Features ● ● ● ● ● Unregulated Converter 1 : 1 Input Range 0.25W SIP4 Package Efficiency up to 82% 1kVDC and 2kVDC Isolation Option Operating Temperature from -40°C to +100°C ECONOLINE DC/DC-Converter with 3 year Warranty Description The RM/E series DC/DC converter has been designed to offer exceptionally high efficiency, low quiescent current and an extended operating temperature range. Uses include battery powered supplies, high efficiency designs or high temperature applications. Selection Guide Part Number SMD Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency typ. (%) Max Capacitive Load(1)** RM-3.305S/E* 3.3 5 50 80 1000µF RM-0505S/E* 5 5 50 82 1000µF RM-1205S/E* 12 5 50 78 1000µF 0.25 Watt SIP4 Single Output Other input and output voltage combinations available on request *add Suffix „H“ for 2 kVDC Isolation, e.g. RM-3.305S/HE RoHS Specifications (measured at TA = 25°C, nominal input voltage full load and after warm-up) Input Voltage Range ±10% max. Voltage set accuracy 100% Load/nominal Vin Line Regulation Low Line to High Line @ max. Load Load Regulation (10% to 100% Load) Ripple & Noise @ 20MHz BW RM-3.305S/E 35mVp-p typ. / 60mVp-p max. others 35mVp-p typ. / 50mVp-p max. Efficiency 100% Load -2% typ. / ±5% max. 1,2% typ. 4% typ. / 10% max. -40°C to + 100°C Storage Temperature -55°C to +125°C (tested for 1 second) 1000VDC (rated for 1 minute**) 500VAC / 60Hz H-Suffix (tested for 1 second) 2000VDC H-Suffix (rated for 1 minute**) 1000VAC / 60 Hz Isolation Capacitance Isolation Resistance 10 GΩ min. 95% max. Vin (nom.) 20kHz min. / 70 kHz max. 100 1 Second 80 Using MIL-HDBK 217F (+100°C) 1352 x 10³ hours Using MIL-HDBK 217F (+25°C) 4494 x 10³ hours 60 Short-Circuit Protection MTBF Detailed Information see Application Notes chapter „MTBF“ Weight 1.4 g **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. Notes Note1: (Ambient Temperature) 75PF max. Viso = 500V Humidity Operating Frequency Derating-Graph Maximum capacitive load is defined as the capacitive load that will allow start up in under 1second without damage to the converter. Output Power (%) Isolation Voltage RM/E 70% min. Operating Temperature Isolation Voltage 2011/65/EU 6/6 Safe Operating Area 40 20 0 -40 0 50 100 Operating Temperature °C Refer to Application Notes E-4 REV: 0/2015 www.recom-power.com 150 RM/E Series ECONOLINE DC/DC-Converter Typical Characteristics Efficiency/Load Deviation/Load 25 +10% 20 VNOM Deviation from Nominal % +5% -1% -5% 15 3.305 10 0505 5 0 -5 10% 50% Efficiency % +5% 1205 -10 100% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Load % 100 90 80 70 60 50 40 30 20 10 0 0505 3.305 1205 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Load % +Vout and -Vout load current (%) Package Style and Pinning (mm) 1 6.00 2 3 4 RM/E BOTTOM VIEW TOP VIEW 11.50 1.00ø+0.15/-0 Pin Connections Pin # RECOM RM-0505S/E 10.00 1131 1 2 3 4 2.54 0.50 1 –Vin 2 +Vin 3 -Vout 4 +Vout UNIT: mm TOL.: ± 0.25 mm 4.10 2.54 2.54 Function TOP VIEW Footprint 7.62 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 E-5