PDFUser Guide - Fairchild Semiconductor

User Guide for
FEBFAN104WMX_T06U005A
Evaluation Board
Fairchild PSR Smart Phone
Battery Charger
Featured Fairchild Products:
FAN104WMX
Direct questions or comments
about this evaluation board to:
“Worldwide Direct Support”
Fairchild Semiconductor.com
© 2012 Fairchild Semiconductor Corporation
FEBFAN104WMX_T06U005A • Rev. 1.0.0
Table of Contents
1. Introduction ............................................................................................................................... 3 1.1. Description ....................................................................................................................... 3
1.2. Features ............................................................................................................................ 3
2. Evaluation Board Specifications ............................................................................................... 4 3. Photographs............................................................................................................................... 5 4. Printed Circuit Board ................................................................................................................ 6 5. Schematic .................................................................................................................................. 7 6. Bill of Materials ........................................................................................................................ 8 7. Transformer and Winding Specifications ................................................................................. 9 8. Test Conditions & Test Equipment......................................................................................... 10 9. Performance of Evaluation Board ........................................................................................... 11 9.1. Input Current .................................................................................................................. 11 9.2. Input Wattage at No-Load Condition ............................................................................. 11 9.3. Startup Time ................................................................................................................... 12 9.4. DC Output Rising Time ................................................................................................. 13 9.5. Conversion Efficiency .................................................................................................... 15 9.6. Output Ripple & Noise ................................................................................................... 16 9.7. Dynamic Response ......................................................................................................... 17 9.8. Over-Power Protection ................................................................................................... 18 9.9. Hold-up Time ................................................................................................................. 19 9.10. Short-Circuit Protection ................................................................................................. 20 9.11. Brownout Test ................................................................................................................ 21 9.12. VDD Voltage Level ......................................................................................................... 21 9.13. Voltage Stress on MOSFET & Rectifier ........................................................................ 24 9.14. Constant-Voltage (CV) and Constant-Current (CC) Curves.......................................... 25 9.15. VS Over-Voltage Protection Test ................................................................................... 26 9.16. Over-Temperature Protection Test (OTP)...................................................................... 26 9.17. Electromagnetic Interference (EMI) Tests ..................................................................... 27 9.18. Surge Test ....................................................................................................................... 29 9.19. Electrostatic Discharge Capability (ESD) Test .............................................................. 29 10. Revision History ..................................................................................................................... 30 © 2012 Fairchild Semiconductor Corporation
2
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
This user guide supports the evaluation kit for the FAN104WMX. It should be used in
conjunction with the FAN104WMX datasheet as well as Fairchild’s application notes and
technical support team. Please visit Fairchild’s website at www.fairchildsemi.com.
1. Introduction
The FAN104WMX has several functions to achieve standby power consumption lower
than 30 mW at 230 VAC. Proprietary Burst Mode with lower operation current under
light-load conditions and a built-in HV startup circuit to reduce startup resistor power
loss both improve performance. By using the FAN104WMX, a smart phone charger can
be implemented with few external components and minimized cost.
This document is an engineering report describing a 5 W power supply using the
FAN104WMX. This power supply targets the smart phone battery charger market with a
<30 mW solution and high efficiency.
1.1.
Description
This highly integrated PWM controller, FAN104WMX, provides several features to
enhance the performance of low-power flyback converters. The proprietary topology
enables simplified circuit design for battery-charger applications. The result is a lower-cost,
smaller and lighter charger compared to a conventional design or a linear transformer. To
minimize standby power consumption, a proprietary Green-Mode function provides offtime modulation to linearly decrease PWM frequency under light-load conditions. Green
Mode assists the power supply in meeting power conservation requirements.
1.2.
