PRODUCT DATASHEET RM-16DI2 REMOTETRAKTM Select the RM-16DI2 when you need the lowest cost per channel discrete inputs and channel-tochannel isolation is not required PRODUCT HIGHLIGHTS n High density inputs save space and reduce cost n Module runs on existing I/O power supply (a special power source is not required) All inputs return to a common ground n PERFORMANCE SPECIFICATIONS n 16 channels n Nominal input voltage 12/24 VDC/VAC n Guaranteed ON voltage (note 1) 9 VDC n Maximum input voltage 30 VDC n Guaranteed OFF current (note 2) 1.5 mA DC n Guaranteed OFF voltage (note 2) 5.0 VDC n Input resistance 3.7K Ohms n Nominal input current @ 24VDC 10 mA n Filtered mode ON/OFF delay (note 3) 25 mS (10 Hz counting) n Serial communication information See page 19 n RS485 isolation 1200 Volts RMS 1 minute n Required supply voltage 10-30 VDC (0.5 watt typical) n Operating temperature range -30 to 70° C n Storage temperature range -40 to 85° C n Humidity (non-condensing) 5 to 95% Notes: 1. Minimum voltage guaranteed to turn the module ON. 2. The maximum input current/voltage that will not switch the input from OFF to ON. 3. Smart logic ignores transients, power line dropouts and switch contact bounce. ORDERING INFORMATION RM-16DI2-H - Module with field wiring base RM-16DI2-M - Module with universal wiriing base All specifications are subject to change. Consult factory for latest info. SIXNET Technology Park • 331 Ushers Road • Ballston Lake, NY 12019 USA +1 518.877.5173 • Fax +1 518.877.8346 • [email protected] solutions for today’s industrial networking challenges 2002 Datasheet rm-16di2 28-Feb-09 www.sixnet.com