Product Data Sheet Industrial Automation SixTRAK® IPm Open Controller The SixTRAK IPm™ is the ultimate process controller with the power of open LINUX software. Its powerful communications and advanced programming capabilities make it the perfect solution for process control, SCADA or SCS applications. Product Highlights Overview Though it is built on the open LINUX operating system, no knowledge of LINUX is required in most applications. Get all the benefits of open LINUX without any extra effort. The SixTRAK IPm is 100% compatible with Sixnet's legacy SixTRAK Gateways. All existing ISaGRAF user programs will load and run in an IPm without any changes. Industrial RTU Product Highlights Process Control, SCADA and DCS A modular and scalable industrial automation solution Your choice of open programming IEC 61131 open and high-level C++ programming Limitless multi-user connectivity Telephone, internet, and wireless telemetry Dual Ethernet networks Two unique IP addresses for redundant networking Advanced industrial capabilities Redundancy, datalogging, peer-to-peer links True open system design Ethernet TCP, Modbus, LINUX, OPC and more Small to large applications Scalable from 1 to 1,000+ stations Unlimited I/O module expansion Grow from a few points to more than 50,000 Embedded LINUX open-source software Web servers, custom com drivers and much more An OEM’s dream platform Add your own LINUX applications To learn more about our SixTRAK IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173. Features Main Features Flexible open-source LINUX software Redundant networks (5 Ethernet ports) Internet-enabled - both client and server 32-bit PowerPC with power to grow Advanced security capabilities Support for 50,000+ distributed I/O ISaGRAF IEC 61131-3 programming Datalogging and I/O transfers Redundant Datalogging and Datalog Server Modbus/TCP, ASCII and RTU IPm add-on applications DNP3, SNMP, PPP and more True open system design UL, CSA, CE, DNV and Zone 2 rated To learn more about our SixTRAK IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173. Specs Performance Specifications Industrial PowerPC (32 bit data bus) Operating system: embedded LINUX Dynamic memory (RAM): 16+ Megabytes - 32bit; 0 wait states Program memory (Flash): 16+ Megabytes Datalogging memory (RAM): 512K or 2 MB (battery-backed) Maximum local I/O: 640 Maximum distributed I/O: 50,000+ (application dependent) Datalogging support: Sixnet Sixlog IEC 61131 programming: Sixnet ISaGRAF High Level C programming: LINUX open software Ethernet Ports (All) 10/100BaseTx (auto-detecting) Connection: RJ45 (auto-crossover) Protocols: TCP/IP, ARP, UDP, ICNP, DHCP, Modbus/TCP, Sixnet and more Independent networks: 2 w/ unique MAC and IP addresses Network port 1: (1) shielded RJ45 connector Network port 2: (4) shielded RJ45 connectors (linked via integrated industrial Ethernet switch) Serial Port Up to 115,200 baud RS232 Port A RJ45 (TD, RD, CTS, RTS, CD,TR, DSR, GND) RS232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND) RS485 Port C Screws (485+, 485-, GND) (2-wire half-duplex) Protocols (master or slave): Sixnet and Modbus RTU/ASCII; many others available in LINUX Flow control - hardware, software, half/full-duplex modem Environmental Environmental DIN-rail or flat-panel mount Input power: 10-30 VDC Input current: 150 mA @ 24 VDC (typical) Temperature: -40 to 70°C (-40 to 85°C storage) Humidity: 5% to 95% RH (non-condensing) Flammability: UL 94V-0 materials Electrical Safety: UL 508, CSA C22.2/14; EN61010-1 (IEC1010); CE EMI emissions: FCC part 15, ICES-003, Class A; EN55022; EN61326-1; CE EMC immunity: EN61326-1 (EN61000-4-2,3,4,6); CE Vibration: IEC68-2-6 Hazardous locations: UL 1604, CSA C22.2/213, (Class 1, Div 2, Groups A,B,C,D) Cenelec