RCA Vishay Automotive Grade Thick Film, Rectangular Chip Resistors FEATURES • Metal glaze on high quality ceramic with protective overglaze • Sulfur resistant • Superior resistance against H2S-atmosphere than standard Ag contacts • Solder contacts on Ni barrier layer • Excellent stability (ΔR/R ≤ ± 0.5 % for 1000 h at 70 °C) different environmental conditions • High volume product suitable for commercial and special applications • Automotive Grade = sulfur resistant STANDARD ELECTRICAL SPECIFICATIONS SIZE POWER RATING P70 °C W INCH METRIC CECC 40401-802/EIA-575 LIMITING ELEMENT VOLTAGE MAX. V≅ 0.063 50 MODEL RCA0402 0402 1005 TEMPERATURE TOLERANCE RESISTANCE RANGE E-SERIES COEFFICIENT % ppm/K Ω ± 50 ± 100 ± 100 ± 200 ± 200 ± 0.5, ± 1 ± 0.5 ±1 ±1 ±5 100R - 1M0 10R - 1M0 10R - 5M6 1R0 - 9R76 1R0 - 10M 24 + 96 24 + 96 24 + 96 24 + 96 24 ± 50 ± 100 ± 200 ± 200 ± 0.5, ± 1 ± 0.5, ± 1 ±1 ±5 100R - 10M 10R - 10M 1R0 - 9R76 1R0 - 10M 24 + 96 24 + 96 24 + 96 24 ± 50 ± 100 ± 100 ± 200 ± 0.5, ± 1 ± 0.5 ±1 ±5 100R - 10M 10R - 10M 1R0 - 10M 1R0 - 10M 24 + 96 24 + 96 24 + 96 24 ± 50 ± 100 ± 100 ± 200 ± 0.5, ± 1 ± 0.5 ±1 ±5 100R - 10M 10R - 10M 1R0 - 10M 1R0 - 10M 24 + 96 24 + 96 24 + 96 24 ± 50 ± 100 ± 100 ± 200 ± 0.5, ± 1 ± 0.5 ±1 ±5 100R - 1M0 100R - 1M0 1R0 - 1M0 1R0 - 1M0 24 + 96 24 + 96 24 + 96 24 ± 50 ± 100 ± 100 ± 200 ± 0.5, ± 1 ± 0.5 ±1 ±5 100R - 2M2 100R - 2M2 1R0 - 2M2 1R0 - 2M2 24 + 96 24 + 96 24 + 96 24 ± 50 ± 100 ± 100 ± 200 ± 0.5, ± 1 ± 0.5 ±1 ±5 100R - 10M 10R - 10M 1R0 - 10M 1R0 - 10M 24 + 96 24 + 96 24 + 96 24 ± 50 ± 100 ± 100 ± 200 ± 0.5, ± 1 ± 0.5 ±1 ±5 100R - 10M 10R - 10M 1R0 - 10M 1R0 - 10M 24 + 96 24 + 96 24 + 96 24 Zero-Ohm-Resistor: Rmax. = 40 mΩ Imax. = 1 A RCA0603 0603 1608 0.10 75 Zero-Ohm-Resistor: Rmax. = 40 mΩ Imax. = 1.5 A RCA0805 0805 2012 0.125 150 Zero-Ohm-Resistor: Rmax. = 40 mΩ Imax. = 2 A RCA1206 1206 3216 0.25 200 Zero-Ohm-Resistor: Rmax. = 20 mΩ Imax. = 2.5 A RCA1210 1210 3225 0.33 200 Zero-Ohm-Resistor: Rmax. = 20 mΩ Imax. = 2.5 A RCA1218 1218 3246 1.0 200 Zero-Ohm-Resistor: Rmax. = 20 mΩ Imax. = 4 A RCA2010 2010 5025 0.50 400 Zero-Ohm-Resistor: Rmax. = 20 mΩ Imax. = 3 A RCA2512 2512 6332 1.0 500 Zero-Ohm-Resistor: Rmax. = 20 mΩ Imax. = 4 A Notes: • Ask about further value ranges • Marking and packaging: see appropriate catalog or web pages • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material www.vishay.com 124 For technical questions in Europe, contact: [email protected] For technical questions in Americas/Asia, contact: [email protected] Document Number: 20034 Revision: 14-Feb-08 RCA Automotive Grade Thick Film, Rectangular Chip Resistors Vishay TECHNICAL SPECIFICATIONS PARAMETER UNIT RCA0402 Rated Dissipation at 70 °C W 0.063 (CECC 40401 | EIA 575) Limiting Element Voltage (2) V≅ 50 Insulation Voltage (1 min) Vpeak > 75 Thermal Resistance K/W ≤ 870 (1) Insulation Resistance Ω Category Temperature Range °C Failure Rate h-1 Weight/1000 pieces g 0.65 Notes: (1) Measuring conditions in acc. to CECC 40401 (2) Rated voltage: PxR (3) Depending on solder pad dimensions RCA0603 RCA0805 RCA1206 RCA1210 RCA1218 RCA2010 RCA2512 0.10 0.125 0.25 0.33 1.0 0.5 1.0 75 > 100 ≤ 550 (1) 150 > 200 ≤ 440 (1) 200 > 300 (3) 400 > 300 ≤ 88 (3) 500 > 300 ≤ 65 (3) 2 5.5 29.5 25.5 40.5 200 200 > 300 > 300 ≤ 220 (1) ≤ 140 (3) 9 > 10 - 55 to + 125 (+ 155) 0.3 × 10-9 10 16 DIMENSIONS SIZE SOLDER PAD DIMENSIONS [in millimeters] REFLOW SOLDERING WAVE SOLDERING a b l a b l 0.4 0.6 0.5 DIMENSIONS [in millimeters] INCH METRIC 0402 1005 L 1.0 ± 0.05 W 0.5 ± 0.05 H T1 0.35 ± 0.05 0.25 ± 0.05 0603 1608 1.55 + 0.10 - 0.05 0805 2012 0.85 ± 0.1 0.45 ± 0.05 0.3 ± 0.2 2.0 + 0.20 - 0.10 1.25 ± 0.15 0.45 ± 0.05 0.3 1206 3216 3.2 + 0.10 - 0.20 1.6 ± 0.15 0.55 ± 0.05 1210 3225 3.2 ± 0.2 1218 3246 3.2 2010 2512 5025 6332 0.3 ± 0.2 0.5 0.9 1.0 0.9 0.9 1.0 + 0.20 - 0.10 0.3 ± 0.2 0.7 1.3 1.2 0.9 1.3 1.3 0.45 ± 0.2 0.4 ± 0.2 0.9 1.7 2.0 1.1 1.7 2.3 2.5 ± 0.2 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 0.9 2.5 2.0 1.1 2.5 2.2 4.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 1.05 4.9 1.9 1.25 4.8 1.9 2.5 ± 0.15 3.15 ± 0.15 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 0.6 ± 0.2 0.6 ± 0.2 1.0 1.0 2.5 3.2 3.9 5.2 1.2 1.2 2.5 3.2 3.9 5.2 + 0.10 - 0.20 5.0 ± 0.15 6.3 ± 0.2 T2 0.2 ± 0.1 PART NUMBER AND PRODUCT DESCRIPTION RCA - SERIES PART NUMBERING: RCA080510K0FKTA R C A MODEL RCA 0 8 SIZE 0402 0603 0805 1206 1210 1218 2010 2512 0 5 1 0 K 0 F K T A PACKAGING (1) VALUE TOLERANCE TCR R = Decimal K= Thousand M = Million 1K32 = 1.32 kΩ 10R0 = 10 Ω 0000 = Jumper D = ± 0.5 % F = ± 1.0 % J = ± 5.0 % H = ± 50 ppm/K K = ± 100 ppm/K N = ± 200 ppm/K TA = RT1 TB = RT5 TC = RT6 TD = RT7 TF = R02 SPECIAL TG = R67 TH = R82 TK = RT9 BA = B27 Up to 2 digits PRODUCT DESCRIPTION: RCA0805 10K 1 % 100 RT1 RCA0805 10K 1% MODEL RESISTANCE VALUE 49R9 = 49.9 Ω 3011 = 3.01 kΩ RCA0402 RCA0603 RCA0805 RCA1206 RCA1210 RCA1218 RCA2010 RCA2512 100 RT1 TOLERANCE TCR ± 0.5 % ±1% ±5% ± 50 ppm/K ± 100 ppm/K ± 200 ppm/K PACKAGING (1) RT1 