Features
















Achieves < 30 mW; Energy Star’s 5-Star Level
Proprietary 500 V High-Voltage JFET Startup Reduces Startup Resistor Loss
Low Operating Current in the Burst Mode: 600 µA
Constant-Voltage (CV) and Constant-Current (CC) Control without Secondary-Side
Feedback Circuitry
Green Mode: PWM Frequency Linearly-Decreasing
PWM Frequency at 85 kHz with Frequency Hopping to Solve EMI Problem
Boundary-Conduction-Mode (BCM) Operation at Lower AC Input Voltage
Cable Compensation in CV Mode
VDD Under-Voltage Lockout (UVLO) Available
Built-in Protections:
Output Short-Circuit Protection
Output Over-Voltage-Protection (VS OVP) with Latch Mode
VDD Over-Voltage-Protection (VDD OVP)
CS Pin Single-Fault Protection
VS Pin Single-Fault Protection
Over-Temperature-Protection (OTP) with Latch Mode
© 2012 Fairchild Semiconductor Corporation
3
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
2. Evaluation Board Specifications
All data for this table was measured at an ambient temperature of 25°C.
Table 1.
Summary of Features and Performance
Description
Symbol
VIN. MIN
90 VAC
Minimum Input Voltage
Input Voltage
VIN.MAX
264 VAC
Maximum Input Voltage
VIN.NOMINAL
110 VAC / 220 VAC
Nominal Input Voltage
Input Frequency
fIN
60 Hz / 50 Hz
Input Line Frequency
VOUT.MIN
4.75 V
Output Voltage
VOUT.MAX
5.25 V
CV: ± 3% Regulation
VOUT.NOMINAL
5V
CC: ± 3% Regulation
Output Current
IOUT.NOMINAL
1.2 A
Output Power
POUT.NOMINAL
6W
Output Power
POUT.MAX
6.3 W
Ripple
VRIPPLE
< 150 mV
Measured: < 95 mV
Eff.MIN
74.85%
Eff.NOMINAL
77.92%
Meets DoE. Standard at
Full Load (73.37%)
TFAN104
< 41°C
TMOSFET
< 66°C
TSD1
< 75°C
TD2
< 32°C
Ttransformer
< 62°C
Efficiency
Temperature
Transformer
© 2012 Fairchild Semiconductor Corporation
Core
Value
EPC-13
4
Comments
At Full Load (Open-Frame)
The core volume of the lowprofile EPC-13 is 66% lower
than the* conventional type of
transformer core.
The height of the low-profile
EPC-13 core is 57% less than
the * conventional type of
transformer core.
*EPCxxx, (refer to page 9)
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
3. Photographs
Figure 1. Photograph (32.4x 26 mm2) Top-View
Figure 2. Photograph (32.4 (H) x 26 mm2(W) ) Bottom-View
Figure 3. Photograph (32.4 (L) x 21 mm2 (H)) Side-View
© 2012 Fairchild Semiconductor Corporation
5
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
4. Printed Circuit Board
Figure 4. Top-Side
Figure 5. Bottom-Side
© 2012 Fairchild Semiconductor Corporation
6
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
5. Schematic
Figure 6. Evaluation Board Schematic
© 2012 Fairchild Semiconductor Corporation
7
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
6. Bill of Materials
Component
Series
Part Name
Specification
02-3510005-10
DIP Res. 1 W-S 10 Ω ±5%
TAPING
1
R1
02-5112731-00
SMD Res. 0603 127 kΩ ±1%
REEL
1
R9
02-5123221-00
SMD Res. 0603 23.2 kΩ ±1%
REEL
1
R6
02-5151121-00
SMD Res. 0603 51.1 kΩ ±1%
REEL
1
R5
02-5210105-00
SMD Res. 0805 100 Ω ±5%
REEL
1
R10
02-5210405-00
SMD Res. 0805 100 kΩ ±5%
REEL
1
RHV
Qty Part No.
