PRODUCT DATASHEET RM-8DO2 REMOTETRAKTM Select RM-8DO2 when you need 8 discrete outputs that can drive up to 3 Amp loads with the benefits of short circuit protection PRODUCT HIGHLIGHTS Amp high-current outputs drive inductive loads Short circuit protection at full rated load Thermal overload protection and shutdown Time Proportioned Outputs for low cost control Direct field wiring with two terminals per output PERFORMANCE SPECIFICATIONS 8 channels Output range 10-30 VDC Max. output current per channel 3 Amps (derate linearly to 2A from 50 to 70°C) Max. output current (entire module) 10 Amps Max. OFF state leakage current 0.05 mA Min. load current per channel 0.1 mA Inrush current (100 mS surge) 10 Amps Max. inductive load 0.2 H (3 Amp load at 24 VDC) Typical ON resistance 0.1 Ohms Typical ON voltage drop (@ 1 Amp) 0.1 VDC Short circuit protection At full rated load Thermal shutdown protection 150° C Serial communication information RS485 isolation 1200 Volts RMS 1 minute Required supply voltage 10-30 VDC (0.5 watt typical) Operating temperature range -30 to 70°C Storage temperature range -40 to 85°C Humidity (non-condensing) 5 to 95% Note: Time Proportioned Outputs control the duty cycle of the output in proportion to an analog output register value. The cycle time and minimum pulse width are configurable. ORDERING INFORMATION RM-8DO2-F - Module with field wiring base RM-8DO2-M - Replacement module only All specifications are subject to change. Consult factory for latest info. SIXNET Technology Park • 331 Ushers Road • Ballston Lake, NY 12019 USA +1 518.877.5173 • Fax +1 518.877.8346 • [email protected] SOLUTIONS FOR TODAY’S INDUSTRIAL NETWORKING CHALLENGES RM-8DO2 DATASHEET 28-FEB-09 WWW.SIXNET.COM