PRODUCT DATASHEET SLX-8MS-8/9 FOUR FIBER INDUSTRIAL ETHERNET MANAGED SWITCH The SLX-8MS-8/9 is an 8 port industrial Ethernet managed switch featuring 4 noise-immune fiber optic ports. It is designed to be rugged, reliable, real-time and secure to keep your system going even in the toughest conditions. PRODUCT HIGHLIGHTS Four 100 Mbps fiber optic ports for noise immune links up to 120 km Slim packaging fits on your din rail High performance and value Truly industrial hardened design Advanced features and security REAL-TIME SECURE PERFORMANCE Rapid Spanning Tree (RSTP) for fast redundant rings SNMPv1 and v2 network management SNMPv3 authentication & encryption for security SNMP notifications (traps) for report on event Priority Queuing (QoS/CoS) for real-time operation IGMP for Multicast filtering (snooping & querying) VLAN for convenient traffic segregation Broadcast & multicast storm protection RMON & port mirroring for advanced diagnostics Security with HTTPS, SSL, SSH, SNMPv3 & more Easy configuration via Web, Telnet or CLI Free field-installable firmware upgrades forever TROUBLE FREE PERFORMANCE UL/CSA (CUL), CE, Hazardous Locations (Zone 2) and Maritime rated -40 to 75°C operating temperature Dual (redundant) power inputs with spike protection Self-test and alarm output contact Rugged corrosion-resistant aluminum packaging DIN rail or direct panel mounting in multiple positions SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM FOUR FIBER INDUSTRIAL ETHERNET MANAGED SWITCH SPECIFICATIONS ETHERNET PERFORMANCE 8 Ethernet ports including 4 fiber Ethernet switch type managed Store and forward wire speed switching Ethernet protocols supported by all IEEE 802.3 RJ45 ports (shielded) 10/100BaseTX RJ45 speed (10 or 100 Mbps) Auto-negotiation RJ45 MDI/MDIX Auto-crossover RJ45 TD and RD polarity Auto-polarity Fiber optic port speed 100BaseFX (100 Mbps) Fiber optic port wavelength 1300 nm center Fiber multimode (mm) typical 50 or 62.5/125 um (SC or ST) Fiber singlemode (sm) typical 9 or 10 /125 um (SC or ST) Fiber max. distance (full duplex) up to 120km See separate datasheet for fiber transceiver details. Typical latency (varies on load & settings): 10M ports 16 us + frame time 100M ports 5 us + frame time Full or half duplex operation Configurable MAC addresses supported 2048 Memory bandwidth 3.2 Gbps Ethernet isolation 1500 VRMS 1 minute ETHERNET COMPLIANCE IEEE 802.3 (10Mbps Ethernet supports legacy devices) IEEE 802.3u (Fast Ethernet 100Mbps for newer devices) IEEE 802.3x (Full-Duplex with Flow Control) IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and Spanning Tree for interoperability) IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS) IEEE 802.1Q (VLAN for traffic segregation) ”OK” OUTPUT Indicates power and operational status Voltage same as switch input voltage Maximum current output 0.5 Amp MECHANICAL DRAWING SC Fiber or ST Fiber 5.20" [13.21 cm] 4.70" [11.94 cm] Redundant input terminals Input power (with all ports active) 9.0 W typical Input voltage (all models) 10-30 VDC (continuous) Transient protection 15,000 watts peak Spike protection 5,000 watts (10 times for 10 uS) ENVIRONMENTAL Operating temperature range SLX models: -40 to +75°C (cold startup @ -40°C) Storage temperature range -40 to +85 °C Humidity (non-condensing) 5 to 95% RH (conformal coating is available) Vibration IEC60068-2 STANDARDS COMPLIANCE Electrical safety UL508/CSA C22.2/14; EN61010-1, CE EMI emissions FCC part 15, ICES-003; EN61000-6-4, CE EMC immunity IEC61000-6-2, CE locations UL1604, CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2; Category 3), CE (ATEX) Hazardous Marine and offshore rated per ABS Eye safety (fiber models) IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11 PHYSICAL DIN rail or direct panel mounting Packaging - aluminum with IP30 protection Weight 11 oz. (0.31kg) Dimensions - see mechanical drawing All specifications are subject to change. Consult factory for latest info. ORDERING GUIDE Snaps to standard DIN Rail EN50022 (35 mm) Removable DIN clip for direct panel mounting Panel mounting ears accept up to a #12 screw on nwer models Console Port(s) 1.60" [4.07 cm] POWER INPUT SLX-8MS-### See separate datasheets for managed models with only 2 fiber optic ports SLX-8MS-8SC SLX-8MS-8ST Managed with 4 RJ45 ports and 4 multimode fiber optic ports with SC or ST style connector, 4Km SLX-8MS-9SC SLX-8MS-9ST Managed with 4 RJ45 ports and 4 singlemode fiber optic ports with SC or ST style connector, 20Km 3.82" [9.70 cm] Removable Screw Block SLX-8MS-8/9 4.21" [10.70 cm] See the User Manual for a More Detailed Diagram ACCESSORIES ET-PS-024-02 SP-ETH-2 AC to 24VDC, 2A, for din rail mounting Dual port surge & lightning protector Special, mixed or long haul (up to 120km) fiber transceivers are available for special order. Sixnet Technology Park 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES Datasheet SLX-8MS-8/9 Rev: 27 Aug, 2009 WWW.SIXNET.COM