02-5212005-00
SMD Res. 0805 12 Ω ±5%
REEL
1
R13
02-5222105-00
SMD Res. 0805 220 Ω ±5%
REEL
1
R8
02-5224A05-00
SMD Res. 0805 2.4 Ω ±5%
REEL
1
R11
02-5227A05-00
SMD Res. 0805 2.7 Ω ±5%
REEL
1
R12
02-5233205-00
SMD Res. 0805 3.3 kΩ ±5%
REEL
2
R2, R3
02-5236011-00
SMD Res. 0805 3.6 kΩ ±1%
REEL
1
R14
02-52910A5-00
SMD Res. 0805 91 Ω ±5%
REEL
1
R4
02-5315405-00
SMD Res. 1206 150 kΩ ±5%
REEL
1
R7
03-3218031-00
SMD NPO 0603 18 P 50 V ±10%
REEL
1
C6
03-3310239-00
0805 X7R ±10% 102 P 50 V
REEL
1
C7
03-3310439-00
0805 X7R ±10% 104 P 50 V
REEL
1
C8
03-332201A-00
0805 X5R ±20% 22 µF 25 V
No: GRM21BR61E226ME44
1
C4
03-3339339-00
0805 X7R ±10% 393 P 50 V
REEL
1
C5
03-3447179-00
1206 X7R ±10% 471 P 1 kV
REEL
1
C3
03-5068AC1-01
Electrolytic Cap. 6 µ8 400 V 105°C
8*16 RADIAL KM Unpackaged
2
C1, C2
03-7033101-01
OCVZ Cap. 330 µ 6.3 V 105°C
OVZ331M0JTR-0606,6.3*5.9 mm
1
C9
04-1000328-00
SMD Inductor
TRN0328(10 µH ±20%0805)
No:LQM21FN100M80L,
Supertrade
1
L0
04-1136102-00
DIP Inductor 1 mH ±10%
EC36-102 K
1
L1
04-2000329-00
Transformer TRN0329
EPC13, Horizontal, Lm=1.3 mH
1
TX1
07-03070F1-00
SMD Diode MMSD3070
Fairchild Semiconductor
1
D2
07-0L41481-00
SMD Diode LL4148
1 A/100 V SOD80
1
D3
07-0400711-00
SMD Diode CGRM4007-HF
1 A/1000 V,SOD-123,COMCHIP
1
D1
07-110U450-11
SMD Schottky Diode SBR10U45SP5
10 A SBR, PowerDIR5
1
SD1
07-1MB6S0F-11
SMD Bridge Rectifier MB6S
Fairchild Semiconductor
1
BD1
09-12N600F-00
MOSFET FQU2N60CTU
Fairchild Semiconductor
1
Q1
11-EN104WF-11
SMD IC FAN104WMX
Fairchild Semiconductor
1
U1
38-0000002-00
CANADA Silicone ES2482W 333 ml
42-J100432-10
USB JC0010 4411-02004L
0
Short Type 10*13 mm
1
CN1
L1, R1,
C9
54-1020653-00
MCH0653
Heat-Shrinkable Tube 6ψ10 mm
3
70-PLM0185-03
PCB PLM0185(B) REV 3.
For FAN104 5 W 1*5 Connected
1
© 2012 Fairchild Semiconductor Corporation
8
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
7. Transformer and Winding Specifications


Core: EPC-13 (PC-40)
Bobbin: 10 pins
Figure 7. Transformer Specifications & Construction
Table 2.
Winding Specifications
Pin (S  F)
No.
Wire
Turns
1→2
W1
2UEW 0.12φ*1
5→4
4 →NC
W4
Fly+ → Fly-
Table 3.
2
Layer-1: 48 Turns
Layer-2: 47 Turns
Layer-3: 23 + 23 Turns (Parallel)
Layer-4: 14 + 14 Turns (Parallel)
2 Line Parallel
37
2UEW 0.18φ*1
16
2
TEX-E 0.45φ*1
10
2
Core Rounding
Tape
Core Shielding
Notes
132
2 → NC
W2
Isolation
Tape
Turns
Cooper Sheet
3
1
2
Cooper shielding should be
close with core
Electrical Characteristics
Item
Pin
Specification
Remark
Inductance
1-2
1.3 mH ±10%
1 kHz, 1 V
© 2012 Fairchild Semiconductor Corporation
9
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
8. Test Conditions & Test Equipment
Table 4.
