WPANTDP009-R3A GPS L1 Band Active Module Description / Application This is a waterproof magnetic mount antenna that is ideal for automotive amplified GPS applications. This sleek design is an efficient active GPS antenna that only uses 15mA with a supply voltage ranging between 3 and 5 volts. We can assist your engineers to optimize mounting positions for these antennas in your applications and can further customize the antennas for your specific needs. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [] VSWR – Typical LNA Gain [dBi] (Typical) Active Antenna Peak Gain [dBi] Noise Figure (dB) (Typical) Voltage [V] (Typical) 1567 – 1583 MHz 50Ω < 2:1 24 dBi 27 dBi @ Zenith 1.5 dB 3.0 – 5.0 V Axial Ratio (dB) 3.0 dB Polarization RHCP Mechanical / Environmental Properties Antenna Dimensions (L x W x H) Antenna Color Material Cable Connector Operating / Storage Temperature Environmental Hazardous Materials Rev: 1.0 Created on: October 30, 2013 1.82’’ x 1.51’’ x 0.54’’ Black (46.3mm x 38.3mm x 13.8mm) ABS Plastic 5 meter long RG-174 Straight MCX plug o o -40 C to +90 C Meets standards for UL 94V-0 This antenna is built in accordance with: IP 67 RoHS Compliant Created by: TT Approved by: BP Page | 1 Pictures of the Antenna Cable is terminiated by MCX connector. Rev: 1.0 Created on: October 30, 2013 Created by: TT Approved by: BP Page | 2