June 2009 FDV301N Digital FET , N-Channel General Description Features This N-Channel logic level enhancement mode field effect transistor is produced using Fairchild's proprietary, high cell density, DMOS technology. This very high density process is especially tailored to minimize on-state resistance. This device has been designed especially for low voltage applications as a replacement for digital transistors. Since bias resistors are not required, this one N-channel FET can replace several different digital transistors, with different bias resistor values. 25 V, 0.22 A continuous, 0.5 A Peak. RDS(ON) = 5 Ω @ VGS= 2.7 V RDS(ON) = 4 Ω @ VGS= 4.5 V. Very low level gate drive requirements allowing direct operation in 3V circuits. VGS(th) < 1.06V. Gate-Source Zener for ESD ruggedness. >6kV Human Body Model Replace multiple NPN digital transistors with one DMOS FET. SOT-23 SuperSOTTM-6 SuperSOTTM-8 SO-8 SOIC-16 SOT-223 Mark:301 INVERTER APPLICATION Vcc D D OUT IN G Absolute Maximum Ratings Symbol G S GND S TA = 25oC unless other wise noted Parameter FDV301N Units VDSS, VCC Drain-Source Voltage, Power Supply Voltage 25 V VGSS, VI Gate-Source Voltage, VIN 8 V ID, IO Drain/Output Current 0.22 A - Continuous 0.5 PD Maximum Power Dissipation TJ,TSTG Operating and Storage Temperature Range ESD Electrostatic Discharge Rating MIL-STD-883D Human Body Model (100pf / 1500 Ohm) 0.35 W -55 to 150 °C 6.0 kV 357 °C/W THERMAL CHARACTERISTICS RθJA Thermal Resistance, Junction-to-Ambient ©2009 Fairchild Semiconductor Corporation FDV301N Rev.F1 Inverter Electrical Characteristics (TA = 25°C unless otherwise noted) Symbol Parameter Conditions Max Units IO (off) Zero Input Voltage Output Current VCC = 20 V, VI = 0 V 1 µA VI (off) Input Voltage VCC = 5 V, IO = 10 µA 0.5 V VI (on) RO (on) Min VO = 0.3 V, IO = 0.005 A Output to Ground Resistance Typ 1 VI = 2.7 V, IO = 0.2 A V 4 5 Ω Typ Max Units Electrical Characteristics (TA = 25 OC unless otherwise noted ) Symbol Parameter Conditions Min 25 OFF CHARACTERISTICS BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 µA ∆BVDSS/∆TJ Breakdown Voltage Temp. Coefficient ID = 250 µA, Referenced to 25 o C IDSS Zero Gate Voltage Drain Current VDS = 20 V, VGS = 0 V IGSS Gate - Body Leakage Current VGS = 8 V, VDS= 0 V V TJ = 55°C ON CHARACTERISTICS mV / oC 25 1 µA 10 µA 100 nA (Note) ∆VGS(th)/∆TJ Gate Threshold Voltage Temp. Coefficient ID = 250 µA, Referenced to 25 o C VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA RDS(ON) Static Drain-Source On-Resistance VGS = 2.7 V, ID = 0.2 A mV / oC -2.1 0.70 TJ =125°C VGS = 4.5 V, ID = 0.4 A 0.85 1.06 V 3.8 5 Ω 6.3 9 3.1 4 ID(ON) On-State Drain Current VGS = 2.7 V, VDS = 5 V gFS Forward Transconductance VDS = 5 V, ID= 0.4 A 0.2 0.2 A S VDS = 10 V, VGS = 0 V, f = 1.0 MHz 9.5 pF 6 pF 1.3 pF DYNAMIC CHARACTERISTICS Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance SWITCHING CHARACTERISTICS (Note) tD(on) Turn - On Delay Time tr Turn - On Rise Time tD(off) Turn - Off Delay Time tf Turn - Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge VDD = 6 V, ID = 0.5 A, VGS = 4.5 V, RGEN = 50 Ω VDS = 5 V, ID = 0.2 A, VGS = 4.5 V 3.2 8 ns 6 15 ns 3.5 8 ns 3.5 8 ns 0.49 0.7 nC 0.22 nC 0.07 nC DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS IS Maximum Continuous Drain-Source Diode Forward Current VSD Drain-Source Diode Forward Voltage VGS = 0 V, IS = 0.29 A (Note) 0.8 0.29 A 1.2 V Note: Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0%. FDV301N Rev.F1 