Test Conditions & Test Equipment
Evaluation Board #
Test Date
Test Temperature
Test Equipment
© 2012 Fairchild Semiconductor Corporation
FEBFAN104WMX_TU06005A
2012-08-15
25°C
AC Power Source: 6801 by EXTECH ELECTRONICS
Power Analyzer: WT210 by YOKOGAWA
Electronic Load: 63030 by CHROMA
Automatic Power Tester: 6312A & 63102A by CHROMA
Multi Meter: BM817a by BRYMEN
Oscilloscope: 24MXs-B by LeCroy
EMI Test Receiver: ESCS30 by ROHDE & SCHWARZ
Thermometer: Therma CAM SC640 by FLIR SYSTEMS
10
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9. Performance of Evaluation Board
9.1.
Input Current
Test Conditions
Measure the AC input current at maximum loading.
Table 5.
9.2.
Test Results
Input Voltage
Input Current
90 VAC / 60 Hz
122.2 mA
264 VAC / 50 Hz
61.1 mA
Input Wattage at No-Load Condition
Test Conditions
Measure the input wattage and output voltage at no load.
Table 6.
Test Results
Input Voltage
Input wattage
Output Voltage
90 VAC / 60 Hz
25.1 mW
5.15 V
115 VAC / 60 Hz
25.4 mW
5.19 V
230 VAC / 50 Hz
26.7 mW
5.11 V
264 VAC / 50 Hz
28.6 mW
5.13 V
Specification
< 30 mW
Measured Waveforms
Figure 8. 90 VAC / 60 Hz, C2 [VGS] at No Load
© 2012 Fairchild Semiconductor Corporation
11
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
Measured Waveforms
Figure 9. 264 VAC / 50 Hz, C2 [VGS] at No Load
9.3.
Startup Time
Test Conditions
Set the output at maximum loading. Measure the time interval between the AC line on
condition and a stable output condition.
Table 7.
Test Results
Input Voltage
Startup Time
90 VAC / 60 Hz
150 ms
264 VAC / 50 Hz
73 ms
Specification
<3s
Measured Waveforms
Figure 10. 90 VAC / 60 Hz, C1 [VO], C4 [VAC] at Maximum Load
© 2012 Fairchild Semiconductor Corporation
12
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
Figure 11. 264 VAC / 50 Hz, C1 [VO], C4 [VAC] at Maximum Load
9.4.
DC Output Rising Time
Test Conditions
Set the output at maximum load and no load. Measure the time interval between 10% and
90% output during startup.
Table 8.
Test Results
Input Voltage
No Load
Maximum Load
90 VAC / 60 Hz
2.88 ms
3.50 ms
264 VAC / 50 Hz
2.64 ms
3.59 ms
Specification
< 20 ms
Measured Waveforms
Figure 12. 90 VAC / 60 Hz, C1 [VO], C2 [VGS] at No Load
© 2012 Fairchild Semiconductor Corporation
13
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
Figure 13. 90 VAC / 60 Hz, C1 [VO], C2 [VGS] at Maximum Load
Figure 14. 264 VAC / 50 Hz, C1 [VO], C2 [VGS] at No Load
Figure 15. 264 VAC / 50 Hz, C1 [VO], C2 [VGS] at Maximum Load
© 2012 Fairchild Semiconductor Corporation
14
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.5.
Conversion Efficiency
Test Conditions
Measure the input power and output power at maximum loading.
Table 9.
Test Results
Input Voltage
Input Power
Output Power
Efficiency
90 VAC / 60 Hz
6.428 W
5.02 W
78.09%
115 VAC / 60 Hz
6.454 W
5.10 W
79.02%
230 VAC / 50 Hz
6.620 W
5.09 W
76.97%
264 VAC / 50 Hz
6.585 W
5.11 W
77.60%
Specification
> 73.37%
Table 10. Average Efficiency Test Results
Input Voltage
Efficiency
25% Load 50% Load 75% Load 100% Load
Avg.
115 VAC / 60 Hz
75.40%
79.50%
78.69%
79.02%
78.15%
230 VAC / 50 Hz
70.00%
76.44%
76.08%
76.87%
74.85%
Specification
> 73.37%
Figure 16. Average Efficiency Test Results
© 2012 Fairchild Semiconductor Corporation
15
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.6.
Output Ripple & Noise
Test Condition
Ripple and noise are measured by using a 20 MHz bandwidth-limited oscilloscope with a
10 µF capacitor paralleled with a high-frequency 0.1 µF capacitor across each output.
