Features Unregulated Converters Description ● ● ● ● ● ● ● ● ● UL/CSA and EN Safety certified EN-61010 for Test, Measurement and Lab Use EN-60601 for Medical Applications Reinforced Isolation 6.4kVDC or 8kVDC Optional Continuous Short Circuit Protected Compact SIP7 Package Efficiency to 88% Very Low Isolation Capacitance /X2 Version with >9mm Input/Output Clearance ECONOLINE DC/DC-Converter with 3 year Warranty 2 Watt SIP 7 Single & Dual Output The RxxP2xxS_D Series of DC/DC Converters are certified to UL/CSA-60950 and UL/CSA 60601. This makes them ideal for medical and safety applications where approved or reinforced isolation is required. The reinforced versions are also EN61010-1 certified for Lab Equipment. The /X2 version has an input/output clearance of more than 9mm. Selection Guide Part Number SIP 7 Reinforced Isolation (kVDC) Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency Std (%) Max Capacitive Load(1) RxxP23.3S /R6.4 & /R8 5, 12, 15, 24 3.3 600 72-78 3300µF RxxP205S /R6.4 & /R8 5, 12, 15, 24 5 400 79-84 1200µF RxxP209S /R6.4 & /R8 5, 12, 15, 24 9 222 80-87 1200µF RxxP212S /R6.4 & /R8 5, 12, 15, 24 12 167 80-87 680µF RxxP215S /R6.4 & /R8 5, 12, 15, 24 15 132 80-88 680µF RxxP23.3D /R6.4 & /R8 5, 12, 15, 24 ±3.3 ±300 73-80 ±1500µF RxxP205D /R6.4 & /R8 5, 12, 15, 24 ±5 ±200 79-85 ±470µF RxxP209D /R6.4 & /R8 5, 12, 15, 24 ±9 ±111 80-87 ±470µF RxxP212D /R6.4 & /R8 5, 12, 15, 24 ±12 ±85 80-87 ±330µF RxxP215D /R6.4 & /R8 5, 12, 15, 24 ±15 ±66 80-88 ±330µF xx = Input Voltage. Other input and output voltage combinations available on request. * add Suffix “P” for Continuous Short Circuit Protection, e.g. R05P205S/P, R05P205D/P * add Suffix “/X2” for single output with alternative pinout, e.g. R05P205S/X2, R05P205S/P/X2 * add Suffix “/R6.4” or “/R8” for Reinforced Isolation, e.g. R05P205D/R6.4, R05P205S/P/X2/R8 RoHS 2011/65/EU 6/6 E-314885 EN-60950-1 Certified EN-60601-1 Certified UL/CSA 60950-1 Certified UL-60601 Certified EN-61010-1 Certified IEC-60601-1 CB Report RxxP2xx/R Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range ±10% Output Voltage Accuracy ±5% Line Voltage Regulation 1.2%/1% of Vin typ. Load Voltage Regulation 3.3, 5V output types 15% max. (10% to 100% full load) other output types 10% max. Output Ripple and Noise (20MHz BW) Derating-Graph (Ambient Temperature) 200mVp-p max. Operating Frequency 20kHz min. / 50kHz typ. / 85kHz max. 65% min. / 80% max. 100 Minimum Load = 0% Specifications valid for 10% minimum load only. 80 Isolation Voltage Isolation Capacitance /R6.4 (tested for 1 second) 6400VDC (rated for 1 minute**) 3200VAC / 60Hz /R8 (tested for 1 second) 8000VDC (rated for 1 minute**) 4000VAC / 60Hz 1.5pF min. / 10pF max. Isolation Resistance 15 GΩ min. Short Circuit Protection Output Power (%) Efficiency at Full Load 60 40 Safe Operating Area 20 0 -40 0 50 85 Operating Temperature °C 100 1 Second P-Suffix Continuous continued on next page **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. Refer to Application Notes E-100 