Product Data Sheet Industrial Automation VersaTRAK® IPm® RTU The VersaTRAK IPm™ is the ultimate, open industrial RTU. This versatile RTU is loaded with powerful communications and advanced programming capabilities. Product Highlights Overview The Ultimate RTU with the Power of Completely Open LINUX Software Though it is built-on the open LINUX operating system, no knowledge of LINUX is required in most applications. Get all the benefits of open LINUX with no extra effort. The VersaTRAK IPm is 100% compatible with Sixnet's legacy VersaTRAK RTU. All existing ISaGRAF user programs will load and run in an IPm without any changes. To learn more about our VT-IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173. Features Industrial RTU Product Highlights Stand-alone control of remote sites Flexible open-source LINUX software IPm add-on software Embedded LINUX firmware Datalogging and time-stamping Datalog server Redundant logging Never lose data again ISaGRAF IEC 61131 programming Limitless multi-user connectivity Advanced communications DNP3, SNMP, PPP and more Modbus/TCP, ASCII and RTU Advanced security capabilities True open system design Unlimited I/O expansion Peer to peer I/O transfer capability Master terminal unit / concentrator UL, CSA, CE, DNV and Zone 2 rated To learn more about our VT-IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173. Specs Performance Specifications Industrial PowerPC: (32 bit data bus) Operating system: Embedded LINUX Dynamic memory (RAM): 16 Megabytes – 32bit, 0 wait states Program memory (Flash): 16 Megabytes Datalogging memory (RAM): 512K or 2 MB (battery-backed) Maximum local I/O: 640 Maximum distributed I/O: 50,000+ (application dependent) Datalogging support: Sixnet Sixlog IEC 61131 programming: Sixnet ISaGRAF High Level C programming: LINUX open software Ethernet Port 10/100BaseTx (auto-detecting) Connection RJ45 (auto-crossover) Protocols: TCP/IP, ARP, UDP, ICNP, DHCP, Modbus/TCP, Sixnet and more Serial Port Up to 115,200 baud RS232 Port A RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND) RS232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND) RS485 Port C Screws (485+, 485-, GND) (2-wire half-duplex) RS232 Port D Screws (TD, RD, CTS, RTS, GND) Protocols (master and slave): Sixnet and Modbus RTU/ASCII; many others available in LINUX Flow Control Hardware, software, RTS-party (for radios and RS485) Environmental DIN-rail or flat panel mount Input power 10-30 VDC Input current 100 mA @ 24 VDC (typical) Temperature -40 to 70°C (-40 to 85°C storage) Humidity 5% to 95% RH (non-condensing) Flammability UL 94V-0 materials Electrical Safety UL 508, CSA C22.2/14; EN61010-1 (IEC1010); EMI emissions FCC part 15, ICES-003, Class A; EN55022; EN61326-1; EMC immunity EN61326-1 (EN61000-4-2,3,4,6); Surge withstand IEEE-472 (ANSI C37.90) Vibration IEC68-2-6 Hazardous locations UL 1604, CSA C22.2/213, (Class 1, Div 2, Groups A,B,C,D) Cenelec EN50021 Zone 2 Specifications are subject to change. Contact Sixnet to learn more. To learn more about our VT-IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173. Add I/O Part Number (Module with wiring base) DI DO AI AO Description E2 or EB-MIX24880-D 24 8 8 0 Combination I/O with 1 isolated input counter * E2 or EB-MIX24882-D 24 8 8 2 Combination I/O with 2 analog outputs ** E2 or EB-32DI24-D 32 - - - 32 inputs (10-30 VDC) E2 or