Table 11. Test Results
Input Voltage
Output Ripple at
No Load
Output Ripple at
Maximum Load
90 VAC / 60 Hz
18.6 mV
81.4 mV
115 VAC / 60 Hz
21.2 mV
83.2 mV
230 VAC / 50 Hz
26.7 mV
90.3 mV
264 VAC / 50 Hz
27.2 mV
95.0 mV
Specification
< 150 mV
Measured Waveforms
Figure 17. 90 VAC / 60 Hz, C1 [VO] at Maximum Load
Figure 18. 264 VAC / 50 Hz, C1 [VO] at Maximum Load
© 2012 Fairchild Semiconductor Corporation
16
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.7.
Dynamic Response
Test Conditions
Dynamic loading (0 %~50 %) of the full load, 5 ms duty cycle, 2.5 A/µs rise/fall time.
Table 12. Test Results
Input Voltage
Overshoot
Undershoot
90 VAC / 60 Hz
5.218 V
4.034 V
264 VAC / 50 Hz
5.206 V
4.028 V
Measured Waveforms
Figure 19. 90 VAC / 60 Hz, C1 [VO] at Dynamic Response
Figure 20. 264 VAC / 50 Hz, C1 [VO] at Dynamic Response
© 2012 Fairchild Semiconductor Corporation
17
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.8.
Over-Power Protection
Test Conditions
Increase the output loading gradually. Measure the output power.
Table 13. Test Results
© 2012 Fairchild Semiconductor Corporation
Input Voltage
Output Power
90 VAC / 60 Hz
5.82 W
115 VAC / 60 Hz
5.85 W
230 VAC / 50 Hz
5.92 W
264 VAC / 50 Hz
5.94 W
18
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.9.
Hold-up Time
Test Conditions
Set the output at maximum loading. Measure the time interval between AC line off
condition and the output voltage falling to the lower limit of rated value. The AC
waveform should be off at zero degrees.
Table 14. Test Results
Input Voltage
Hold-up Time
90 VAC / 60 Hz
10.9 ms
264 VAC / 50 Hz
133 ms
Measured Waveforms
Figure 21. 90 VAC / 60 Hz, C1 [VO], C4 [VAC] at Maximum Load
Figure 22. 264 VAC / 50 Hz, C1 [VO], C4 [VAC] at Maximum Load
© 2012 Fairchild Semiconductor Corporation
19
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.10. Short-Circuit Protection
Test Conditions
Short the output of the power supply. The power supply should enter Hiccup Mode
protection. Input power should be less than 2 W.
Table 15. Test Results
Input Voltage
Input Power at Maximum Input Power at Minimum
Specification
Load
Load
90 VAC / 60 Hz
0.361 W
0.372 W
264 VAC / 50 Hz
0.969 W
0.991 W
<2 W
Measured Waveforms
Figure 23. 264 VAC / 50 Hz, C1 [VO], C2 [VGS], C3 [VDD] at No Load Output Short
Figure 24. 264 VAC / 50 Hz, C1 [VO], C2 [VGS], C3 [VDD] at Maximum Load Output Short
© 2012 Fairchild Semiconductor Corporation
20
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.11. Brownout Test
Test Conditions
Input Voltage
Input Wattage
Output Voltage
90 VAC / 60 Hz
6.832 W
5.164 V
85 VAC / 60 Hz
6.841 W
5.160 V
80 VAC / 60 Hz
6.860 W
5.154 V
75 VAC / 60 Hz
6.903 W
5.140 V
70 VAC / 60 Hz
6.97 W
5.124 V
65 VAC / 60 Hz
7.08 W
5.096 V
63 VAC / 60 Hz
Brownout
Brownout
Recovery Voltage
Input Power
Output Voltage
64 VAC / 60 Hz
7.12 W
5.09 V
Table 16. Test Results
9.12. VDD Voltage Level
Table 17. Test Results
VDD Level at VDD Level at
No Load
Max. Load
Input
VDD Level
at OPP
Max. VDD
Level at
Specification
Output Short
90 VAC / 60 Hz
7.5 V
11.4 V
11.9 V
16.4 V
264 VAC / 50 Hz
7.4 V
11.8 V
12.1 V
16.4 V
< 24 V
Measured Waveforms
Figure 25. 90 VAC / 60 Hz, C1 [VO], C2 [VGS], C3 [VDD] at No Load
© 2012 Fairchild Semiconductor Corporation
21
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
Figure 26. 264 VAC / 50 Hz, C1 [VO], C2 [VGS], C3 [VDD] at No Load
Figure 27. 90 VAC / 60 Hz, C1 [VO], C2 [VGS], C3 [VDD] at Maximum Load
Figure 28. 264 VAC / 50 Hz, C1 [VO], C2 [VGS], C3 [VDD] at Maximum Load
© 2012 Fairchild Semiconductor Corporation
22
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
Figure 29. 90 VAC /60 Hz, C1 [VO], C2 [VGS], C3 [VDD] at Output Short
Figure 30. 264 VAC / 50 Hz, C1 [VO], C2 [VGS], C3 [VDD] at Output Short
© 2012 Fairchild Semiconductor Corporation
23
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.13. Voltage Stress on MOSFET & Rectifier
Test Conditions
Measure the voltage stress on the MOSFET and the secondary rectifier under the below
specified conditions.