Typical Electrical Characteristics 1 .4 0 .5 GS = 4.5V 4 .0 3 .5 3 .0 0 .4 R DS(on ) , NORMALIZED DRAIN-SOURCE ON-RESISTANCE I D , DRAIN-SOURCE CURRENT (A) V 2 .7 2 .5 0 .3 0 .2 2 .0 0 .1 1 .5 VGS = 2 .0V 1 .2 2 .5 2 .7 1 3 .0 3 .5 4 .0 0 .8 4 .5 0 .6 0 0 0 .5 V DS 1 1 .5 2 , DRAIN-SOURCE VOLTAGE (V) 2 .5 0 3 0 .4 0 .5 15 R DS(on) , ON-RESISTANCE (OHM) 1.8 R DS(ON) , NORMALIZED 0 .2 0 .3 I D , DRAIN CURRENT (A) Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. Figure 1. On-Region Characteristics. DRAIN-SOURCE ON-RESISTANCE 0 .1 I D = 0.2A 1.6 VGS = 2.7 V 1.4 1.2 1 0.8 ID = 0.2A 12 25°C 125°C 9 6 3 0 0.6 -50 2 -25 0 25 50 75 100 125 2.5 150 TJ , JUNCTION TEMPERATURE (°C) Figure 3. On-Resistance Variation 0.5 V GS = 0V 0.2 I S, REVERSE DRAIN CURRENT (A) I D , DRAIN CURRENT (A) 125°C 0 .1 5 0 .1 0 .0 5 0 0 .5 1 V GS 1 .5 2 , GATE TO SOURCE VOLTAGE (V) 4 Gate-To-Source Voltage. T = -55°C J 25°C V DS = 5.0V 3.5 Figure 4. On Resistance Variation with with Temperature. 0 .2 3 V GS , GATE TO SOURCE VOLTAGE (V) 2 .5 TJ = 125°C 0.1 25°C 0.01 -55°C 0.001 0.0001 0.2 0.4 0.6 0.8 1 V , BODY DIODE FORW A RD VOLTAGE (V) 1.2 SD Figure 5. Transfer Characteristics. Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDV301N Rev.F1 Typical Electrical And Thermal Characteristics 30 VDS = 5V I D = 0.2A 20 10V 4 15V CAPACITANCE (pF) V GS , GATE-SOURCE VOLTAGE (V) 5 3 2 C iss 10 C oss 5 3 2 1 f = 1 MHz V GS = 0V 1 0 .1 0 0 0.1 0.2 0.3 0.4 0.5 C rss 0 .5 1 2 5 V , DRAIN TO SOURCE VOLTAGE (V) DS 0.6 10 25 Q g , GATE CHARGE (nC) Figure 8. Capacitance Characteristics. Figure 7. Gate Charge Characteristics. 1 5 ( DS ON )L IM 1m IT 10 0m s 1s 0 .1 10 0 .0 5 VGS = 2.7V 0 .0 2 RθJ A = 357 °C/ W TA = 25°C s 3 2 DC SINGLE PULSE 0 .0 1 0 .5 1 V DS SINGLE PULSE R θJA =357° C/W T A = 25°C 4 s POWER (W) R 0 .2 D I , DRAIN CURRENT (A) 0 .5 1 2 5 10 15 , DRAI N -SOURCE VOLTAGE (V) 25 35 0 0.001 0.01 0.1 1 10 100 300 SINGLE PULSE TIME (SEC) Figure 9. Maximum Safe Operating Area. Figure 10. Single Pulse Maximum Power Dissipation. 1 r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 0.5 D = 0.5 0.2 0 .2 0.1 0 .1 0.05 0.02 0.01 0.005 R θJA (t) = r(t) * R θJA R θJA = 357 °C/W 0 .05 P(pk) 0 .02 0.01 t1 Single Pulse =P * R (t) A θJA Duty Cycle, D = t1 /t2 0.002 0.001 0.0001 t2 TJ - T 0.001 0.01 0.1 t1 , TIM E (sec) 1 10 100 300 Figure 11. Transient Thermal Response Curve. FDV301N Rev.F1 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. Auto-SPM™ PowerTrench® F-PFS™ The Power Franchise® PowerXS™ Build it Now™ FRFET® ® Global Power ResourceSM Programmable Active Droop™ CorePLUS™ ® Green FPS™ QFET CorePOWER™ TinyBoost™ Green FPS™ e-Series™ QS™ CROSSVOLT™ TinyBuck™ Gmax™ Quiet Series™ CTL™ TinyLogic® GTO™ RapidConfigure™ Current Transfer Logic™ ® TINYOPTO™ IntelliMAX™ EcoSPARK TinyPower™ EfficentMax™ ISOPLANAR™ ™ TinyPWM™ Saving our world, 1mW /W /kW at a time™ EZSWITCH™ * MegaBuck™ TinyWire™ ™* SmartMax™ MICROCOUPLER™ TriFault Detect™ SMART START™ MicroFET™ TRUECURRENT™* MicroPak™ SPM® ® µSerDes™ MillerDrive™ STEALTH™ Fairchild® SuperFET™ MotionMax™ Fairchild Semiconductor® SuperSOT™-3 Motion-SPM™ FACT Quiet Series™ UHC® SuperSOT™-6 OPTOLOGIC® ® FACT® OPTOPLANAR Ultra FRFET™ SuperSOT™-8 ® FAST® UniFET™ SupreMOS™ FastvCore™ VCX™ SyncFET™ FETBench™ VisualMax™ Sync-Lock™ PDP SPM™ FlashWriter® * XS™ ®* Power-SPM™ FPS™ tm tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 ©2009 Fairchild Semiconductor Corporation FDV301N Rev.F1 3 www.fairchildsemi.com ® tm