EB-16DI24-D 16 - - - 16 individually isolated channels, 10-30 VDC/VAC with counters E2-16DIAC-D 16 - - - 16 individually isolated inputs,120 VAC nominal E2 or EB-32DO24-D - 32 - - High density discrete outputs E2 or EB-16DO24-D - 16 - - Individually isolated 1 Amp outputs with self-resetting fuses E2 or EB-32AI20M-D - - 32 - High density 16 bit 4-20mA inputs with self-resetting fuses E2 or EB-32AI10V-D - - 32 - Voltage inputs E2 or EB-16AI20M-D - - 16 - 16 channels 4-20mA inputs with self-resetting fuses E2 or EB-8AO20M-D - - - 8 4-20mA analog outputs E2 or EB-16AI-8AO-D - - 16 8 16 4-20mA inputs plus 8 4-20mA outputs E2 or EB-16ISOTC-D*** - - 16TC - Instrumentation thermocouples E2 or EB-8ISOTC-D*** - - 8TC - Instrumentation thermocouples E2 or EB-16ISO20M-D*** - - 16 - Isolated 4-20mA inputs E2 or EB-10RTD-D - - 10 RTD - RTD (100 Ohm platinum), -200 to 850°C. To learn more about our VT-IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173. Usage Tips Selecting the 512K or 2 Megabyte Memory Option 512K of datalogging memory can store up to 250,000 analog values 2 Megabytes of datalogging memory can store up to 1,000,000 analog values How Much Datalogged Information Can be Stored? Each Sixlog file is allocated a fixed amount of memory. Each record typically contains a time stamp (4 bytes), analog values (2 bytes each), and discrete values (8 per byte). The size of the record is automatically computed and displayed for you by the Sixlog software. The overall storage time (until the oldest data in a full file is overwritten by new data) is computed as: Longest storage = (file size) x (capture interval) / (bytes per record) Example: 16 analog values plus a time stamp are logged every 5 minutes into a 512K file. Oldest data = 512,000 (approx) x 5 minutes / 36 bytes /record = 71,111 Minutes (49 days) By default, the VT-IPM-1410 has more than 400K for datalogging and the VT-IPM-2410 has more than 1.9 Megabytes. Adding I/O modules to a VersaTRAK IPm Any combination of SixTRAK, EtherTRAK and RemoteTRAK I/O modules can be connected to a VersaTRAK IPm. A single VersaTRAK IPm supports up to 1,024 SixTRAK I/O and will interface with up to approximately 50,000 EtherTRAK and/or RemoteTRAK I/O. Why VersaTRAK IPm Instead of other Sixnet Controllers? VersaTRAK IPm offers more communication ports (RS232 and Ethernet) than are available on other Sixnet gateways and RTUs. The embedded LINUX operating system in the VersaTRAK IPm offers greater programming flexibility and performance. To learn more about our VT-IPm Industrial RTU, simply contact [email protected] or call +1 (518) 877-5173. Order Guide Recommended RTUs Part Number RS232 RS485 Eth Static RAM Dyn RAM Flash VT-IPM-1410 3 1 1 512K 16MB 16MB ST-IPM-6350* 2 1 5 2 MB 64MB 128MB * Best Value Legacy RTUs Part Number RS232 RS485 Eth Static RAM Dyn RAM Flash VT-IPM-2410 3 1 1 2MB 16MB 16MB ST-IPM-1350 2 1 5 512K 16MB 16MB ST-IPM-2350 2 1 5 2 MB 16MB 16MB Legacy Controller's Part Number RS232 RS485 Eth Static RAM Dyn RAM Flash ST-GT-1210 1 1 1 512K 16MB 16MB ET-GT-ST-3 1 0 2 - - -* *Memory is not applicable because unit is not programmable. Replacement Guide Legacy Product Replacement RTUs ST-IPm-1350 ST-IPm-635 ST-IPm-2350 ST-IPm-635 VT-IPm-2410 ST-IPm-6350 or VT-IPm-1410 VT-MIPm-131-D VT-MIPm-135-D VT-MIPm-241-D VT-MIPm-245D ST-GT-1210 Any IPm ET-GT-ST-3 ST-IPm-6350 or VT-IPm2m-113