Table 18. Test Results
Stress On
Stress On
Rating
Rating
Output Rectifier
MOSFET
Input Voltage
90 VAC / 60 Hz at Maximum Load
295 V
19.7 V
90 VAC / 60 Hz at Maximum Load, Startup
296 V
19.7 V
90 VAC / 60 Hz at Maximum Load,
Output Short
302 V
20.4 V
600V
264 VAC / 50 Hz at Maximum Load
554 V
264 VAC / 50 Hz at Maximum Load, Startup
554 V
42.4 V
42.4 V
264 VAC / 50 Hz at Maximum Load,
Output Short
564 V
45 V
264 VAC / 50 Hz at Maximum Load, Turn Off
564 V
45 V
45 V
Measured Waveforms
Figure 31.
264 VAC / 50 Hz, C3 [VDS], C4 [VDIODE] at
Maximum Load
© 2012 Fairchild Semiconductor Corporation
24
Figure 32.
264 VAC/50 Hz, C3 [VDS], C4 [VDIODE] at
Output Short
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.14. Constant-Voltage (CV) and Constant-Current (CC) Curves
Figure 33. Constant – Voltage (CV) Curves
Figure 34. Constant – Current (CC) Curves
© 2012 Fairchild Semiconductor Corporation
25
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.15. VS Over-Voltage Protection Test
Test Conditions
Measure the maximum output voltage when the auxiliary feedback signal is disabled (Vs
pin low-side resistor opened).
Table 19. Test Results
Input Voltage
Maximum Output at
No Load
Maximum Output at
Maximum Load
90 VAC / 60 Hz
6.8 V
0V
264 VAC / 50 Hz
6.8 V
0V
9.16. Over-Temperature Protection Test (OTP)
Test Conditions
Measure the output voltage and the MOSFET gate voltage when the IC temperature
increases above 140°C.