R67 RT5 R82 RT6 RT9 RT7 B27 R02 Notes: (1) Please refer to table PACKAGING, see next page • Products can be ordered either using the PRODUCT DESCRIPTION or PART NUMBER Document Number: 20034 Revision: 14-Feb-08 For technical questions in Europe, contact: [email protected] For technical questions in Americas/Asia, contact: [email protected] www.vishay.com 125 RCA Automotive Grade Thick Film, Rectangular Chip Resistors Vishay PACKAGING REEL MODEL BULK PACKING CODE TAPE WIDTH DIAMETER PIECES/REEL PITCH PAPER RCA0402 RCA0603 RCA0805 RCA1206 RCA1210 180 mm/7" 10 000 2 mm RT7 330 mm/13" 50 000 2 mm RF4 180 mm/7" 5000 4 mm RT1 255 mm/10" 10 000 4 mm RT5 330 mm/13" 20 000 4 mm RT6 180 mm/7" 5000 4 mm RT1 255 mm/10" 10 000 4 mm RT5 330 mm/13" 20 000 4 mm RT6 180 mm/7" 5000 4 mm RT1 255 mm/10" 10 000 4 mm RT5 330 mm/13" 20 000 4 mm RT6 180 mm/7" 5000 4 mm RT1 330 mm/13" 20 000 4 mm RT6 BLISTER 8 mm 8 mm 8 mm 8 mm 12 mm 180 mm/7" 4000 4 mm RT9 RCA2010 12 mm 180 mm/7" 4000 4 mm R02 2000 8 mm R67 12 mm 180 mm/7" 4000 4 mm R82 www.vishay.com 126 PIECES CODE 50 000 B27 25 000 B27 10 000 B27 8 mm RCA1218 RCA2512 BULK FEEDING MAGAZINE PIECES/MAGAZINE For technical questions in Europe, contact: [email protected] For technical questions in Americas/Asia, contact: [email protected] Document Number: 20034 Revision: 14-Feb-08 RCA Automotive Grade Thick Film, Rectangular Chip Resistors Vishay PERFORMANCE TEST RESULTS % TEST CONDITIONS OF TEST 0402 0603 0805 1206 1210 1218 2010 2512 1000 h at 70 °C, 1.5 h ON, 0.5 h OFF ≤ ± 1.0 ≤ ± 0.5 ≤ ± 1.0 1000 h at 125 °C without load ≤ ± 1.0 ≤ ± 0.5 ≤ ± 1.0 ≤ ± 0.25 ≤ ± 0.25 ≤ ± 0.5 ≤ ± 0.25 ≤ ± 0.25 ≤ ± 0.5 56 days at 40 °C and 93 % relative humidity ≤ ± 1.0 ≤ ± 0.5 ≤ ± 1.0 10 s at 260 °C solder bath temperature ≤ ± 0.25 ≤ ± 0.25 ≤ ± 0.5 Endurance Test at 70 °C IEC 60115-1 4.25.1 Endurance at UCT IEC 60115-1 4.25.3 Overload Test Short time overload 2.5 x rated voltage or ≤ 2 x limiting element voltage. IEC 60115-1 4.13 Thermal Shock Rapid change between upper and lower category IEC 60115-1 4.19; IEC 60068-2-14; temperature Damp Heat Steady State IEC 60115-1 4.24; IEC 60068-2-3 Resistance to Soldering Heat IEC 60115-1 4.18; IEC 60068-2-20 Note: • For more details please refer to datasheet D../CRCW Document Number: 20034 Revision: 14-Feb-08 For technical questions in Europe, contact: [email protected] For technical questions in Americas/Asia, contact: [email protected] www.vishay.com 127 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000