REV: 1/2015 www.recom-power.com 150 RxxP2xxS_D /Rx Series ECONOLINE DC/DC-Converter Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Operating Temperature Range (free air convection) -40°C to +85°C (see Graph) Storage Temperature Range -55°C to +125°C Relative Humidity 95% RH Package Weight 4.3g Packing Quantity 25 pcs per Tube Potting Material MTBF (+25°C) Detailed Information see Application Notes chapter "MTBF" . (+85°C) Reinforced Reinforced Isolation Transformer Creepage Transformer Clearance PCB Creepage & Clearance Certifications Measurement, Control and Laboratory Use Safety CSA General Safety } /R6.4 Types /R6.4 Types /R6.4 Types Report: T1301251-313 Report: 2207629 UL/cUL Medical Safety CSA Medical Safety EN General Safety CB/EN Medical Safety ANSI/AAMI Medical Safety Report: 314885-A5 Report: 2207629 Report: SPCLVD1310079-1 Report: CA-10169-A1-UL Report: E314885-A5 Silicone Rubber Compound (UL94V-0) 1154 x 103 hours 168 x 103 hours 5.5 mm min. 5.5 mm min. 4.6 mm min. EN 61010-1 : 2010 UL 60950-1 1st Edition C22.2 No. 60950-1-03 UL60601-1 1st Edition CAN/CSA-22.2 No 601.1-M90 EN60950-1 : 2006 IEC/EN 60601-1 3rd Edition ES60601-1 3rd Edition Notes Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. Tolerance Envelope RxxP2xx/R +10% Typical L o +5% V Nom. +5% ad Line 1.5% Output Voltage 5% 10% 50% 100% Output Load Current (%) www.recom-power.com REV: 1/2015 E-101 RxxP2xxS_D /Rx Series ECONOLINE DC/DC-Converter Typical Characteristics RxxP205S/R6.4 RxxP205S/R8 Deviation / Load Efficiency / Load 25.000 100 R05P205S/R6.4 20.000 Deviation from Nominal (%) R12P205S/R6.4 80 60 R24P205S/R6.4 Efficiency % 40 20 0 0% 20% 40% 80% 60% 100% 10.000 5.000 0.000 -5.000 -10.000 Total Output current (%) RxxP2xx/R R12P205S/R6.4 R24P205S/R6.4 15.000 R05P205S/R6.4 0% 20% 40% 60% Total Output current (%) 80% 100% RxxP205D/R6.4 RxxP205D/R8 Efficiency / Load Deviation / Load 100 80 25.000 R05P205D/R6.4 20.000 Deviation from Nominal (%) R12P205D/R6.4 60 Efficiency % 40 R24P205D/R6.4 20 0 0% 20% 40% 60% 80% 100% 15.000 10.000 R24P205D/R6.4 5.000 0.000 -5.000 -10.000 Total Output current (%) E-102 R12P205D/R6.4 REV: 1/2015 R05P205D/R6.4 0% 20% 40% 60% Total Output current (%) 80% 100% www.recom-power.com RxxP2xxS_D /Rx Series ECONOLINE DC/DC-Converter Package Style and Pinning (mm) 7 PIN SIP Package 9.8 12.5 4.1 RECOM R05P205D/R6.4 or R05P205D/R8 **** 7.62 clearance 0.5 Bottom View Single Output RECOM RxxP2xxD/R6.4 or RxxP2xxD/R8 **** RECOM RxxP2xxS/R6.4 or RxxP2xxS/R8 **** 1 2 0.5 1 2 5 6 7 Recommended Footprint Details RECOM RxxP2xxS/X2/R6.4 or RxxP2xxS/X2/R8 **** 0.25 1 2 2.4 1.9 15.24 2.54 Pin # 1 2 5 6 7 0.25 2.4 1.9 10.16 clearance Pin Connections 2.54 /X2 Top View Single +Vin -Vin –Vout No Pin +Vout Dual +Vin -Vin –Vout Com +Vout /X2 +Vin -Vin No Pin -Vout +Vout XX.X ± 0.5 mm XX.XX ± 0.25 mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 1/2015 E-103 RxxP2xx/R /X2 Bottom View 6 7 Top View 1.00ø+0.15/0 2.54 19.5 7 5 /X2 Single Output 1.00ø+0.15/0 2.54 19.5 Dual Output