FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Features -40dB Off Isolation at 250MHz -40dB Non-adjacent Channel Crosstalk at 250MHz On Resistance: 4.5Ω Typical (RON) -3dB Bandwidth: 750MHz Low-Power Consumption: 1µA Maximum Control Input: TTL Compatible Bi-directional Operation USB High-Speed and Full-Speed Signaling Description FSUSB22 is a low-power, high-bandwidth switch specially designed for applications switching high-speed USB 2.0 signals in handset and consumer applications; such as cell phone, digital camera, and notebook with hubs or controllers of limited USB I/O. The wide bandwidth (750MHz) allows signals to pass with minimum edge and phase distortion. Superior channelto-channel crosstalk results in minimal interference. It is compatible with the USB2.0 Hi-Speed standard. . Capability Applications Cell Phones, PDAs, Digital Cameras, Notebook Computers Ordering Information Part Number Operating Temperature Range FSUSB22BQX -40 to +85°C 16-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.5mm FSUSB22QSC -40 to +85°C 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide Tube FSUSB22QSCX -40 to +85°C 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide Tape and Reel FSUSB22MTC -40 to +85°C 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide FSUSB22MTCX -40 to +85°C Package 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Packing Method Tape and Reel Tube Tape and Reel All packages are lead free per JEDEC: J-STD-020B standard. ©2005Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 www.fairchildsemi.com FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch March 2008 Analog Symbol D- USB Port D+ Docking Station D+ USB Port D- S VCC 1 16 1B1 2 15 /OE 1B2 3 14 4B1 1A 4 13 4B2 2B1 5 12 4A 2B2 6 11 3B1 2A 10 3B2 Docking Connector USB 2.0 Host Controller D+ D+ D- D- D+ FSUSB22 USB Port D+ D- D- USB Port 7 Notebook Computer Figure 1. Logic Diagram 1 S 1B1 2 1B2 16 8 9 GND 3A Figure 2. VCC Analog Symbol S VCC 1 16 15 /OE 1B1 2 15 /OE 3 14 4B1 1B2 3 14 4B1 1A 4 13 4B2 1A 13 4B2 2B1 5 12 4A 2B1 5 12 2B2 6 11 3B1 2B2 6 11 3B1 2A 7 10 3B2 9 3A 8 GND FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Logic Diagram 2A Figure 3. QSOP and TSSOP Pin Configuration 4 4A 10 3B2 7 8 9 GND 3A Figure 4. Pad Assignment for DQFN Pin Descriptions Pin # Pin Names Description 1 S Select Input 2,3,5,6,10,11,13,14 1B1,1B2, 2B1,2B2,3B2,3B1,4B2,4B1 Bus B 8 GND Ground 4,7,9,12 1A,2A,3A,4A Bus A 15 /OE Bus Switch Enable 16 VCC Supply Voltage S OE Function Don’t Care HIGH Disconnect LOW LOW A=B1 HIGH LOW A=B2 Truth Table © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit -0.5 4.6 V VCC + 0.05 V VCC Supply Voltage VS DC Switch Voltage -0.5 VIN DC Input Voltage (1) -0.5 4.6 V IIK DC Input Diode Current, VIN<0V -50 mA DC Output Sink Current 128 mA IOUT ICC / IGND DC VCC / GND Current TSTG Storage Temperature Range ESD Human Body Model, JESD22-A114 -65 ±100 mA +150 °C 4 kV Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter VCC Power Supply Operating VIN Input Voltage VOUT Min. Output Voltage Switch Control Input tr , tf Input Rise and Fall Time TA Operating Temperature, Free Air (2) Switch I/O Max. Unit 3.0 3.6 V 0 VCC V 0 VCC V 0 5 0 DC -40 +85 ns/V FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Absolute Maximum Ratings °C Note: 2. Unused control inputs must be held HIGH or LOW. They may not float. © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 www.fairchildsemi.com 3 Typical values are at VCC = 3.0V and TA = 25°C. Symbol VIK Parameter Conditions Clamp Diode Voltage IIN = -18mA VCC (V) TA=-40 to +85°C Min. Typ. 3.0 Units Max. -1.2 V VIH High-Level Input Voltage 3.0 to 3.6 VIL Low-Level Input Voltage 3.0 to 3.6 0.8 V IIN Input Leakage Current 0 ≤ VIN ≤ 3.6V 3.6 ±1.0 µA IOFF Off-state Leakage Current 0 ≤ A, B ≤ VCC 3.6 ±1.0 µA RON Switch On Resistance VIN = 0.8V, ION = 8mA 3.0 5 7 VIN = 3.0V, ION = 8mA 3.0 4.5 6.5 VIN = 0.8V, VIN = 0V - 1.5, ION = 8mA 3.0 0.3 Ω IOUT = 8mA 3.0 1 Ω VIN = VCC or GND, IOUT = 0 3.6 ΔRON RFLAT(ON) ICC (3) Delta RON On Resistance Flatness (4) Quiescent Supply Current 2.0 V 1 µA Notes: 