● ● ● ● ● ● ● ● Features Regulated Converters Description DIP24 Low Profile Miniature Package 1kVDC Isolation Feedback Regulated Output 2:1 Wide Range Voltage Input Continuous Short Circuit Protection Less than 7mm Height SMD Pinning Option Efficiency to 87 % ECONOLINE DC/DC-Converter with 3 year Warranty 3 Watt DIP24/SMD Low Profile Package Single Output The RW-S series with 2:1 input voltage ranges and max. height of 7,0 mm has been designed for the industrial automation markets. They are aimed at applications where pcb-space is at a premium so SMD pinning is also available. The converters supply the full 3 watts without additional heat-sinks over the temperature range -40°C to +80°C. Selection Guide Part Number DIP24 Miniature Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency (%) Max Capacitive Load(1) RW-053.3S 4.5 – 9 3.3 650 68 4700µF RW-0505S 4.5 – 9 5 600 69 4700µF RW-0509S 4.5 – 9 9 333 70 3300µF RW-0512S 4.5 – 9 12 250 72 2200µF RW-0515S 4.5 – 9 15 200 73 2200µF RW-123.3S 9 – 18 3.3 650 70 4700µF RW-1205S 9 – 18 5 600 73 4700µF RW-1209S 9 – 18 9 333 78 3300µF RW-1212S 9 – 18 12 250 79 2200µF RW-1215S 9 – 18 15 200 79 2200µF RW-243.3S 18 – 36 3.3 650 75 4700µF RW-2405S 18 – 36 5 600 78 4700µF RW-2409S 18 – 36 9 333 82 3300µF RW-2412S 18 – 36 12 250 84 2200µF RW-2415S 18 – 36 15 200 85 2200µF RW-483.3S 36 – 72 3.3 650 73 4700µF RW-4805S 36 – 72 5 600 78 4700µF RW-4809S 36 – 72 9 333 82 3300µF RW-4812S 36 – 72 12 250 84 2200µF RW-4815S 36 – 72 15 200 85 2200µF RoHS 2011/65/EU 6/6 EN-60950-1 Certified RW-S Derating-Graph (Ambient Temperature) * add suffix "/SMD" for SMD package, e.g. RW-2405S/SMD 100 Output Power (%) RW-05xx types 5 4 Output Power (W) 3 2 80 67 60 40 25 20 0 Safe Operating Area -40 0 50 80 Operating Temperature °C 95 110 150 1 0 4.5 5 6 7 8 9 Input Voltage (V) Refer to Application Notes E-134 REV: 0/2015 www.recom-power.com RW-xxxxS Series ECONOLINE DC/DC-Converter Specifications (Core Operating Area) Input Voltage Range 2:1 Output Voltage Accuracy ±2% max. Line Voltage Regulation ±0.2% typ. Load Voltage Regulation (10% to 100% full load) ±0.5% max. 10% (2) Minimum Load Output Ripple and Noise (20MHz limited) 70mVp-p max. Operating Frequency 85kHz min. / 100kHz typ. Efficiency at Full Load See Selection Guide No Load Power Consumption 250mW max. Isolation Voltage (tested for 1 second) (rated for 1 minute**) 1000VDC 500VAC / 60Hz Isolation Capacitance 40pF min. / 60pF max. Isolation Resistance 1 GΩ min. Short Circuit Protection Continuous Operating Temperature Range (free air convection) -40°C to +80°C (see Graph) Storage Temperature Range -55°C to +125°C Relative Humidity 95% RH Package Weight DIP24 7g SMD 7.7g Packing Quantity MTBF (+25°C) (+80°C) 15 pcs per Tube } Detailed Information see Application Notes chapter "MTBF" using MIL-HDBK 217F 1034 x 103 hours using MIL-HDBK 217F 186 x 103 hours Certifications Report: SPCLVD1212007 EN60950-1:2006 + A11:2009+A1:2010+A12:2011 EN Medical Safety Report: MDD1205098-3 + RM1205098-3 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. Notes Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter Note 2: The RW-S series requires a minimum of 10% load on the output to maintain specified regulation. Operating under no-load conditions will not damage these devices; however, they may not meet all listed specifications. Typical Performance RW-1205S RW-2412S Efficiency / Load 100 100 80 80 60 60 40 40 Efficiency % Efficiency % Efficiency / Load 20 0 0% 20% 40% 60% 80% 100% Total Output current (%) www.recom-power.com 20 0 0% 20% 40% 60% 80% 100% Total Output current (%) REV: 0/2015 E-135 RW-S EN General Safety RW-xxxxS Series ECONOLINE DC/DC-Converter Package Style and Pinning (mm) 24 PIN DIP Miniature Package Style 14.73 24 15 14 13 RECOM RW-0505S 7.0 0.5 4.1 min. **** 16.35 1 2.54 x 11 Recommended Footprint Details 1.00 ø+0.15/0 32.26 1 10 11 12 Pin Connections Pin # 2.54 2.54 Bottom View Single 1 & 24 +Vin 10 & 15 -Vout 11 & 14 +Vout 12 & 13 -Vin NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm 15 14 13 24 10 11 12 Top View RW-S 24 PIN SMD Miniature Package Style 14.50 32.20 9.40 10.20 2.54 8.89 18.80 Recommended Footprint Details Pin area 0.1 x 0.50 Pin # 2.54 0.50 Pin Connections 1.54 2.03 10 11 12 1 2 3 16.0 Bottom View 17.24 15 14 13 24 23 22 21 11 x 2.54 Top View 19.27 1 Single 1 & 24 +Vin 10 & 15 -Vout 11 & 14 +Vout 12 & 13 -Vin others NC NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm 27.94 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. E-136 REV: 0/2015 www.recom-power.com