AC/DC Power Modules TMM 24 Series, 24 Watt CB Features ◆ Fully encapsulated low profile plastic UL 508 Scheme UL 60950-1 UL 60950-1 UL 60601-1 ES 60601-1 casing in PCB- or chassis mount version ◆ 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition ◆ IT and industrial safety according to IEC/EN/UL 60950-1 and UL 508 ◆ Ready to meet ErP directive <0.3W no load power consumption ◆ -40°C start-up temperature ◆ Safety class II prepared ◆ Protection against over-temperature overload and short circuit ◆ 3-year product warranty The TMM 24 Series of fully encapsulated 24 Watt AC/DC power supply modules feature a reinforced/double I/O isolation system according to latest medical safety standards 60601-3 3rd edition for 2 x MOPP (Means Of Patient Protection). The high efficiency and the use of highest grade components make the units suitable for an operating temperature range of –40°C to +65°C while it goes up to 80°C with 50% load derating. EMI/EMC characteristics and the safety approval package qualify these modules not only for medical devices but also for demanding applications in transportation systems and for equipment in industrial an commercial environment. Also see: TMM 40 Series, 40 Watt www.tracopower.com/products/tmm40.pdf TMM 60 Series, 60 Watt www.tracopower.com/products/tmm60.pdf 24 Watt Models Order code PCB mount Chassis mount Output power max. TMM 24105 TMM 24105C 15 W TMM 24112 TMM 24112C 12 VDC / 2000 mA 83 % TMM 24115 TMM 24115C 15 VDC / 1600 mA 82 % TMM 24124 TMM 24124C TMM 24212 TMM 24212C +12 VDC / 1000 mA –12 VDC / 1000 mA 84 % TMM 24215 TMM 24215C +15 VDC / 800 mA –15 VDC / 800 mA 84 % http://www.tracopower.com 24 W Output 1 5.0 VDC / 3000 mA 77 % 24 VDC / 1000 mA Output 2 Efficiency 85 % Page 1 of 5 AC/DC Power Modules TMM 24 Series 24 Watt Input Specifications Input voltage – nominal 100 – 240 VAC – AC range (universal input) 85 – 264 VAC – DC range 120 – 370 VDC Input frequency 47 – 440 Hz Input current at full load (115 VAC / 230 VAC nominal input) 5.0 VDC model: 285 mA / 170 mA typ. other models: 425 mA / 255 mA typ Leakage current 80 µA typ. No-load power consumption <0.3 W Internal fuse T2A 250VAC (both life and neutral) Output Specifications Voltage set accuracy ±2% typ. Minimum load no minimum load required Regulation – Input variation 0.5% typ. – Load variation (0-100%) single output models: 0.5% typ. dual output models: 2.5% typ. Temperature coefficient 0.02 %/°C Ripple and noise (20 MHz bandwidth) 5.0 VDC model: 1.8% of Vout [Vp-p] max. other models: 1.3% of Vout [Vp-p] max. Current limitation above 105 % of rated output current. hiccup, auto recovery Overvoltage protection by Zehner diode (main output only) 120 % of Vout typ. Short circuit protection continous Max. capacitive load 5.0 12 15 24 ±12 ±15 VDC VDC VDC VDC VDC VDC model: model: model: model: model: model: 2200 µF 1000 µF 680 µF 480 µF 470 µF (each output) 330 µF (each output) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 5 AC/DC Power Modules TMM 24 Series 24 Watt General Specifications Temperature ranges – Operating (natural convection cooling 20 LFM) –40°C to +80°C – Power derating above +65°C 5.0 %/K – Storage (non operating) –40°C to +95°C Over temperature protection shutdown: at 90°C automatic recovery: at approx 67°C Humidity (non condensing) 95 % rel max. Altitude during operation 5000 m Switching frequency (pulse width modulation PWM) 132 kHz typ. Hold-up time 115 VAC: 20 ms typ. 230 VAC: 80 ms typ. Isolation voltage – Input/Output 4‘000 VAC Isolation resistance – at 500 VDC 1‘000 MOhm Reliability /calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >400’000 h EMI / RFI conducted and radiated EN 55022, class B, FCC part 15, level B EN 55011 class B Electromagnets compatibility – Electrostatic discharge ESD (EMC), immunity – RF field immunity – Electrical fast transients – Surge – Conducted RF – Magnetic field immunity – Voltage dip and interruptions (115 VAC / 60 Hz) IEC / EN 61000-4-2, 8kV/4kV perf. criteria A IEC / EN 61000-4-3, 10V/m perf. criteria A IEC / EN 61000-4-4, ±2kV perf. criteria A IEC / EN 61000-4-5, ±1kV perf. criteria A IEC / EN 61000-4-6, 10 Vr.m.s perf. criteria A IEC / EN 61000-4-8, 30 A/m perf. criteria A IEC / EN 61000-4-11 30%,10ms perf. criteria A IEC / EN 61000-4-11 >95%, 5s perf. criteria B Protection class II acording IEC/EN 60536 Safety standards UL 60950-1, IEC/EN 60950-1, IEC 60601-1 3rd edition, 2 x MOPP ANSI/AAMI ES 60601-1:2005(R)2012 UL 508 for chassis mount version – Certification documents www.tracopower.com/overview/tmm24 Casing material plastic resin (UL 94V-0 rated) Environmental compliance – Reach www.tracopower.com/overview/tmm24 – RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 5 AC/DC Power Modules TMM 24 Series 24 Watt DIN-Rail Mounting Kit Adapter for mounting on DIN-rails as per EN 50022-35 (snap-on mounting) DIN-Rail Mounting Kit Order code For models TMP-MK1 TMM 24xxxC Kit contains interface plate, DIN-rail clip and necessary screws. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 4 of 5 AC/DC Power Modules TMM 24 Series 24 Watt Outline Dimensions TMM 24: for PCB mount: 54.0 (2.13) (0.35) 5 6 4 20.7 (0.81) 40.0 (1.57) 2 x M4 THD 74.0 (2.91) 20.7 (0.81) 3 62.0 (2.44) 7 19.5 (0.77) 5.0 8.89 (0.45) (0.20) 11.43 (0.45) 5.0 11.43 (0.20) 8.89 (0.35) Bottom view 6.0 20.32 (0.80) (0.24) 1 2 27.0 (1.06) 0.7 (0.03) 6.0 (0.24) Weight: 137 g (4.83oz) Pin diameter ø 1.0 mm (0.039) TMM 24C: for chassis mount: 54.0 (2.13) 23.3 (0.92) 46.0 (1.81) 3 4 5 6 4.0 5.0 11.8 (0.16) (0.20 (0.46) Pinout / Connection 7 4 x ø3.5 76.0 (2.99) 96.0 (3.78) 86.0 (3.39) Indication LED Pin/con. Single Dual 1 AC (N) AC (N) 2 AC (L) AC(L) 3 No Pin / NC No Pin / NC 4 -Vout -Vout 5 No Pin / NC Common 6 +Vout +Vout 7 No Pin / NC No Pin / NC NC = not to connect 10.0 (0.39) 5.0 2 (0.20) 1 Dimensions in[mm], () = Inches Tolerances = 0.5mm (0.02) Pin diameter ø ±0.1 mm (0.004) Weight: 147 g (5.19oz) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com http://www.tracopower.com Rev. April 21. 2015 Page 5 of 5