FSAV332 — Quad Video Switch with Individual Enables Features Description The FSAV332 video switch is a quad high-speed video switch. Low on resistance allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Wide Bandwidth: 368MHz -84dB Non-adjacent Channel Crosstalk at 10MHz -49dB Off-Isolation at 10MHz The device is organized as four one-bit switches with separate output enable (/OE) pins. When OE is LOW, the switch is ON and port A is connected to port B. When OE is HIGH, the switch is OPEN and a highimpedance state exists between the two ports. 3Ω Typical On Resistance (RON) Low-Power Consumption: 3µA Maximum Control Input: TTL Compatible Applications Y/C Video or CVBS Video Switch in LCD Plasma, or Projector Displays Ordering Information Part Number Operating Temperature Range Package Packing Method FSAV332MTC -40 to +85°C 14-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Tube FSAV332MTCX -40 to +85°C 14-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Tape and Reel FSAV332QSC -40 to +85°C 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 inch Wide Tube FSAV332QSCX -40 to +85°C 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 inch Wide Tape and Reel All packages are lead free per JEDEC: J-STD-020B standard. /OE1 1B 1A /OE2 2B 2A /OE3 3B 3A /OE4 4B 4A Figure 1. Logic Diagram © 2004 Fairchild Semiconductor Corporation FSAV332 • Rev. 1.0.3 www.fairchildsemi.com FAV332 — Quad Video Switch with Individual Enables March 2008 /OE1 1 14 VCC 1A 2 13 /OE4 1B 3 12 4A /OE2 4 11 4B 2A 5 10 /OE3 2B 6 9 3A GND 7 8 3B Figure 2. TSSOP Pin Assignments NC 1 16 VCC /OE1 2 15 /OE4 1A 3 14 4A 1B 4 13 4B /OE2 5 12 /OE3 2A 6 11 3A 2B 7 10 3B GND 8 9 NC Figure 3. QSOP Pin Assignments FSAV332 — Quad Video Switch with Individual Enables Pin Assignments Pin Descriptions Pin Names Description /OE1, /OE2, /OE3, /OE4 Bus Switch Enables 1A, 2A, 3A, 4A Bus A 1B, 2B, 3B, 4B Bus B NC Not Connected VCC Supply Voltage GND Ground Inputs Inputs/Outputs Truth Table /OE A, B LOW A=B HIGH High Impedance © 2004 Fairchild Semiconductor Corporation FAV332 • Rev. 1.0.3 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter Supply Voltage (1) VS DC Switch Voltage VIN DC Input Voltage IIK DC Input Diode Current (1) IOUT DC Output Current TSTG Storage Temperature Range ESD Human Body Model, JESD22-A114 Min. Max. Unit -0.5 7.0 V -0.5 VCC + 0.5 V -0.5 7.0 V -50 -65 mA 128 mA +150 °C 4000 V Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol VCC Parameter Power Supply (2) VIN Control Input Voltage VS Switch Input Voltage TA Operating Temperature ΘJA Thermal Resistance Min. Max. Unit 4.75 5.25 V 0 VCC V 0 VCC V -40 +85 °C TSSOP +115 QSOP +127 FSAV332 — Quad Video Switch with Individual Enables Absolute Maximum Ratings °C/W Note: 2. Unused control inputs must be held HIGH or LOW; they may not float. © 2004 Fairchild Semiconductor Corporation FAV332 • Rev. 1.0.3 www.fairchildsemi.com 3 All typical values are for VCC=5.0V and 25°C, unless otherwise noted. Symbol Parameter Conditions VANALOG Analog Signal Range VIK Clamp Diode Voltage VIH High-Level