FSAV430 Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch Features Description The FSAV430 is a high performance Quad Single-Pole, Double Throw (SPDT) (2-to-1 multiplexer / demultiplexer) video switch designed specifically for switching high definition YPbPr and computer RGB (up to UXGA) signals. The bandwidth of this device is 1.1GHz (typical) which allows signals to pass with minimal edge and phase distortion. Image integrity is maintained with low crosstalk, high off-isolation and low differential gain and phase. The low on resistance (4.5 typical) minimizes signal insertion loss. Low voltage operation (3V), low power consumption (1µA maximum) and small scale packaging make this device ideal for a broad range of applications. -40dB Off Isolation at 30MHz -60dB Non-Adjacent Channel Crosstalk at 30MHz 3dB Bandwidth: 1.1GHz On Resistance: 4.5 (Typical) Low Power Consumption: 1µA (Maximum) Control Input TTL Compatible Bidirectional Operation Applications RGB Video Switch in LCD, Plasma and Projector Displays DVD-RW Ordering Information Part Number Operating Temperature Range FSAV430MTCX -40 to +85°C 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Tape and Reel FSAV430QSCX -40 to +85°C 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 inch Wide Tape and Reel Package Packing Method Figure 1. Typical Application Diagram © 2004 Fairchild Semiconductor Corporation FSAV430 • Rev. 1.02 www.fairchildsemi.com FSAV430 — Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch January 2011 Figure 2. Analog Symbol Figure 3. QSOP and TSSOP Pin Assignments Pin Descriptions Pin # Name Description 15 /OE 1 S Select Input 4, 7, 9, 12 A Bus A 2, 3, 5, 6, 10, 11,13, 14 B1-B2 Bus B 8 GND Ground 16 VCC Supply Voltage S /OE Function Don’t Care HIGH Disconnected LOW LOW A=B1 HIGH LOW A=B2 Bus Switch Enabled FSAV430 — Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch Pin Configurations Truth Table © 2004 Fairchild Semiconductor Corporation FSAV430 • Rev. 1.0.2 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit -0.5 +4.6 V V VCC Supply Voltage VS DC Switch Voltage -0.5 VCC+0.5 VIN (1) DC Input Voltage -0.5 +4.6 IIK DC Input Diode Current, VIN< 0V -50 IOUT ICC/IGND DC Output Sink Current DC VCC / GND Current TSTG Storage Temperature Range ESD Human Body Model, JESD22-A114 -65 V mA 128 mA ±100 mA +150 °C 4000 V Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Max. Unit VCC Power Supply 3.0 3.6 V VIN Input Voltage 0 VCC V V VOUT Output Voltage 0 VCC Switch Control Input 0 5 Switch I/O 0 DC -40 +85 tr, tf Input Rise and Fall Time TA Operating Temperature, Free Air FSAV430 — Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch Absolute Maximum Ratings ns/V °C Note: 2. Unused control inputs must be held HIGH or LOW; they may not float. © 2004 Fairchild Semiconductor Corporation FSAV430 • Rev. 1.0.2 www.fairchildsemi.com 3 Typical values are at TA= +25°C. Symbol VANALOG VIK VIH VIL II IOFF RON Parameter Conditions TA= -40 to +85°C Min. Typ. Max. Analog Signal Range Clamp Diode Voltage High-Level Input Voltage Low-Level Input Voltage Input Leakage Current 0 0 VIN 3.6V 3.0 3.0 to 3.6 3.0 to 3.6 3.6 Off-State Leakage Current 0 A, B VCC 3.6 Switch On Resistance(3) VIN=1.0V, RI=75, ION=13mA 3.0 5.0 7.0 VIN=2.0V, RI=75, ION=26mA IOUT=13mA, VIN=0 to VCC VIN=VCC or GND, IOUT=0 One Input at 3.0V Other Inputs at VCC or GND 3.0 3.0 3.6 4.5 1 6.0 IIN=-18mA RFLAT(ON) On Resistance Flatness(4) ICC Quiescent Supply Current ICC VCC (V) Increase in ICC per Input 2 -1.2 Units 0.8 ±1.0 V