3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the A or B pins. 4. Flatness is defines as the difference between the maximum and the minimum value on resistance over the specified range of conditions. © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 Ω FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch DC Electrical Characteristics www.fairchildsemi.com 4 Typical values are at VCC = 3.0V and TA = 25°C. Symbol Parameter Conditions VCC(V) Min. Typ. Max. Units Figure tON Turn-on Time S-to-Bus B 3.0 to 3.6 4.5 6.0 ns Figure 9 Figure 10 tOFF Turn-off Time S-to-Bus B 3.0 to 3.6 2.5 4.0 ns Figure 9 Figure 10 tPD Propagation Delay CL = 10pF 3.0 to 3.6 0.25 ns Figure 14 OIRR Non-Adjacent Off Isolation f = 250MHz, RL = 50Ω 3.0 to 3.6 -30 dB Figure 11 XTALK Non-Adjacent Channel Crosstalk f = 250MHz, RL = 50Ω 3.0 to 3.6 -38 dB Figure 12 -3dB Bandwidth RL = 50Ω 3.0 to 3.6 750 MHz Figure 13 Units Figure BW USB Related AC Electrical Characteristics Typical values are at VCC = 3.0V and TA = 25°C. Symbol Parameter tSK(O) Channel-to Channels Skew CL = 10pF 3.0 to 3.6 0.051 pF Figure 14 Figure 16 tSK(P) Skew of Opposite Transition of the Same Output CL = 10pF 3.0 to 3.6 0.020 pF Figure 14 Figure 16 Total Jitter RL = 50Ω, CL = 10pF tR = tF = 750ps at 480MPs 3.0 to 3.6 0.210 TJ Conditions VCC (V) Min. Typ. Max. FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch AC Electrical Characteristics Capacitance Typical values are at VCC = 3.0V and TA = 25°C. Symbol Parameter Conditions Typ. Unists CIN Control Pin Input Capacitance VCC = 0V 2.5 pF CON A/B On Capacitance VCC = 3.3V, /OE = 0V 12 pF COFF Port B Off Capacitance VCC and /OE = 3.3V 4.5 pF © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 www.fairchildsemi.com 5 Figure 5. Gain vs. Frequency Figure 6. Off Isolation Figure 7. Crosstalk © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Performance Characteristics Figure 8. RON www.fairchildsemi.com 6 FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch AC Loadings and Waveforms A B1 B2 10pF 50Ω Control GND S /OE Notes: Input driven by 50Ω source terminated in 50Ω. CL includes load and stray capacitance. Input PRR-1.0MHz, tW = 500ns. Figure 9. AC Test Circuit tr = 2.5ns 90% SELECT INPUT 90% 1.5V tf = 2.5ns 3.0V 1.5V 10% 10% tON GND t OFF 90% 90% VOH OUTPUT VOL Figure 10. AC Waveforms B1 B1 A A 100Ω 50Ω 100Ω 50Ω B2 50 50Ω S Control S /OE /OE Figure 11. Off Isolation Test © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 Control Figure 12. Crosstalk Test www.fairchildsemi.com 7 A B Monitor 50Ω S Control GND /OE Figure 13. Bandwidth Test 800mV 50% Input 400mV 50% tPLH tPHL VOH 50% Output 50% VOL Figure 14. Propagation Delay 800mV 50% 50% Input 400mV 0 tPHL tPLH VOH 50% 50% FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch AC Loadings and Waveforms Output VOL tSK(P) = | tPHL - tPHL | Figure 15. Pulse Skew tSP(P) 800mV 50% 50% Input 400mV tPHL1 tPLH1 0 50% 50% Output 1 tSK(O) tSK(O) 50% 50% Output 2 tPHL2 tPLH2 tSK(O) = | tPLH1 - tPLH2 | or | tPHL1 - tPHL2 | Figure 16. Output Skew tSK(O) © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 www.fairchildsemi.com 8 FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Physical Dimensions Figure 17. 16-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241,2.5 x 3.5mm Note: click here for tape and reel specifcations, available at: http://www.fairchildsemi.com/products/analog/pdf/MLP16_25x35_TNR.pdf Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 www.fairchildsemi.com 9 LAND PATTERN RECOMMENDATION TOP VIEW END VIEW SIDE VIEW FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Physical Dimensions DETAIL A Figure 18. 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 www.fairchildsemi.com 10 5.00±0.10 4.55 5.90 4.45 7.35 0.65 4.4±0.1 1.45 5.00 0.11 12° FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Physical Dimensions MTC16rev4 Figure 19. 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 www.fairchildsemi.com 11 FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch © 2005 Fairchild Semiconductor Corporation FSUSB22 • Rev. 1.0.3 www.fairchildsemi.com 12