Input Voltage VIL Low-Level Input Voltage IIN Input Leakage Current Off-state Leakage Current IOZ RON Switch On Resistance ICC Quiescent Supply Current VCC (V) VIN = 0V to VCC 4.75 to 5.25 4.75 4.75 to 5.25 4.75 to 5.25 5.25 0 ≤ A, B ≤ VCC 5.25 VIN=1V, RL=75Ω, ION=13mA VIN=2V, RL=75Ω, ION=26mA 4.75 4.75 VIN= 0V VCC or IOUT=0 5.25 IIN=-18mA (3) Min. Typ. Max. Units 2 V -1.2 V 0 2.0 V 0.8 V ±1.0 µA ±1.0 µA 7 10 Ω 3 µA 3 7 Note: 3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the A or B pins. AC Electrical Characteristics All typical values are for VCC=5.0V at TA=25°C, unless otherwise noted. Symbol Parameter tON Turn-on Time tOFF Turn-off Time tPLH, tPHL Conditions Min. VIN=7V for tPZL, VIN=Open for tPZH VIN=7V for tPZL, VIN=Open for tPZH (4) Typ. Max. Units Figure 1.0 5.0 ns Figure 4 Figure 5 1.0 5.0 ns 0.1 ns Figure 4 Figure 5 Figure 4 Figure 5 Propagation Delay VIN=Open DG Differential Gain RL=150Ω, f=3.58MHz 0.29 % DP Differential Phase RL=150Ω, f=3.58MHz 0.1 ° OIRR Off Isolation f=10MHz, RL=150Ω -84 dB Figure 6 XTALK Crosstalk RL=150Ω, f=10MHz -54 dB Figure 7 -3dB Bandwidth RL=150Ω 368 MHz Figure 8 BW FSAV332 — Quad Video Switch with Individual Enables DC Electrical Characteristics Note: 4. This parameter is guaranteed by design. Capacitance All typical values are for TA= -40 to +85°C. Symbol Parameter Conditions Typ. Units CIN Control Pin Input Capacitance VCC=5.0V 3.0 pF CON A/B On Capacitance VCC=5.0V, /OE=0V 30.0 pF COFF Port B Off Capacitance VCC and /OE=5.0V 5.0 pF © 2004 Fairchild Semiconductor Corporation FAV332 • Rev. 1.0.3 www.fairchildsemi.com 4 Notes: Input drive by 50Ω source terminated in 50Ω. CL includes load and stray capacitance. Input PRR=1.0MHz, tW =500ns. Figure 4. AC Test Circuit FSAV332 — Quad Video Switch with Individual Enables AC Loadings and Waveforms Figure 5. AC Waveforms © 2004 Fairchild Semiconductor Corporation FSAV332 • Rev. 1.0.3 www.fairchildsemi.com 5 FSAV332 — Quad Video Switch with Individual Enables Test Diagrams A B 50Ω 150Ω /OE VCC Figure 6. Off Isolation A B 100Ω 100Ω 150Ω /OE Figure 7. Crosstalk B A Monitor 150Ω /OE GND Figure 8. Bandwidth © 2004 Fairchild Semiconductor Corporation FSAV332 • Rev. 1.0.3 www.fairchildsemi.com 6 FSAV332 — Quad Video Switch with Individual Enables Physical Dimensions LAND PATTERN RECOMMENDATION TOP VIEW END VIEW SIDE VIEW DETAIL A Figure 9. 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2004 Fairchild Semiconductor Corporation FSAV332 • Rev. 1.0.3 www.fairchildsemi.com 7 FSAV332 — Quad Video Switch with Individual Enables Physical Dimensions 0.65 0.43 TYP 1.65 6.10 0.45 12.00°TOP & BOTTOM R0.09 min A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 1982 E. LANDPATTERN STANDARD: SOP65P640X110-14M F. DRAWING FILE NAME: MTC14REV6 1.00 R0.09min Figure 10. 14-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. © 2004 Fairchild Semiconductor Corporation FSAV332 • Rev. 1.0.3 www.fairchildsemi.com 8 FSAV332 — Quad Video Switch with Individual Enables © 2004 Fairchild Semiconductor Corporation FSAV332 • Rev. 1.0.3 www.fairchildsemi.com 9