EN50021 Zone 2 MTBF ST-IPm-6350: 2,003,287 Hours GB @ 40°C per MIL-HNDBK-217F2 Marine/offshore tested and/or verified to meet various marine and maritime standards All specifications are subject to change. Contact Sixnet to learn more. To learn more about our SixTRAK IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173. Add I/O Part Number (Module with wiring base) DI DO AI AO Description E2 or EB-MIX24880-D 24 8 8 0 Combination I/O with 1 isolated input counter * E2 or EB-MIX24882-D 24 8 8 2 Combination I/O with 2 analog outputs ** E2 or EB-32DI24-D 32 - - - 32 inputs (10-30 VDC) E2 or EB-16DI24-D 16 - - - 16 individually isolated channels, 10-30 VDC/VAC with counters E2-16DIAC-D 16 - - - 16 individually isolated inputs,120 VAC nominal E2 or EB-32DO24-D - 32 - - High density discrete outputs E2 or EB-16DO24-D - 16 - - Individually isolated 1 Amp outputs with self-resetting fuses E2 or EB-32AI20M-D - - 32 - High density 16 bit 4-20mA inputs with self-resetting fuses E2 or EB-32AI10V-D - - 32 - Voltage inputs E2 or EB-16AI20M-D - - 16 - 16 channels 4-20mA inputs with self-resetting fuses E2 or EB-8AO20M-D - - - 8 4-20mA analog outputs E2 or EB-16AI-8AO-D - - 16 8 16 4-20mA inputs plus 8 4-20mA outputs E2 or EB-16ISOTC-D*** - - 16TC - Instrumentation thermocouples E2 or EB-8ISOTC-D*** - - 8TC - Instrumentation thermocouples E2 or EB-16ISO20M-D*** - - 16 - Isolated 4-20mA inputs E2 or EB-10RTD-D - - 10 RTD - RTD (100 Ohm platinum), -200 to 850°C. To learn more about our SixTRAK IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173. Usage Tips How Much Datalogged Information Can be Stored? Each Sixlog file is allocated a fixed amount of memory. Each record typically contains a time stamp (4 bytes), analog values (2 bytes each), and Each Sixlog file is allocated a fixed amount of memory. Each record typically contains a time stamp (4 bytes), analog values (2 bytes each), and discrete values (8 per byte). The size of the record is automatically computed and displayed for you by the Sixlog software. The overall storage time (until the oldest data in a full file is overwritten by new data) is computed as: Longest storage = (file size) x (capture interval) / (bytes per record) Example: 16 analog values plus a time stamp ( 32 + 4 = 36 bytes) are logged every 5 minutes into a 400K file. Oldest data = 400,000 (approx) x 5 minutes / 36 bytes/record = 55,555 Minutes (38 days) * SixTRAK IPms come with 512KB and 2MB datalogging options Why SixTRAK IPm Instead of other Sixnet Controllers? SixTRAK IPm offers more communication ports (RS232 and Ethernet) than are available on other Sixnet gateways and industrial RTUs. The embedded LINUX operating system in the SixTRAK IPm offers greater programming flexibility and performance than the legacy VersaTRAK / Mini-VersaTRAK industrial RTUs. To learn more about our SixTRAK IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173. Order Guide Recommended RTUs Part Number RS232 RS485 ST-IPM-6350* 2 1 VT-IPM-1410 3 Eth Static RAM Dyn RAM Flash 5 2 MB 64MB 128MB 1 1 512K 16MB 16MB *Best Value Legacy RTUs Part Number RS232 RS485 Eth Static RAM Dyn RAM Flash ST-IPM-1350 2 1 5 512K 16MB 16MB ST-IPM-2350 2 1 5 2 MB 16MB 16MB VT-IPM-2410 3 1 1 2 MB 16MB 16MB Part Number RS232 RS485 Eth Static RAM Dyn RAM Flash ST-GT-1210 1 1 1 512K 16MB 16MB ET-GT-ST-3 1 0 2 - - -* Legacy Controllers *Memory is not applicable because unit is not programmable. Replacement Guide: Legacy Replacement ST-IPm-1350 ST-IPm-635 ST-IPm-2350 ST-IPm-635 VT-IPm-2410 ST-IPm-6350 or VT-IPm-1410 VT-MIPm-131-D VT-MIPm-135-D VT-MIPm-241-D VT-MIPm-245D ST-GT-1210 ST-IPm-6350 or VT-IPm2m-113 ET-GT-ST-3 ST-IPm-6350 or VT-IPm2m-113 To learn more about our SixTRAK IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173.