V V V µA ±1.0 µA 2.0 3.6 1 µA 30 mA Notes: 3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the A or B pins. 4. Flatness is defined as the difference between the maximum and minimum value on resistance over the specified range of conditions. AC Electrical Characteristics Typical values are at VCC=3.3V and TA= +25°C. Symbol tON tOFF Parameter Turn On Time S to Bus A Output Enable Time OE to A Turn Off Time S to Bus A Conditions TA=-40 to+85°C Min. Typ. Max. VCC Bn=2V 4.8 Units Figure ns Figure 11, Figure 12 ns Figure 11, Figure 12 7.0 3.0 to 3.6 Bn=2V 4.5 6.8 2.2 4.0 3.0 to 3.6 Output Disable Time OE to A 2.2 3.5 DG Differential Gain RL=75, f=3.58MHz 3.0 to 3.6 0.2 % DP Differential Phase RL=75, f=3.58MHz 3.0 to 3.6 0.1 ° 3.0 to 3.6 -40 dB 3.0 to 3.6 -60 dB OIRR XTALK BW Non-Adjacent RL=75, f=30MHz Off Isolation Non-Adjacent RL=75, f=30MHz Channel Crosstalk -3dB Bandwidth RL=50 3.0 to 3.6 800 Figure 5, Figure 6 Figure 5, Figure 6 Figure 7, Figure 13 Figure 8, Figure 14 Figure 4, Figure 15 600 RL=75 FSAV430 — Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch DC Electrical Characteristics Capacitance Typical values are at VCC= 3.3V and TA=+25°C. Symbol CIN CON COFF Parameter Control Pin Input Capacitance A/B On Capacitance Port B Off Capacitance © 2004 Fairchild Semiconductor Corporation FSAV430 • Rev. 1.0.2 Conditions VCC=0V VCC=3.3V, /OE=0V VCC=/OE=3.3V Typ. Units 2.5 12.0 4.0 pF pF pF www.fairchildsemi.com 4 Figure 4. Gain vs. Frequency Figure 5. Differential Gain vs. DC Bias Figure 6. Differential Phase vs. DC Bias Figure 7. Off Isolation © 2004 Fairchild Semiconductor Corporation FSAV430 • Rev. 1.0.2 FSAV430 — Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch AC Characteristics www.fairchildsemi.com 5 Figure 8. Off Crosstalk vs. Frequency RON Switch Characteristics Figure 9. RON Switch On Resistance, ION=13mA, VCC=3.0V Figure 10. RON Switch On Resistance, ION=26mA, VCC=3.0V © 2004 Fairchild Semiconductor Corporation FSAV430 • Rev. 1.0.2 FSAV430 — Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch AC Characteristics www.fairchildsemi.com 6 FSAV430 — Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch AC Loadings and Waveforms Notes: 5. Input drive by 50 source terminated in 50. 6. CL includes load and stray capacitance. 7. Input PRR=1.0MHz, tW =500ns. Figure 11. AC Test Circuit Figure 12. AC Waveforms Figure 13. Off Isolation Test Figure 14. Figure 15. © 2004 Fairchild Semiconductor Corporation FSAV430 • Rev. 1.0.2 Crosstalk Bandwidth www.fairchildsemi.com 7 FSAV430 — Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch Physical Dimensions LAND PATTERN RECOMMENDATION TOP VIEW END VIEW SIDE VIEW DETAIL A Figure 16. 16-Lead, Quarter Size Outline Package (QSOP) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/products/analog/pdf/qsop16_tr.pdf. © 2004 Fairchild Semiconductor Corporation FSAV430 • Rev. 1.0.2 www.fairchildsemi.com 8 5.00±0.10 4.55 5.90 4.45 7.35 0.65 4.4±0.1 1.45 5.00 0.11 12° FSAV430 — Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch Physical Dimensions (Continued) MTC16rev4 Figure 17. 16-Lead, Thin Shrink Small Outline Package (TSSOP) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging. For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/products/analog/pdf/tssop16_tr.pdf. © 2004 Fairchild Semiconductor Corporation FSAV430 • Rev. 1.0.2 www.fairchildsemi.com 9 FSAV430 — Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch © 2004 Fairchild Semiconductor Corporation FSAV430 • Rev. 1.0.2 www.fairchildsemi.com 10