Features Regulated Converter ● ● ● ● ● ● ● ● 1kVDC or 2kVDC Isolation SMD Package Styles Single Regulated Output (Internal Linear Regulator) UL94V-0 Package Material Optional Continuous Short Circuit Protected Fully Encapsulated Efficiency to 62 % Built-In EN55022 Class A Filter ECONOLINE DC/DC-Converter with 3 year Warranty 0.5 Watt SMD Isolated Single Output The R0.5Z series DC/DC converter has been designed for isolating or converting DC power rails where board space is at a premium. Although no larger than a standard unregulated SMD converter, the R0.5Z series also incorporates an internal linear regulator to deliver a stable output voltage which makes it ideal for powering logic level or supply voltage sensitive circuitry. Description Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Part Number SMD Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency (%) Max Capacitive Load(1) R0.5Z-xx05* 5, 12, 15, 24 5 100 50 1000µF R0.5Z-xx12* 5, 12, 15, 24 12 42 60 220µF R0.5Z-xx15* 5, 12, 15, 24 15 33 62 220µF xx = Input Voltage * add Suffix “P” for Continuous Short Circuit Protection, e.g. R0.5Z-0505/P * add Suffix „H“ for 2kVDC Isolation Voltage, e.g. R0.5Z-0505/H * add suffix -R for tape & reel packing e.g. R0.5Z-0505-R, R0.5Z.0505/P-R For more details and dimensions of the tapes and reels see Application Notes RoHS 2011/65/EU 6/6 EN-60950-1 Certified EN-60601-1 Certified* UL-60950-1 Certified Specifications (Core Operating Area) } www.recom-power.com REV: 0/2015 (*/H suffix) R0.5Z Derating-Graph (Ambient Temperature) 100 80 Output Power (%) Input Voltage Range ±5% Output Voltage Accuracy ±5% Line Voltage Regulation 1% max. Load Voltage Regulation (10% to 100% full load) 1% max. Output Ripple and Noise (20MHz limited) 100mVp-p max. Operating Frequency 20kHz min. / 50kHz typ. / 90kHz max. Efficiency at Full Load 50% min. / 60% typ. Minimum Load 10% (2) No Load Power Consumption 127mW min. / 155mW typ. / 320mW max. Isolation Voltage (tested for 1 second) 1000VDC (rated for 1 minute**) 500VAC / 60Hz Isolation Voltage H-Suffix (tested for 1 second) 2000VDC H-Suffix (rated for 1 minute**) 1000VAC / 60Hz Isolation Capacitance 25pF min. / 75pF max. Isolation Resistance 10 GΩ min. Short Circuit Protection 1 Second P-Suffix Continuous Operating Temperature Range (natural convection) -40°C to +85°C (see Graph) Storage Temperature Range -55°C to +125°C Reflow Temperature ROHS compliant 245°C (30 sec) max. Vapor Phase Process 230°C (90 sec) max. (for more details see Application Notes) Relative Humidity 95% RH Package Weight 1.2g Packing Quantity 33 pcs per tube 500 pcs per Reel' MTBF (+25°C) Detailed Information see using MIL-HDBK 217F 3947 x 103 hours (+85°C) Application Notes chapter "MTBF" using MIL-HDBK 217F 841 x 103 hours continued on next page E358085 60 40 Safe Operating Area 20 0 -40 0 50 85 100 150 Operating Temperature °C **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. Refer to Application Notes E-117 R0.5Z Series ECONOLINE DC/DC-Converter Specifications (Core Operating Area) Conducted / Radiated Emissions EN55022 Level A Certifications EN General Safety Report-No.: SPCLVD1211033-3 EN Medical Safety Report: MDD1205098-2 + RM1205098-2 EN60950-1:2006 + A12:2011 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment UL General Safety Report-No.: E358085 UL60950-1, 2nd Edition Notes Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter Note 2: The R0.5Z series requires a minimum of 10% load on the output to the maintain specified regulation. Operating under no-load conditions will not damage these devices; however, they may not meet all listed specifications. Typical Characteristics R0.5Z-xx05 R0.5Z-xx12 Efficiency / Load Efficiency / Load 60 40 40 Efficiency % Efficiency % R0.5Z 80 60 0505 0512 20 20% 40% 60% 80% 100 100% Total Output current (%) 2415 60 1212 1205 20 0 80 1215 0% 20% 40% 60% Total Output current (%) 80% 2405 40 Efficiency % 0515 80 0% Efficiency / Load 100 100 0 R0.5Z-xx15 2412 20 0 100% 0% 20% 40% 60% 80% 100% Total Output current (%) Package Style and Pinning (mm) 10 PIN Single SMD Package 15.24 10.7 10 RECOM R0.5Z-xxxx xxxx 7.05±0.5 6.8 7 1 2 8.50 11.10 2.54x4=10.16±0.5 4 5 Pin Connections 0.50 Bottom View 2.54±0.5 Pin # 12.00 10 1.20 7 Top View 1 2 4 5 1.80 Recommended Footprint Details Function 1 –Vin 2 +Vin 4 -Vout 5 -Vout 7 +Vout 10 NC NC= No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. E-118 REV: 0/2015 www.recom-power.com