Measured Waveforms
Figure 35. 90 VAC / 6 0Hz, C1 [VO], C2 [VGS], C3 [VDD] at Maximum Load
Figure 36. 264 VAC / 50 Hz, C1 [VO], C2 [VGS], C3 [VDD] at Maximum Load
© 2012 Fairchild Semiconductor Corporation
26
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.17. Electromagnetic Interference (EMI) Tests
Att
dBµV
1
100
10
dB
RBW
MT
PREAMP
9 kHz
10 ms
OFF
MHz
Marker
1 [T1 ]
36.30 dBµV
150.000000000 kHz
10
MHz
90
1 PK
MAXH
2 AV
MAXH
80
TDF
70
EN55022Q
60
PRN
EN55022A
50
6DB
1 40
30
20
10
0
150
Comment:
Date:
kHz
2-230N
25.JUL.2012
30
MHz
15:15:03
Figure 37. Line at 115 VAC
Att
dBµV
1
100
10
dB
RBW
MT
PREAMP
9 kHz
10 ms
OFF
MHz
Marker
1 [T1 ]
35.83 dBµV
150.000000000 kHz
10
MHz
90
1 PK
MAXH
2 AV
MAXH
80
TDF
70
EN55022Q
60
PRN
EN55022A
50
6DB
1 40
30
20
10
0
150
Comment:
Date:
kHz
2-230N
25.JUL.2012
30
MHz
15:17:02
Figure 38. Neutral at 115 VAC
© 2012 Fairchild Semiconductor Corporation
27
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
Att
dBµV
1
100
10
dB
RBW
MT
PREAMP
9 kHz
10 ms
OFF
MHz
Marker
1 [T1 ]
35.44 dBµV
150.000000000 kHz
10
MHz
90
1 PK
MAXH
80
2 AV
MAXH
TDF
70
EN55022Q
60
PRN
EN55022A
50
6DB
1
40
30
20
10
0
150
Comment:
Date:
kHz
2-230N
25.JUL.2012
30
MHz
15:21:17
Figure 39. Line at 230 VAC
Att
dBµV
1
100
10
dB
RBW
MT
PREAMP
9 kHz
10 ms
OFF
MHz
Marker
1 [T1 ]
36.36 dBµV
150.000000000 kHz
10
MHz
90
1 PK
MAXH
2 AV
MAXH
80
TDF
70
EN55022Q
60
PRN
EN55022A
50
6DB
1 40
30
20
10
0
150
Comment:
Date:
kHz
2-230N
25.JUL.2012
30
MHz
15:19:09
Figure 40. Neutral at 230 VAC
© 2012 Fairchild Semiconductor Corporation
28
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
9.18. Surge Test
Table 20. Test Results
Mode
Polarity
Phase
±
0°
±
90°
L-N
Voltage
Condition
PASS
PASS
2.2 kV
±
180°
PASS
±
270°
PASS
±
0°
PASS
±
90°
L-PE
PASS
4.4 kV
±
180∘
PASS
±
270°
PASS
±
0°
PASS
±
90°
N-PE
PASS
4.4 kV
±
180°
PASS
±
270°
PASS
9.19. Electrostatic Discharge Capability (ESD) Test
Table 21. Test Results
Mode
Polarity
Voltage
Condition
Air
±
16.5 kV
PASS
Contact
±
8.8 kV
PASS
© 2012 Fairchild Semiconductor Corporation
29
FEB-FAN104WMX_T06U005A • Rev. 1.0.0
10. Revision History
Rev.
Date
Description
1.0.0
October 2012
Initial Release
WARNING AND DISCLAIMER
Replace components on the Evaluation Board only with those parts shown on the parts list (or Bill of Materials) in the Users’ Guide. Contact an
authorized Fairchild representative with any questions.
This board is intended to be used by certified professionals, in a lab environment, following proper safety procedures. Use at your own risk. The
Evaluation board (or kit) is for demonstration purposes only and neither the Board nor this User’s Guide constitute a sales contract or create any kind
of warranty, whether express or implied, as to the applications or products involved. Fairchild warrantees that its products meet Fairchild’s published
specifications, but does not guarantee that its products work in any specific application. Fairchild reserves the right to make changes without notice to
any products described herein to improve reliability, function, or design. Either the applicable sales contract signed by Fairchild and Buyer or, if no
contract exists, Fairchild’s standard Terms and Conditions on the back of Fairchild invoices, govern the terms of sale of the products described herein.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO
IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR
USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR
THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a)
are intended for surgical implant into the body, or (b) support or
sustain life, or (c) whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website,
www.fairchildsemi.com, under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing
counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation,
substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to
protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts
either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy
either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for
handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized
Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
EXPORT COMPLIANCE STATEMENT
These commodities, technology, or software were exported from the United States in accordance with the Export Administration Regulations for the
ultimate destination listed on the commercial invoice. Diversion contrary to U.S. law is prohibited.
U.S. origin products and products made with U.S. origin technology are subject to U.S Re-export laws. In the event of re-export, the user will be
responsible to ensure the appropriate U.S. export regulations are followed.
© 2012 Fairchild Semiconductor Corporation
30
FEB-FAN104WMX_T06U005A • Rev. 1.0.0