8 7 6 5 4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORP. AND IS SUBMITTED FOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. DO NOT SCALE DRAWING REVISIONS ZONE REV R 534.42 21.04 1 DESCRIPTION DATE EC#6060 APPROVED JTD 6/11/15 430.10 16.93 482.60 19.00 MICRO SWITCH LOCATION. SEE NOTES FOR WIRING INSTRUCTIONS. D D 6 HANDLE CAN BE LOOSENED AND ROTATED IN 90 DEGREE INCREMENTS. 132.08 5.20 352.46 13.88 252.99 9.96 32.51 1.28 121.31 4.78 88.90 3.50 44.45 1.75 464.95 18.31 362.79 14.28 C C B A 6 IF KEYING IS REQUIRED USE VPC KEYING KIT PART NUMBER 310118112. SEE TABLE FOR KEYING OPTIONS. 5. SOME ASSEMBLY REQUIRED. 4. WEIGHT: APROXIMATELY 20 POUNDS. ALUMINUM AND STEEL. 3. FOR DEEPER RACKS USE P/N 310113413, 1.5" RECEIVER EXTENSION KIT. 2. MICROSWITCH WIRES NOT SHOWN. COLOR CODE AS FOLLOWS: RED- NC WHITE- NO BLACK- COMMON 1 SOLIDWORKS DRAWING FILE B FOR APPLICATION, USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM. NOTES: 8 7 6 5 4 CUSTOMER DRAWING - CUSTOMER DRAWING DIMENSIONS ARE SHOWN AS: [millimeters] INCHES CONTRACT NO. SIGNATURES DATE DR E. HUBBARD 5/5/04 CHK R. HERRON E. HUBBARD 5/5/04 REMOVE BURRS. BREAK SHARP EDGES. ENG MATERIAL PROD 5/5/04 A VIRGINIA PANEL CORPORATION WWW.VPC.COM RECEIVER, G12, 12 MODULE FIXED RACK WITH 15" PLATFORM ASSY FINISH QA SIZE D 18117 APPD 3 FSCM NO. SCALE: 2 1:4 DWG NO. 310104338 310104338 5/5/04 1 REV R SHEET 1 OF 1