2 16.95 max. Recommended Footprint Details 1 2 1.0ø+0.15/0 2.54 32.35 8 9 10 11 12 Bottom View 16.10 24 23 2.54 17 16 15 14 13 Top View Pin Connections Single Pin # Dual 1 +Vin 1 +Vin 2 -Vin 2 -Vin NC 8, 17 -Vout Pin # 8, 9, 11, 14 10, 15 -Vout 9, 11, 14,16, 23, 24 NC 12 & 13 +Vout 10 & 15 Com NC 12, 13 +Vout 16, 17, 23, 24 RV Pin Connections NC = No Connection NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. E-112 REV: 0/2015 www.recom-power.com