WPANT10011-S1B ISM Dual-band Miniature Antenna Description / Application This is an ISM dual-band, low-profile miniature antenna. It can be mounted on any non-metallic surface to achieve optimal performance. This can also be mounted on metallic surfaces with little sacrifice in performance. Small size and ease of integration make this an ideal choice for applications where space is a constraint. This antenna has two installation options: standard 3M double stick tape on one side and slide-and-fit on the other side. Standard cable is 3 feet long 1.32mm U.FL with SMA Male connector. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna solutions. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] VSWR – Typical 900 – 930 MHz 50Ω 2.4 – 2.5 GHz 50Ω < 2:1 < 2:1 Peak Gain [dBi] (Typical) ~ 2 dBi ~ 3 dBi Efficiency [%] (Typical) ~ 55% ~ 65% Polarization Linear Linear Near Omni Directional Near Omni Directional Pattern Mechanical / Environmental Properties Antenna Dimensions Antenna Color Cable Connector Tape Operating / Storage Temperature Environmental Hazardous Materials Rev: 2.0 Created on: February 21, 2014 1.7’’ X 0.8’’ X 0.26’’ (Including 3M tape thickness) Black 3 feet long 1.32mm dia micro coax Straight SMA Male 45 mils 3M VHB double stick o o -40 C to +90 C Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna Rev: 2.0 Created on: February 21, 2014 Created by: MKS Approved by: BP Page | 2